[PATCH v2 14/17] lpfc: Fix vports not logging into target

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



vports cannot login to target.

For vports, lpfc_nodelist is allocated for targets only on
completion of GFF_ID command. Driver checks if lpfc_nodelist
exists for target before sending GFF_ID. So, GFF_ID and
PLOGI are not sent.

As mentioned by the comment in lpfc_prep_node_fc4type() routine,
do not send GFF_ID only if this NPortID is previously identified
as FCP target. Send GFF_ID if it is a newly identified remote
port from GID_FT response.

Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_ct.c | 31 ++++++++++++++-----------------
 1 file changed, 14 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 24ce96dcc94d..9c0c1463057d 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -503,26 +503,23 @@ lpfc_prep_node_fc4type(struct lpfc_vport *vport, uint32_t Did, uint8_t fc4_type)
 				Did, vport->fc_flag, vport->fc_rscn_id_cnt);
 
 			/*
-			 * This NPortID was previously a FCP target,
+			 * This NPortID was previously a FCP/NVMe target,
 			 * Don't even bother to send GFF_ID.
 			 */
 			ndlp = lpfc_findnode_did(vport, Did);
-			if (ndlp && NLP_CHK_NODE_ACT(ndlp))
-				ndlp->nlp_fc4_type = fc4_type;
-
-			if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
-				ndlp->nlp_fc4_type = fc4_type;
-
-				if (ndlp->nlp_type & NLP_FCP_TARGET)
-					lpfc_setup_disc_node(vport, Did);
-
-				else if (lpfc_ns_cmd(vport, SLI_CTNS_GFF_ID,
-							0, Did) == 0)
-					vport->num_disc_nodes++;
-
-				else
-					lpfc_setup_disc_node(vport, Did);
-			}
+			if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
+			    (ndlp->nlp_type &
+			    (NLP_FCP_TARGET | NLP_NVME_TARGET))) {
+				if (fc4_type == FC_TYPE_FCP)
+					ndlp->nlp_fc4_type |= NLP_FC4_FCP;
+				if (fc4_type == FC_TYPE_NVME)
+					ndlp->nlp_fc4_type |= NLP_FC4_NVME;
+				lpfc_setup_disc_node(vport, Did);
+			} else if (lpfc_ns_cmd(vport, SLI_CTNS_GFF_ID,
+				   0, Did) == 0)
+				vport->num_disc_nodes++;
+			else
+				lpfc_setup_disc_node(vport, Did);
 		} else {
 			lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
 				"Skip2 GID_FTrsp: did:x%x flg:x%x cnt:%d",
-- 
2.11.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux