[PATCH V2 11/12] hpsa: remove abort handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 - simplify the driver
 - there are a lot of quirky racy conditions not handled
 - causes more aborts/resets when the number of commands to
   be aborted is large, such as in multi-path fail-overs.
 - has been turned off in our internal driver since 8/31/2015

Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
 drivers/scsi/hpsa.c |  621 +--------------------------------------------------
 drivers/scsi/hpsa.h |    1 
 2 files changed, 8 insertions(+), 614 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 9e18ab1..f1d7d1e 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -258,7 +258,6 @@ static int hpsa_scan_finished(struct Scsi_Host *sh,
 static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
 
 static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
-static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd);
 static int hpsa_slave_alloc(struct scsi_device *sdev);
 static int hpsa_slave_configure(struct scsi_device *sdev);
 static void hpsa_slave_destroy(struct scsi_device *sdev);
@@ -326,7 +325,7 @@ static inline bool hpsa_is_cmd_idle(struct CommandList *c)
 
 static inline bool hpsa_is_pending_event(struct CommandList *c)
 {
-	return c->abort_pending || c->reset_pending;
+	return c->reset_pending;
 }
 
 /* extract sense key, asc, and ascq from sense data.  -1 means invalid. */
@@ -581,12 +580,6 @@ static u32 soft_unresettable_controller[] = {
 	0x409D0E11, /* Smart Array 6400 EM */
 };
 
-static u32 needs_abort_tags_swizzled[] = {
-	0x323D103C, /* Smart Array P700m */
-	0x324a103C, /* Smart Array P712m */
-	0x324b103C, /* SmartArray P711m */
-};
-
 static int board_id_in_array(u32 a[], int nelems, u32 board_id)
 {
 	int i;
@@ -615,12 +608,6 @@ static int ctlr_is_resettable(u32 board_id)
 		ctlr_is_soft_resettable(board_id);
 }
 
-static int ctlr_needs_abort_tags_swizzled(u32 board_id)
-{
-	return board_id_in_array(needs_abort_tags_swizzled,
-			ARRAY_SIZE(needs_abort_tags_swizzled), board_id);
-}
-
 static ssize_t host_show_resettable(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
@@ -928,8 +915,8 @@ static struct device_attribute *hpsa_shost_attrs[] = {
 	NULL,
 };
 
-#define HPSA_NRESERVED_CMDS	(HPSA_CMDS_RESERVED_FOR_ABORTS + \
-		HPSA_CMDS_RESERVED_FOR_DRIVER + HPSA_MAX_CONCURRENT_PASSTHRUS)
+#define HPSA_NRESERVED_CMDS	(HPSA_CMDS_RESERVED_FOR_DRIVER +\
+				 HPSA_MAX_CONCURRENT_PASSTHRUS)
 
 static struct scsi_host_template hpsa_driver_template = {
 	.module			= THIS_MODULE,
@@ -941,7 +928,6 @@ static struct scsi_host_template hpsa_driver_template = {
 	.change_queue_depth	= hpsa_change_queue_depth,
 	.this_id		= -1,
 	.use_clustering		= ENABLE_CLUSTERING,
-	.eh_abort_handler	= hpsa_eh_abort_handler,
 	.eh_device_reset_handler = hpsa_eh_device_reset_handler,
 	.ioctl			= hpsa_ioctl,
 	.slave_alloc		= hpsa_slave_alloc,
@@ -2361,26 +2347,12 @@ static void hpsa_cmd_resolve_events(struct ctlr_info *h,
 	bool do_wake = false;
 
 	/*
-	 * Prevent the following race in the abort handler:
-	 *
-	 * 1. LLD is requested to abort a SCSI command
-	 * 2. The SCSI command completes
-	 * 3. The struct CommandList associated with step 2 is made available
-	 * 4. New I/O request to LLD to another LUN re-uses struct CommandList
-	 * 5. Abort handler follows scsi_cmnd->host_scribble and
-	 *    finds struct CommandList and tries to aborts it
-	 * Now we have aborted the wrong command.
-	 *
-	 * Reset c->scsi_cmd here so that the abort or reset handler will know
+	 * Reset c->scsi_cmd here so that the reset handler will know
 	 * this command has completed.  Then, check to see if the handler is
 	 * waiting for this command, and, if so, wake it.
 	 */
 	c->scsi_cmd = SCSI_CMD_IDLE;
 	mb();	/* Declare command idle before checking for pending events. */
-	if (c->abort_pending) {
-		do_wake = true;
-		c->abort_pending = false;
-	}
 	if (c->reset_pending) {
 		unsigned long flags;
 		struct hpsa_scsi_dev_t *dev;
@@ -2423,20 +2395,6 @@ static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c)
 	queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
 }
 
-static void hpsa_set_scsi_cmd_aborted(struct scsi_cmnd *cmd)
-{
-	cmd->result = DID_ABORT << 16;
-}
-
-static void hpsa_cmd_abort_and_free(struct ctlr_info *h, struct CommandList *c,
-				    struct scsi_cmnd *cmd)
-{
-	hpsa_set_scsi_cmd_aborted(cmd);
-	dev_warn(&h->pdev->dev, "CDB %16phN was aborted with status 0x%x\n",
-			 c->Request.CDB, c->err_info->ScsiStatus);
-	hpsa_cmd_resolve_and_free(h, c);
-}
-
 static void process_ioaccel2_completion(struct ctlr_info *h,
 		struct CommandList *c, struct scsi_cmnd *cmd,
 		struct hpsa_scsi_dev_t *dev)
@@ -2561,12 +2519,9 @@ static void complete_scsi_command(struct CommandList *cp)
 		return hpsa_cmd_free_and_done(h, cp, cmd);
 	}
 
-	if ((unlikely(hpsa_is_pending_event(cp)))) {
+	if ((unlikely(hpsa_is_pending_event(cp))))
 		if (cp->reset_pending)
 			return hpsa_cmd_free_and_done(h, cp, cmd);
-		if (cp->abort_pending)
-			return hpsa_cmd_abort_and_free(h, cp, cmd);
-	}
 
 	if (cp->cmd_type == CMD_IOACCEL2)
 		return process_ioaccel2_completion(h, cp, cmd, dev);
@@ -2686,8 +2641,8 @@ static void complete_scsi_command(struct CommandList *cp)
 			cp->Request.CDB);
 		break;
 	case CMD_ABORTED:
-		/* Return now to avoid calling scsi_done(). */
-		return hpsa_cmd_abort_and_free(h, cp, cmd);
+		cmd->result = DID_ABORT << 16;
+		break;
 	case CMD_ABORT_FAILED:
 		cmd->result = DID_ERROR << 16;
 		dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n",
@@ -3793,53 +3748,6 @@ static unsigned char hpsa_volume_offline(struct ctlr_info *h,
 	return HPSA_LV_OK;
 }
 
-/*
- * Find out if a logical device supports aborts by simply trying one.
- * Smart Array may claim not to support aborts on logical drives, but
- * if a MSA2000 * is connected, the drives on that will be presented
- * by the Smart Array as logical drives, and aborts may be sent to
- * those devices successfully.  So the simplest way to find out is
- * to simply try an abort and see how the device responds.
- */
-static int hpsa_device_supports_aborts(struct ctlr_info *h,
-					unsigned char *scsi3addr)
-{
-	struct CommandList *c;
-	struct ErrorInfo *ei;
-	int rc = 0;
-
-	u64 tag = (u64) -1; /* bogus tag */
-
-	/* Assume that physical devices support aborts */
-	if (!is_logical_dev_addr_mode(scsi3addr))
-		return 1;
-
-	c = cmd_alloc(h);
-
-	(void) fill_cmd(c, HPSA_ABORT_MSG, h, &tag, 0, 0, scsi3addr, TYPE_MSG);
-	(void) hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
-					DEFAULT_TIMEOUT);
-	/* no unmap needed here because no data xfer. */
-	ei = c->err_info;
-	switch (ei->CommandStatus) {
-	case CMD_INVALID:
-		rc = 0;
-		break;
-	case CMD_UNABORTABLE:
-	case CMD_ABORT_FAILED:
-		rc = 1;
-		break;
-	case CMD_TMF_STATUS:
-		rc = hpsa_evaluate_tmf_status(h, c);
-		break;
-	default:
-		rc = 0;
-		break;
-	}
-	cmd_free(h, c);
-	return rc;
-}
-
 static int hpsa_update_device_info(struct ctlr_info *h,
 	unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
 	unsigned char *is_OBDR_device)
@@ -3939,31 +3847,6 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 	return rc;
 }
 
-static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
-			struct hpsa_scsi_dev_t *dev, u8 *scsi3addr)
-{
-	unsigned long flags;
-	int rc, entry;
-	/*
-	 * See if this device supports aborts.  If we already know
-	 * the device, we already know if it supports aborts, otherwise
-	 * we have to find out if it supports aborts by trying one.
-	 */
-	spin_lock_irqsave(&h->devlock, flags);
-	rc = hpsa_scsi_find_entry(dev, h->dev, h->ndevices, &entry);
-	if ((rc == DEVICE_SAME || rc == DEVICE_UPDATED) &&
-		entry >= 0 && entry < h->ndevices) {
-		dev->supports_aborts = h->dev[entry]->supports_aborts;
-		spin_unlock_irqrestore(&h->devlock, flags);
-	} else {
-		spin_unlock_irqrestore(&h->devlock, flags);
-		dev->supports_aborts =
-				hpsa_device_supports_aborts(h, scsi3addr);
-		if (dev->supports_aborts < 0)
-			dev->supports_aborts = 0;
-	}
-}
-
 /*
  * Helper function to assign bus, target, lun mapping of devices.
  * Logical drive target and lun are assigned at this time, but
@@ -4001,35 +3884,6 @@ static void figure_bus_target_lun(struct ctlr_info *h,
 				0, lunid & 0x3fff);
 }
 
-
-/*
- * Get address of physical disk used for an ioaccel2 mode command:
- *	1. Extract ioaccel2 handle from the command.
- *	2. Find a matching ioaccel2 handle from list of physical disks.
- *	3. Return:
- *		1 and set scsi3addr to address of matching physical
- *		0 if no matching physical disk was found.
- */
-static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
-	struct CommandList *ioaccel2_cmd_to_abort, unsigned char *scsi3addr)
-{
-	struct io_accel2_cmd *c2 =
-			&h->ioaccel2_cmd_pool[ioaccel2_cmd_to_abort->cmdindex];
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&h->devlock, flags);
-	for (i = 0; i < h->ndevices; i++)
-		if (h->dev[i]->ioaccel_handle == le32_to_cpu(c2->scsi_nexus)) {
-			memcpy(scsi3addr, h->dev[i]->scsi3addr,
-				sizeof(h->dev[i]->scsi3addr));
-			spin_unlock_irqrestore(&h->devlock, flags);
-			return 1;
-		}
-	spin_unlock_irqrestore(&h->devlock, flags);
-	return 0;
-}
-
 static int  figure_external_status(struct ctlr_info *h, int raid_ctlr_position,
 	int i, int nphysicals, int nlocal_logicals)
 {
@@ -4394,7 +4248,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
 		}
 
 		figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
-		hpsa_update_device_supports_aborts(h, tmpdevice, lunaddrbytes);
 		this_device = currentsd[ncurrent];
 
 		/* Turn on discovery_polling if there are ext target devices.
@@ -5528,8 +5381,6 @@ static void hpsa_command_resubmit_worker(struct work_struct *work)
 	}
 	if (c->reset_pending)
 		return hpsa_cmd_free_and_done(c->h, c, cmd);
-	if (c->abort_pending)
-		return hpsa_cmd_abort_and_free(c->h, c, cmd);
 	if (c->cmd_type == CMD_IOACCEL2) {
 		struct ctlr_info *h = c->h;
 		struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
@@ -5987,433 +5838,6 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
 	return rc;
 }
 
-static void swizzle_abort_tag(u8 *tag)
-{
-	u8 original_tag[8];
-
-	memcpy(original_tag, tag, 8);
-	tag[0] = original_tag[3];
-	tag[1] = original_tag[2];
-	tag[2] = original_tag[1];
-	tag[3] = original_tag[0];
-	tag[4] = original_tag[7];
-	tag[5] = original_tag[6];
-	tag[6] = original_tag[5];
-	tag[7] = original_tag[4];
-}
-
-static void hpsa_get_tag(struct ctlr_info *h,
-	struct CommandList *c, __le32 *taglower, __le32 *tagupper)
-{
-	u64 tag;
-	if (c->cmd_type == CMD_IOACCEL1) {
-		struct io_accel1_cmd *cm1 = (struct io_accel1_cmd *)
-			&h->ioaccel_cmd_pool[c->cmdindex];
-		tag = le64_to_cpu(cm1->tag);
-		*tagupper = cpu_to_le32(tag >> 32);
-		*taglower = cpu_to_le32(tag);
-		return;
-	}
-	if (c->cmd_type == CMD_IOACCEL2) {
-		struct io_accel2_cmd *cm2 = (struct io_accel2_cmd *)
-			&h->ioaccel2_cmd_pool[c->cmdindex];
-		/* upper tag not used in ioaccel2 mode */
-		memset(tagupper, 0, sizeof(*tagupper));
-		*taglower = cm2->Tag;
-		return;
-	}
-	tag = le64_to_cpu(c->Header.tag);
-	*tagupper = cpu_to_le32(tag >> 32);
-	*taglower = cpu_to_le32(tag);
-}
-
-static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
-	struct CommandList *abort, int reply_queue)
-{
-	int rc = IO_OK;
-	struct CommandList *c;
-	struct ErrorInfo *ei;
-	__le32 tagupper, taglower;
-
-	c = cmd_alloc(h);
-
-	/* fill_cmd can't fail here, no buffer to map */
-	(void) fill_cmd(c, HPSA_ABORT_MSG, h, &abort->Header.tag,
-		0, 0, scsi3addr, TYPE_MSG);
-	if (h->needs_abort_tags_swizzled)
-		swizzle_abort_tag(&c->Request.CDB[4]);
-	(void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
-	hpsa_get_tag(h, abort, &taglower, &tagupper);
-	dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: do_simple_cmd(abort) completed.\n",
-		__func__, tagupper, taglower);
-	/* no unmap needed here because no data xfer. */
-
-	ei = c->err_info;
-	switch (ei->CommandStatus) {
-	case CMD_SUCCESS:
-		break;
-	case CMD_TMF_STATUS:
-		rc = hpsa_evaluate_tmf_status(h, c);
-		break;
-	case CMD_UNABORTABLE: /* Very common, don't make noise. */
-		rc = -1;
-		break;
-	default:
-		dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: interpreting error.\n",
-			__func__, tagupper, taglower);
-		hpsa_scsi_interpret_error(h, c);
-		rc = -1;
-		break;
-	}
-	cmd_free(h, c);
-	dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n",
-		__func__, tagupper, taglower);
-	return rc;
-}
-
-static void setup_ioaccel2_abort_cmd(struct CommandList *c, struct ctlr_info *h,
-	struct CommandList *command_to_abort, int reply_queue)
-{
-	struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
-	struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2;
-	struct io_accel2_cmd *c2a =
-		&h->ioaccel2_cmd_pool[command_to_abort->cmdindex];
-	struct scsi_cmnd *scmd = command_to_abort->scsi_cmd;
-	struct hpsa_scsi_dev_t *dev = scmd->device->hostdata;
-
-	if (!dev)
-		return;
-
-	/*
-	 * We're overlaying struct hpsa_tmf_struct on top of something which
-	 * was allocated as a struct io_accel2_cmd, so we better be sure it
-	 * actually fits, and doesn't overrun the error info space.
-	 */
-	BUILD_BUG_ON(sizeof(struct hpsa_tmf_struct) >
-			sizeof(struct io_accel2_cmd));
-	BUG_ON(offsetof(struct io_accel2_cmd, error_data) <
-			offsetof(struct hpsa_tmf_struct, error_len) +
-				sizeof(ac->error_len));
-
-	c->cmd_type = IOACCEL2_TMF;
-	c->scsi_cmd = SCSI_CMD_BUSY;
-
-	/* Adjust the DMA address to point to the accelerated command buffer */
-	c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
-				(c->cmdindex * sizeof(struct io_accel2_cmd));
-	BUG_ON(c->busaddr & 0x0000007F);
-
-	memset(ac, 0, sizeof(*c2)); /* yes this is correct */
-	ac->iu_type = IOACCEL2_IU_TMF_TYPE;
-	ac->reply_queue = reply_queue;
-	ac->tmf = IOACCEL2_TMF_ABORT;
-	ac->it_nexus = cpu_to_le32(dev->ioaccel_handle);
-	memset(ac->lun_id, 0, sizeof(ac->lun_id));
-	ac->tag = cpu_to_le64(c->cmdindex << DIRECT_LOOKUP_SHIFT);
-	ac->abort_tag = cpu_to_le64(le32_to_cpu(c2a->Tag));
-	ac->error_ptr = cpu_to_le64(c->busaddr +
-			offsetof(struct io_accel2_cmd, error_data));
-	ac->error_len = cpu_to_le32(sizeof(c2->error_data));
-}
-
-/* ioaccel2 path firmware cannot handle abort task requests.
- * Change abort requests to physical target reset, and send to the
- * address of the physical disk used for the ioaccel 2 command.
- * Return 0 on success (IO_OK)
- *	 -1 on failure
- */
-
-static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h,
-	unsigned char *scsi3addr, struct CommandList *abort, int reply_queue)
-{
-	int rc = IO_OK;
-	struct scsi_cmnd *scmd; /* scsi command within request being aborted */
-	struct hpsa_scsi_dev_t *dev; /* device to which scsi cmd was sent */
-	unsigned char phys_scsi3addr[8]; /* addr of phys disk with volume */
-	unsigned char *psa = &phys_scsi3addr[0];
-
