Am 22.03.2017 19:50, schrieb Colin King:
> From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>
> Currently the misx and intx variables of the interrupt enable/disable
> helper functions are built in no matter what the setting of the
> macro PM8001_USE_MSIX. Clean this up by just building in the
> necessary helper functions and calls to these functions depending on
> the setting of PM8001_USE_MSIX. This addresses several dead code
> paths found by static analysis with CoverityScan.
>
> Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> ---
> drivers/scsi/pm8001/pm8001_hwi.c | 63 +++++++++++++++++++++-------------------
> 1 file changed, 33 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
> index 10546faac58c..d1be10fd1350 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -1204,26 +1204,7 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
> }
> }
>
> -/**
> - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
> - * @pm8001_ha: our hba card information
> - */
> -static void
> -pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
> -{
> - pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
> - pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
> -}
> -
> - /**
> - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
> - * @pm8001_ha: our hba card information
> - */
> -static void
> -pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
> -{
> - pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
> -}
> +#ifdef PM8001_USE_MSIX
>
> /**
> * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt
> @@ -1257,6 +1238,30 @@ pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
> pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_DISABLE);
> }
>
> +#else
> +
> +/**
> + * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
> + * @pm8001_ha: our hba card information
> + */
> +static void
> +pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
> +{
> + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
> + pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
> +}
> +
> + /**
> + * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
> + * @pm8001_ha: our hba card information
> + */
> +static void
> +pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
> +{
> + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
> +}
> +#endif
> +
> /**
> * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
> * @pm8001_ha: our hba card information
> @@ -1266,10 +1271,9 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
> {
> #ifdef PM8001_USE_MSIX
> pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
> - return;
> -#endif
> +#else
> pm8001_chip_intx_interrupt_enable(pm8001_ha);
> -
> +#endif
> }
>
> /**
> @@ -1281,10 +1285,9 @@ pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
> {
> #ifdef PM8001_USE_MSIX
> pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
> - return;
> -#endif
> +#else
> pm8001_chip_intx_interrupt_disable(pm8001_ha);
> -
> +#endif
> }
>
> /**
> @@ -4613,15 +4616,15 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
>
> static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
> {
> - u32 value;
> #ifdef PM8001_USE_MSIX
> return 1;
> -#endif
> - value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
> +#else
> + u32 value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
> +
> if (value)
> return 1;
> return 0;
> -
> +#endif
> }
>
This is a bit strange, why do this function return u32 ?
re,
wh
> /**
