Misc Fixes:
- Fix some sparse warnings - casts of address space
- Fix handling of the adapter registration string. Each invocation
was byteswapping, so every other adapter init attempt failed.
- Correct comments and default value for the lpfc_max_luns parameter
Signed-off-by: James Smart <James.Smart@xxxxxxxxxx>
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c 2006-07-06 15:04:45.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_attr.c 2006-07-06 15:09:56.000000000 -0400
@@ -706,12 +706,12 @@ LPFC_ATTR(discovery_threads, 32, 1, 64,
"during discovery");
/*
-# lpfc_max_luns: maximum number of LUNs per target driver will support
-# Value range is [1,32768]. Default value is 256.
-# NOTE: The SCSI layer will scan each target for this many luns
+# lpfc_max_luns: maximum allowed LUN.
+# Value range is [0,65535]. Default value is 255.
+# NOTE: The SCSI layer might probe all allowed LUN on some old targets.
*/
-LPFC_ATTR_R(max_luns, 256, 1, 32768,
- "Maximum number of LUNs per target driver will support");
+LPFC_ATTR_R(max_luns, 255, 0, 65535,
+ "Maximum allowed LUN");
/*
# lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring.
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2006-07-06 15:07:40.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_init.c 2006-07-06 15:09:56.000000000 -0400
@@ -71,6 +71,7 @@ lpfc_config_port_prep(struct lpfc_hba *
uint16_t offset = 0;
static char licensed[56] =
"key unlock for use with gnu public licensed code only\0";
+ static int init_key = 1;
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
@@ -82,10 +83,13 @@ lpfc_config_port_prep(struct lpfc_hba *
phba->hba_state = LPFC_INIT_MBX_CMDS;
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
- uint32_t *ptext = (uint32_t *) licensed;
+ if (init_key) {
+ uint32_t *ptext = (uint32_t *) licensed;
- for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
- *ptext = cpu_to_be32(*ptext);
+ for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
+ *ptext = cpu_to_be32(*ptext);
+ init_key = 0;
+ }
lpfc_read_nv(phba, pmb);
memset((char*)mb->un.varRDnvp.rsvd3, 0,
diff -upNr a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
--- a/drivers/scsi/lpfc/lpfc_sli.c 2006-07-06 15:07:40.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_sli.c 2006-07-06 15:09:56.000000000 -0400
@@ -1547,8 +1547,8 @@ lpfc_sli_brdready(struct lpfc_hba * phba
void lpfc_reset_barrier(struct lpfc_hba * phba)
{
- uint32_t * resp_buf;
- uint32_t * mbox_buf;
+ uint32_t __iomem *resp_buf;
+ uint32_t __iomem *mbox_buf;
volatile uint32_t mbox;
uint32_t hc_copy;
int i;
@@ -1564,7 +1564,7 @@ void lpfc_reset_barrier(struct lpfc_hba
* Tell the other part of the chip to suspend temporarily all
* its DMA activity.
*/
- resp_buf = (uint32_t *)phba->MBslimaddr;
+ resp_buf = phba->MBslimaddr;
/* Disable the error attention */
hc_copy = readl(phba->HCregaddr);
@@ -1582,7 +1582,7 @@ void lpfc_reset_barrier(struct lpfc_hba
((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
- mbox_buf = (uint32_t *)phba->MBslimaddr;
+ mbox_buf = phba->MBslimaddr;
writel(mbox, mbox_buf);
for (i = 0;
@@ -1782,7 +1782,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * ph
skip_post = 0;
word0 = 0; /* This is really setting up word1 */
}
- to_slim = (uint8_t *) phba->MBslimaddr + sizeof (uint32_t);
+ to_slim = phba->MBslimaddr + sizeof (uint32_t);
writel(*(uint32_t *) mb, to_slim);
readl(to_slim); /* flush */
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