-	/* Get a pointer to the hpsa logical device. */
-	scmd = abort->scsi_cmd;
-	dev = (struct hpsa_scsi_dev_t *)(scmd->device->hostdata);
-	if (dev == NULL) {
-		dev_warn(&h->pdev->dev,
-			"Cannot abort: no device pointer for command.\n");
-			return -1; /* not abortable */
-	}
-
-	if (h->raid_offload_debug > 0)
-		dev_info(&h->pdev->dev,
-			"scsi %d:%d:%d:%d %s scsi3addr 0x%8phN\n",
-			h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
-			"Reset as abort", scsi3addr);
-
-	if (!dev->offload_enabled) {
-		dev_warn(&h->pdev->dev,
-			"Can't abort: device is not operating in HP SSD Smart Path mode.\n");
-		return -1; /* not abortable */
-	}
-
-	/* Incoming scsi3addr is logical addr. We need physical disk addr. */
-	if (!hpsa_get_pdisk_of_ioaccel2(h, abort, psa)) {
-		dev_warn(&h->pdev->dev, "Can't abort: Failed lookup of physical address.\n");
-		return -1; /* not abortable */
-	}
-
-	/* send the reset */
-	if (h->raid_offload_debug > 0)
-		dev_info(&h->pdev->dev,
-			"Reset as abort: Resetting physical device at scsi3addr 0x%8phN\n",
-			psa);
-	rc = hpsa_do_reset(h, dev, psa, HPSA_PHYS_TARGET_RESET, reply_queue);
-	if (rc != 0) {
-		dev_warn(&h->pdev->dev,
-			"Reset as abort: Failed on physical device at scsi3addr 0x%8phN\n",
-			psa);
-		return rc; /* failed to reset */
-	}
-
-	/* wait for device to recover */
-	if (wait_for_device_to_become_ready(h, psa, reply_queue) != 0) {
-		dev_warn(&h->pdev->dev,
-			"Reset as abort: Failed: Device never recovered from reset: 0x%8phN\n",
-			psa);
-		return -1;  /* failed to recover */
-	}
-
-	/* device recovered */
-	dev_info(&h->pdev->dev,
-		"Reset as abort: Device recovered from reset: scsi3addr 0x%8phN\n",
-		psa);
-
-	return rc; /* success */
-}
-
-static int hpsa_send_abort_ioaccel2(struct ctlr_info *h,
-	struct CommandList *abort, int reply_queue)
-{
-	int rc = IO_OK;
-	struct CommandList *c;
-	__le32 taglower, tagupper;
-	struct hpsa_scsi_dev_t *dev;
-	struct io_accel2_cmd *c2;
-
-	dev = abort->scsi_cmd->device->hostdata;
-	if (!dev)
-		return -1;
-
-	if (!dev->offload_enabled && !dev->hba_ioaccel_enabled)
-		return -1;
-
-	c = cmd_alloc(h);
-	setup_ioaccel2_abort_cmd(c, h, abort, reply_queue);
-	c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
-	(void) hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
-	hpsa_get_tag(h, abort, &taglower, &tagupper);
-	dev_dbg(&h->pdev->dev,
-		"%s: Tag:0x%08x:%08x: do_simple_cmd(ioaccel2 abort) completed.\n",
-		__func__, tagupper, taglower);
-	/* no unmap needed here because no data xfer. */
-
-	dev_dbg(&h->pdev->dev,
-		"%s: Tag:0x%08x:%08x: abort service response = 0x%02x.\n",
-		__func__, tagupper, taglower, c2->error_data.serv_response);
-	switch (c2->error_data.serv_response) {
-	case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE:
-	case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS:
-		rc = 0;
-		break;
-	case IOACCEL2_SERV_RESPONSE_TMF_REJECTED:
-	case IOACCEL2_SERV_RESPONSE_FAILURE:
-	case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN:
-		rc = -1;
-		break;
-	default:
-		dev_warn(&h->pdev->dev,
-			"%s: Tag:0x%08x:%08x: unknown abort service response 0x%02x\n",
-			__func__, tagupper, taglower,
-			c2->error_data.serv_response);
-		rc = -1;
-	}
-	cmd_free(h, c);
-	dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: Finished.\n", __func__,
-		tagupper, taglower);
-	return rc;
-}
-
-static int hpsa_send_abort_both_ways(struct ctlr_info *h,
-	struct hpsa_scsi_dev_t *dev, struct CommandList *abort, int reply_queue)
-{
-	/*
-	 * ioccelerator mode 2 commands should be aborted via the
-	 * accelerated path, since RAID path is unaware of these commands,
-	 * but not all underlying firmware can handle abort TMF.
-	 * Change abort to physical device reset when abort TMF is unsupported.
-	 */
-	if (abort->cmd_type == CMD_IOACCEL2) {
-		if ((HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags) ||
-			dev->physical_device)
-			return hpsa_send_abort_ioaccel2(h, abort,
-						reply_queue);
-		else
-			return hpsa_send_reset_as_abort_ioaccel2(h,
-							dev->scsi3addr,
-							abort, reply_queue);
-	}
-	return hpsa_send_abort(h, dev->scsi3addr, abort, reply_queue);
-}
-
-/* Find out which reply queue a command was meant to return on */
-static int hpsa_extract_reply_queue(struct ctlr_info *h,
-					struct CommandList *c)
-{
-	if (c->cmd_type == CMD_IOACCEL2)
-		return h->ioaccel2_cmd_pool[c->cmdindex].reply_queue;
-	return c->Header.ReplyQueue;
-}
-
-/*
- * Limit concurrency of abort commands to prevent
- * over-subscription of commands
- */
-static inline int wait_for_available_abort_cmd(struct ctlr_info *h)
-{
-#define ABORT_CMD_WAIT_MSECS 5000
-	return !wait_event_timeout(h->abort_cmd_wait_queue,
-			atomic_dec_if_positive(&h->abort_cmds_available) >= 0,
-			msecs_to_jiffies(ABORT_CMD_WAIT_MSECS));
