[PATCH 13/15] lpfc: Fix PRLI retry handling when target rejects it.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The nvmet driver was rejecting the initiator's PRLI because
its reg_rpi for the PLOGI was still outstanding.  The initiator
would resend the PRLI without delay and get the same answer.
The PRLI retries would exhaust causing the nvme initiator to
set the nvmet ndlp to UNMAPPED.

The driver's lpfc_els_retry handler did not have a policy for an
LS_RJT with explanation CMD_IN_PROGRESS for PRLI or NVME_PRLI.
This caused the delay to remain at 0 but retry set 1.

Fix: When the ELS response is LS_RJT, TPC and the command was PRLI
or NVME_PRLI, just set the delay to 1000 mS to get a 1 second
delay on the PRLI retry.  This was enough to allow the REG_RPI to
complete at the target.

Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_els.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 8e532b39ae93..a140318d6159 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -3332,6 +3332,19 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		 */
 		switch (stat.un.b.lsRjtRsnCode) {
 		case LSRJT_UNABLE_TPC:
+			/* The driver has a VALID PLOGI but the rport has
+			 * rejected the PRLI - can't do it now.  Delay
+			 * for 1 second and try again - don't care about
+			 * the explanation.
+			 */
+			if (cmd == ELS_CMD_PRLI || cmd == ELS_CMD_NVMEPRLI) {
+				delay = 1000;
+				maxretry = lpfc_max_els_tries + 1;
+				retry = 1;
+				break;
+			}
+
+			/* Legacy bug fix code for targets with PLOGI delays. */
 			if (stat.un.b.lsRjtRsnCodeExp ==
 			    LSEXP_CMD_IN_PROGRESS) {
 				if (cmd == ELS_CMD_PLOGI) {
@@ -3350,9 +3363,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 				retry = 1;
 				break;
 			}
-			if ((cmd == ELS_CMD_PLOGI) ||
-			    (cmd == ELS_CMD_PRLI) ||
-			    (cmd == ELS_CMD_NVMEPRLI)) {
+			if (cmd == ELS_CMD_PLOGI) {
 				delay = 1000;
 				maxretry = lpfc_max_els_tries + 1;
 				retry = 1;
-- 
2.11.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux