Nine small fixes: the biggest is probably finally sorting out Kconfig
issues with lpfc nvme. There are some performance fixes for megaraid
and hpsa and a static checker fix.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Don Brace (3):
scsi: hpsa: do not timeout reset operations
scsi: hpsa: limit outstanding rescans
scsi: hpsa: update check for logical volume status
James Smart (1):
scsi: lpfc: Finalize Kconfig options for nvme
Shivasharan S (4):
scsi: megaraid_sas: Driver version upgrade
scsi: megaraid_sas: raid6 also require cpuSel check same as raid5
scsi: megaraid_sas: add correct return type check for ldio hint logic for raid1
scsi: megaraid_sas: enable intx only if msix request fails
Tomas Winkler (1):
scsi: ufs: don't check unsigned type for a negative value
And the diffstat:
drivers/scsi/Kconfig | 14 --------
drivers/scsi/hpsa.c | 53 +++++++++++++++++------------
drivers/scsi/hpsa.h | 1 +
drivers/scsi/hpsa_cmd.h | 2 ++
drivers/scsi/lpfc/lpfc_attr.c | 4 +--
drivers/scsi/lpfc/lpfc_init.c | 7 ++++
drivers/scsi/lpfc/lpfc_nvme.c | 8 ++---
drivers/scsi/lpfc/lpfc_nvmet.c | 8 ++---
drivers/scsi/megaraid/megaraid_sas.h | 4 +--
drivers/scsi/megaraid/megaraid_sas_base.c | 17 ++++++---
drivers/scsi/megaraid/megaraid_sas_fusion.c | 4 +--
drivers/scsi/ufs/ufshcd.c | 2 +-
12 files changed, 69 insertions(+), 55 deletions(-)
James
---
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 4bf55b5..3c52867 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1253,20 +1253,6 @@ config SCSI_LPFC_DEBUG_FS
This makes debugging information from the lpfc driver
available via the debugfs filesystem.
-config LPFC_NVME_INITIATOR
- bool "Emulex LightPulse Fibre Channel NVME Initiator Support"
- depends on SCSI_LPFC && NVME_FC
- ---help---
- This enables NVME Initiator support in the Emulex lpfc driver.
-
-config LPFC_NVME_TARGET
- bool "Emulex LightPulse Fibre Channel NVME Initiator Support"
- depends on SCSI_LPFC && NVME_TARGET_FC
- ---help---
- This enables NVME Target support in the Emulex lpfc driver.
- Target enablement must still be enabled on a per adapter
- basis by module parameters.
-
config SCSI_SIM710
tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
depends on (EISA || MCA) && SCSI
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 524a0c7..0d0be77 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2956,7 +2956,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
/* fill_cmd can't fail here, no data buffer to map. */
(void) fill_cmd(c, reset_type, h, NULL, 0, 0,
scsi3addr, TYPE_MSG);
- rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, DEFAULT_TIMEOUT);
+ rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
if (rc) {
dev_warn(&h->pdev->dev, "Failed to send reset command\n");
goto out;
@@ -3714,7 +3714,7 @@ static int hpsa_get_volume_status(struct ctlr_info *h,
* # (integer code indicating one of several NOT READY states
* describing why a volume is to be kept offline)
*/
-static int hpsa_volume_offline(struct ctlr_info *h,
+static unsigned char hpsa_volume_offline(struct ctlr_info *h,
unsigned char scsi3addr[])
{
struct CommandList *c;
@@ -3735,7 +3735,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
DEFAULT_TIMEOUT);
if (rc) {
cmd_free(h, c);
- return 0;
+ return HPSA_VPD_LV_STATUS_UNSUPPORTED;
}
sense = c->err_info->SenseInfo;
if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
@@ -3746,19 +3746,13 @@ static int hpsa_volume_offline(struct ctlr_info *h,
cmd_status = c->err_info->CommandStatus;
scsi_status = c->err_info->ScsiStatus;
cmd_free(h, c);
- /* Is the volume 'not ready'? */
- if (cmd_status != CMD_TARGET_STATUS ||
- scsi_status != SAM_STAT_CHECK_CONDITION ||
- sense_key != NOT_READY ||
- asc != ASC_LUN_NOT_READY) {
- return 0;
- }
/* Determine the reason for not ready state */
ldstat = hpsa_get_volume_status(h, scsi3addr);
/* Keep volume offline in certain cases: */
switch (ldstat) {
+ case HPSA_LV_FAILED:
case HPSA_LV_UNDERGOING_ERASE:
case HPSA_LV_NOT_AVAILABLE:
case HPSA_LV_UNDERGOING_RPI:
@@ -3780,7 +3774,7 @@ static int hpsa_volume_offline(struct ctlr_info *h,
default:
break;
}
- return 0;
+ return HPSA_LV_OK;
}
/*
@@ -3853,10 +3847,10 @@ static int hpsa_update_device_info(struct ctlr_info *h,
/* Do an inquiry to the device to see what it is. */
if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
(unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
- /* Inquiry failed (msg printed already) */
dev_err(&h->pdev->dev,
- "hpsa_update_device_info: inquiry failed\n");
- rc = -EIO;
+ "%s: inquiry failed, device will be skipped.\n",
+ __func__);
+ rc = HPSA_INQUIRY_FAILED;
goto bail_out;
}
@@ -3885,15 +3879,19 @@ static int hpsa_update_device_info(struct ctlr_info *h,
if ((this_device->devtype == TYPE_DISK ||
this_device->devtype == TYPE_ZBC) &&
is_logical_dev_addr_mode(scsi3addr)) {
- int volume_offline;
+ unsigned char volume_offline;
hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC)
hpsa_get_ioaccel_status(h, scsi3addr, this_device);
volume_offline = hpsa_volume_offline(h, scsi3addr);
- if (volume_offline < 0 || volume_offline > 0xff)
- volume_offline = HPSA_VPD_LV_STATUS_UNSUPPORTED;
- this_device->volume_offline = volume_offline & 0xff;
+ if (volume_offline == HPSA_LV_FAILED) {
+ rc = HPSA_LV_FAILED;
+ dev_err(&h->pdev->dev,
+ "%s: LV failed, device will be skipped.\n",
+ __func__);
+ goto bail_out;
+ }
} else {
this_device->raid_level = RAID_UNKNOWN;
this_device->offload_config = 0;
@@ -4379,8 +4377,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h)
goto out;
}
if (rc) {
- dev_warn(&h->pdev->dev,
- "Inquiry failed, skipping device.\n");
+ h->drv_req_rescan = 1;
continue;
}
@@ -5558,7 +5555,7 @@ static void hpsa_scan_complete(struct ctlr_info *h)
spin_lock_irqsave(&h->scan_lock, flags);
h->scan_finished = 1;
- wake_up_all(&h->scan_wait_queue);
+ wake_up(&h->scan_wait_queue);
spin_unlock_irqrestore(&h->scan_lock, flags);
}
@@ -5576,11 +5573,23 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
if (unlikely(lockup_detected(h)))
return hpsa_scan_complete(h);
+ /*
+ * If a scan is already waiting to run, no need to add another
+ */
+ spin_lock_irqsave(&h->scan_lock, flags);
+ if (h->scan_waiting) {
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+ return;
+ }
+
+ spin_unlock_irqrestore(&h->scan_lock, flags);
+
/* wait until any scan already in progress is finished. */
while (1) {
spin_lock_irqsave(&h->scan_lock, flags);
if (h->scan_finished)
break;
+ h->scan_waiting = 1;
spin_unlock_irqrestore(&h->scan_lock, flags);
wait_event(h->scan_wait_queue, h->scan_finished);
/* Note: We don't need to worry about a race between this
@@ -5590,6 +5599,7 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
*/
}
h->scan_finished = 0; /* mark scan as in progress */
+ h->scan_waiting = 0;
spin_unlock_irqrestore(&h->scan_lock, flags);
if (unlikely(lockup_detected(h)))
@@ -8792,6 +8802,7 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
init_waitqueue_head(&h->event_sync_wait_queue);
mutex_init(&h->reset_mutex);
h->scan_finished = 1; /* no scan currently in progress */
+ h->scan_waiting = 0;
pci_set_drvdata(pdev, h);
h->ndevices = 0;
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index bf6cdc1..6f04f2a 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -201,6 +201,7 @@ struct ctlr_info {
dma_addr_t errinfo_pool_dhandle;
unsigned long *cmd_pool_bits;
int scan_finished;
+ u8 scan_waiting : 1;
spinlock_t scan_lock;
wait_queue_head_t scan_wait_queue;
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index a584cdf..5961705 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -156,6 +156,7 @@
#define CFGTBL_BusType_Fibre2G 0x00000200l
/* VPD Inquiry types */
+#define HPSA_INQUIRY_FAILED 0x02
#define HPSA_VPD_SUPPORTED_PAGES 0x00
#define HPSA_VPD_LV_DEVICE_ID 0x83
#define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1
@@ -166,6 +167,7 @@
/* Logical volume states */
#define HPSA_VPD_LV_STATUS_UNSUPPORTED 0xff
#define HPSA_LV_OK 0x0
+#define HPSA_LV_FAILED 0x01
#define HPSA_LV_NOT_AVAILABLE 0x0b
#define HPSA_LV_UNDERGOING_ERASE 0x0F
#define HPSA_LV_UNDERGOING_RPI 0x12
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 5c3be3e..22819af 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3315,9 +3315,9 @@ LPFC_ATTR_R(nvmet_mrq_post, LPFC_DEF_MRQ_POST,
* lpfc_enable_fc4_type: Defines what FC4 types are supported.
* Supported Values: 1 - register just FCP
* 3 - register both FCP and NVME
- * Supported values are [1,3]. Default value is 3
+ * Supported values are [1,3]. Default value is 1
*/
-LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH,
+LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_FCP,
LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
"Define fc4 type to register with fabric.");
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 2697d49..6cc561b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5891,10 +5891,17 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
/* Check to see if it matches any module parameter */
for (i = 0; i < lpfc_enable_nvmet_cnt; i++) {
if (wwn == lpfc_enable_nvmet[i]) {
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"6017 NVME Target %016llx\n",
wwn);
phba->nvmet_support = 1; /* a match */
+#else
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6021 Can't enable NVME Target."
+ " NVME_TARGET_FC infrastructure"
+ " is not in kernel\n");
+#endif
}
}
}
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 0a4c190..0024de1 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -2149,7 +2149,7 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport)
/* localport is allocated from the stack, but the registration
* call allocates heap memory as well as the private area.
*/
-#ifdef CONFIG_LPFC_NVME_INITIATOR
+#if (IS_ENABLED(CONFIG_NVME_FC))
ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template,
&vport->phba->pcidev->dev, &localport);
#else
@@ -2190,7 +2190,7 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport)
void
lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
{
-#ifdef CONFIG_LPFC_NVME_INITIATOR
+#if (IS_ENABLED(CONFIG_NVME_FC))
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_rport *rport = NULL, *rport_next = NULL;
@@ -2274,7 +2274,7 @@ lpfc_nvme_update_localport(struct lpfc_vport *vport)
int
lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
-#ifdef CONFIG_LPFC_NVME_INITIATOR
+#if (IS_ENABLED(CONFIG_NVME_FC))
int ret = 0;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
@@ -2403,7 +2403,7 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
void
lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
-#ifdef CONFIG_LPFC_NVME_INITIATOR
+#if (IS_ENABLED(CONFIG_NVME_FC))
int ret;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index b7739a5..7ca868f 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -671,7 +671,7 @@ lpfc_nvmet_create_targetport(struct lpfc_hba *phba)
lpfc_tgttemplate.target_features = NVMET_FCTGTFEAT_READDATA_RSP |
NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED;
-#ifdef CONFIG_LPFC_NVME_TARGET
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
error = nvmet_fc_register_targetport(&pinfo, &lpfc_tgttemplate,
&phba->pcidev->dev,
&phba->targetport);
@@ -756,7 +756,7 @@ lpfc_sli4_nvmet_xri_aborted(struct lpfc_hba *phba,
void
lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba)
{
-#ifdef CONFIG_LPFC_NVME_TARGET
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_tgtport *tgtp;
if (phba->nvmet_support == 0)
@@ -788,7 +788,7 @@ static void
lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct hbq_dmabuf *nvmebuf)
{
-#ifdef CONFIG_LPFC_NVME_TARGET
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_tgtport *tgtp;
struct fc_frame_header *fc_hdr;
struct lpfc_nvmet_rcv_ctx *ctxp;
@@ -891,7 +891,7 @@ lpfc_nvmet_unsol_fcp_buffer(struct lpfc_hba *phba,
struct rqb_dmabuf *nvmebuf,
uint64_t isr_timestamp)
{
-#ifdef CONFIG_LPFC_NVME_TARGET
+#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
struct lpfc_nvmet_rcv_ctx *ctxp;
struct lpfc_nvmet_tgtport *tgtp;
struct fc_frame_header *fc_hdr;
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index e7e5974..2b209bb 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -35,8 +35,8 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "07.701.16.00-rc1"
-#define MEGASAS_RELDATE "February 2, 2017"
+#define MEGASAS_VERSION "07.701.17.00-rc1"
+#define MEGASAS_RELDATE "March 2, 2017"
/*
* Device IDs
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 7ac9a9e..0016f12 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1963,6 +1963,9 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
if (!mr_device_priv_data)
return -ENOMEM;
sdev->hostdata = mr_device_priv_data;
+
+ atomic_set(&mr_device_priv_data->r1_ldio_hint,
+ instance->r1_ldio_hint_default);
return 0;
}
@@ -5034,10 +5037,12 @@ megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe)
&instance->irq_context[j]);
/* Retry irq register for IO_APIC*/
instance->msix_vectors = 0;
- if (is_probe)
+ if (is_probe) {
+ pci_free_irq_vectors(instance->pdev);
return megasas_setup_irqs_ioapic(instance);
- else
+ } else {
return -1;
+ }
}
}
return 0;
@@ -5277,9 +5282,11 @@ static int megasas_init_fw(struct megasas_instance *instance)
MPI2_REPLY_POST_HOST_INDEX_OFFSET);
}
- i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY);
- if (i < 0)
- goto fail_setup_irqs;
+ if (!instance->msix_vectors) {
+ i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY);
+ if (i < 0)
+ goto fail_setup_irqs;
+ }
dev_info(&instance->pdev->dev,
"firmware supports msix\t: (%d)", fw_msix_count);
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 29650ba..f990ab4d 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -2159,7 +2159,7 @@ megasas_set_raidflag_cpu_affinity(union RAID_CONTEXT_UNION *praid_context,
cpu_sel = MR_RAID_CTX_CPUSEL_1;
if (is_stream_detected(rctx_g35) &&
- (raid->level == 5) &&
+ ((raid->level == 5) || (raid->level == 6)) &&
(raid->writeMode == MR_RL_WRITE_THROUGH_MODE) &&
(cpu_sel == MR_RAID_CTX_CPUSEL_FCFS))
cpu_sel = MR_RAID_CTX_CPUSEL_0;
@@ -2338,7 +2338,7 @@ megasas_build_ldio_fusion(struct megasas_instance *instance,
fp_possible = false;
atomic_dec(&instance->fw_outstanding);
} else if ((scsi_buff_len > MR_LARGE_IO_MIN_SIZE) ||
- atomic_dec_if_positive(&mrdev_priv->r1_ldio_hint)) {
+ (atomic_dec_if_positive(&mrdev_priv->r1_ldio_hint) > 0)) {
fp_possible = false;
atomic_dec(&instance->fw_outstanding);
if (scsi_buff_len > MR_LARGE_IO_MIN_SIZE)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 1359913..e8c26e6 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7642,7 +7642,7 @@ static inline ssize_t ufshcd_pm_lvl_store(struct device *dev,
if (kstrtoul(buf, 0, &value))
return -EINVAL;
- if ((value < UFS_PM_LVL_0) || (value >= UFS_PM_LVL_MAX))
+ if (value >= UFS_PM_LVL_MAX)
return -EINVAL;
spin_lock_irqsave(hba->host->host_lock, flags);