-}
-
-/* Send an abort for the specified command.
- *	If the device and controller support it,
- *		send a task abort request.
- */
-static int hpsa_eh_abort_handler(struct scsi_cmnd *sc)
-{
-
-	int rc;
-	struct ctlr_info *h;
-	struct hpsa_scsi_dev_t *dev;
-	struct CommandList *abort; /* pointer to command to be aborted */
-	struct scsi_cmnd *as;	/* ptr to scsi cmd inside aborted command. */
-	char msg[256];		/* For debug messaging. */
-	int ml = 0;
-	__le32 tagupper, taglower;
-	int refcount, reply_queue;
-
-	if (sc == NULL)
-		return FAILED;
-
-	if (sc->device == NULL)
-		return FAILED;
-
-	/* Find the controller of the command to be aborted */
-	h = sdev_to_hba(sc->device);
-	if (h == NULL)
-		return FAILED;
-
-	/* Find the device of the command to be aborted */
-	dev = sc->device->hostdata;
-	if (!dev) {
-		dev_err(&h->pdev->dev, "%s FAILED, Device lookup failed.\n",
-				msg);
-		return FAILED;
-	}
-
-	/* If controller locked up, we can guarantee command won't complete */
-	if (lockup_detected(h)) {
-		hpsa_show_dev_msg(KERN_WARNING, h, dev,
-					"ABORT FAILED, lockup detected");
-		return FAILED;
-	}
-
-	/* This is a good time to check if controller lockup has occurred */
-	if (detect_controller_lockup(h)) {
-		hpsa_show_dev_msg(KERN_WARNING, h, dev,
-					"ABORT FAILED, new lockup detected");
-		return FAILED;
-	}
-
-	/* Check that controller supports some kind of task abort */
-	if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags) &&
-		!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags))
-		return FAILED;
-
-	memset(msg, 0, sizeof(msg));
-	ml += sprintf(msg+ml, "scsi %d:%d:%d:%llu %s %p",
-		h->scsi_host->host_no, sc->device->channel,
-		sc->device->id, sc->device->lun,
-		"Aborting command", sc);
-
-	/* Get SCSI command to be aborted */
-	abort = (struct CommandList *) sc->host_scribble;
-	if (abort == NULL) {
-		/* This can happen if the command already completed. */
-		return SUCCESS;
-	}
-	refcount = atomic_inc_return(&abort->refcount);
-	if (refcount == 1) { /* Command is done already. */
-		cmd_free(h, abort);
-		return SUCCESS;
-	}
-
-	/* Don't bother trying the abort if we know it won't work. */
-	if (abort->cmd_type != CMD_IOACCEL2 &&
-		abort->cmd_type != CMD_IOACCEL1 && !dev->supports_aborts) {
-		cmd_free(h, abort);
-		return FAILED;
-	}
-
-	/*
-	 * Check that we're aborting the right command.
-	 * It's possible the CommandList already completed and got re-used.
-	 */
-	if (abort->scsi_cmd != sc) {
-		cmd_free(h, abort);
-		return SUCCESS;
-	}
-
-	abort->abort_pending = true;
-	hpsa_get_tag(h, abort, &taglower, &tagupper);
-	reply_queue = hpsa_extract_reply_queue(h, abort);
-	ml += sprintf(msg+ml, "Tag:0x%08x:%08x ", tagupper, taglower);
-	as  = abort->scsi_cmd;
-	if (as != NULL)
-		ml += sprintf(msg+ml,
-			"CDBLen: %d CDB: 0x%02x%02x... SN: 0x%lx ",
-			as->cmd_len, as->cmnd[0], as->cmnd[1],
-			as->serial_number);
-	dev_warn(&h->pdev->dev, "%s BEING SENT\n", msg);
-	hpsa_show_dev_msg(KERN_WARNING, h, dev, "Aborting command");
-
-	/*
-	 * Command is in flight, or possibly already completed
-	 * by the firmware (but not to the scsi mid layer) but we can't
-	 * distinguish which.  Send the abort down.
-	 */
-	if (wait_for_available_abort_cmd(h)) {
-		dev_warn(&h->pdev->dev,
-			"%s FAILED, timeout waiting for an abort command to become available.\n",
-			msg);
-		cmd_free(h, abort);
-		return FAILED;
-	}
-	rc = hpsa_send_abort_both_ways(h, dev, abort, reply_queue);
-	atomic_inc(&h->abort_cmds_available);
-	wake_up_all(&h->abort_cmd_wait_queue);
-	if (rc != 0) {
-		dev_warn(&h->pdev->dev, "%s SENT, FAILED\n", msg);
-		hpsa_show_dev_msg(KERN_WARNING, h, dev,
-				"FAILED to abort command");
-		cmd_free(h, abort);
-		return FAILED;
-	}
-	dev_info(&h->pdev->dev, "%s SENT, SUCCESS\n", msg);
-	wait_event(h->event_sync_wait_queue,
-		   abort->scsi_cmd != sc || lockup_detected(h));
-	cmd_free(h, abort);
-	return !lockup_detected(h) ? SUCCESS : FAILED;
-}
-
 /*
  * For operations with an associated SCSI command, a command block is allocated
  * at init, and managed by cmd_tagged_alloc() and cmd_tagged_free() using the
@@ -6459,9 +5883,7 @@ static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c)
 {
 	/*
 	 * Release our reference to the block.  We don't need to do anything
-	 * else to free it, because it is accessed by index.  (There's no point
-	 * in checking the result of the decrement, since we cannot guarantee
-	 * that there isn't a concurrent abort which is also accessing it.)
+	 * else to free it, because it is accessed by index.
 	 */
 	(void)atomic_dec(&c->refcount);
 }
@@ -7000,7 +6422,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 	int cmd_type)
 {
 	int pci_dir = XFER_NONE;
-	u64 tag; /* for commands to be aborted */
 
 	c->cmd_type = CMD_IOCTL_PEND;
 	c->scsi_cmd = SCSI_CMD_BUSY;
@@ -7184,27 +6605,6 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 			c->Request.CDB[6] = 0x00;
 			c->Request.CDB[7] = 0x00;
 			break;
-		case  HPSA_ABORT_MSG:
-			memcpy(&tag, buff, sizeof(tag));
-			dev_dbg(&h->pdev->dev,
-				"Abort Tag:0x%016llx using rqst Tag:0x%016llx",
-				tag, c->Header.tag);
-			c->Request.CDBLen = 16;
-			c->Request.type_attr_dir =
-					TYPE_ATTR_DIR(cmd_type,
-						ATTR_SIMPLE, XFER_WRITE);
-			c->Request.Timeout = 0; /* Don't time out */
-			c->Request.CDB[0] = HPSA_TASK_MANAGEMENT;
-			c->Request.CDB[1] = HPSA_TMF_ABORT_TASK;
-			c->Request.CDB[2] = 0x00; /* reserved */
-			c->Request.CDB[3] = 0x00; /* reserved */
-			/* Tag to abort goes in CDB[4]-CDB[11] */
-			memcpy(&c->Request.CDB[4], &tag, sizeof(tag));
-			c->Request.CDB[12] = 0x00; /* reserved */
-			c->Request.CDB[13] = 0x00; /* reserved */
-			c->Request.CDB[14] = 0x00; /* reserved */
-			c->Request.CDB[15] = 0x00; /* reserved */
-		break;
 		default:
 			dev_warn(&h->pdev->dev, "unknown message type %d\n",
 				cmd);
@@ -8162,9 +7562,6 @@ static int hpsa_pci_init(struct ctlr_info *h)
 	h->product_name = products[prod_index].product_name;
 	h->access = *(products[prod_index].access);
 
-	h->needs_abort_tags_swizzled =
-		ctlr_needs_abort_tags_swizzled(h->board_id);
-
 	pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
 			       PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
 
@@ -8885,7 +8282,6 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	spin_lock_init(&h->scan_lock);
 	spin_lock_init(&h->reset_lock);
 	atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);
-	atomic_set(&h->abort_cmds_available, HPSA_CMDS_RESERVED_FOR_ABORTS);
 
 	/* Allocate and clear per-cpu variable lockup_detected */
 	h->lockup_detected = alloc_percpu(u32);
@@ -8937,7 +8333,6 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		goto clean5;	/* cmd, irq, shost, pci, lu, aer/h */
 	init_waitqueue_head(&h->scan_wait_queue);
-	init_waitqueue_head(&h->abort_cmd_wait_queue);
 	init_waitqueue_head(&h->event_sync_wait_queue);
 	mutex_init(&h->reset_mutex);
 	h->scan_finished = 1; /* no scan currently in progress */
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index c9c4927..1c49741 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -298,7 +298,6 @@ struct ctlr_info {
 	struct workqueue_struct *resubmit_wq;
 	struct workqueue_struct *rescan_ctlr_wq;
 	atomic_t abort_cmds_available;
-	wait_queue_head_t abort_cmd_wait_queue;
 	wait_queue_head_t event_sync_wait_queue;
 	struct mutex reset_mutex;
 	u8 reset_in_progress;




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux