Add definitions for some SAS error codes that can be
logged by ipr SAS adapters.
Signed-off-by: Brian King <brking@xxxxxxxxxx>
---
libata-dev-bjking1/drivers/scsi/ipr.c | 26 ++++++++++++++++++++++++++
1 files changed, 26 insertions(+)
diff -puN drivers/scsi/ipr.c~ipr_sas_errors drivers/scsi/ipr.c
--- libata-dev/drivers/scsi/ipr.c~ipr_sas_errors 2006-06-27 14:49:10.000000000 -0500
+++ libata-dev-bjking1/drivers/scsi/ipr.c 2006-06-27 14:49:10.000000000 -0500
@@ -176,6 +176,8 @@ struct ipr_error_table_t ipr_error_table
"Qualified success"},
{0x01080000, 1, 1,
"FFFE: Soft device bus error recovered by the IOA"},
+ {0x01088100, 0, 1,
+ "4101: Soft device bus fabric error"},
{0x01170600, 0, 1,
"FFF9: Device sector reassign successful"},
{0x01170900, 0, 1,
@@ -226,6 +228,8 @@ struct ipr_error_table_t ipr_error_table
"3109: IOA timed out a device command"},
{0x04088000, 0, 0,
"3120: SCSI bus is not operational"},
+ {0x04088100, 0, 1,
+ "4100: Hard device bus fabric error"},
{0x04118000, 0, 1,
"9000: IOA reserved area data check"},
{0x04118100, 0, 1,
@@ -274,6 +278,14 @@ struct ipr_error_table_t ipr_error_table
"9091: Incorrect hardware configuration change has been detected"},
{0x04678000, 0, 1,
"9073: Invalid multi-adapter configuration"},
+ {0x04678100, 0, 1,
+ "4010: Incorrect connection between cascaded expanders"},
+ {0x04678200, 0, 1,
+ "4020: Connections exceed IOA design limits"},
+ {0x04678300, 0, 1,
+ "4030: Incorrect multipath connection"},
+ {0x04679000, 0, 1,
+ "4110: Unsupported enclosure function"},
{0x046E0000, 0, 1,
"FFF4: Command to logical unit failed"},
{0x05240000, 1, 0,
@@ -320,6 +332,16 @@ struct ipr_error_table_t ipr_error_table
"3150: SCSI bus configuration error"},
{0x06678100, 0, 1,
"9074: Asymmetric advanced function disk configuration"},
+ {0x06678300, 0, 1,
+ "4040: Incomplete multipath connection between IOA and enclosure"},
+ {0x06678400, 0, 1,
+ "4041: Incomplete multipath connection between enclosure and device"},
+ {0x06678500, 0, 1,
+ "Incomplete multipath connection between IOA and remote IOA"},
+ {0x06678600, 0, 1,
+ "9076: Configuration error, missing remote IOA"},
+ {0x06679100, 0, 1,
+ "4050: Enclosure does not support a required multipath function"},
{0x06690200, 0, 1,
"9041: Array protection temporarily suspended"},
{0x06698200, 0, 1,
@@ -332,6 +354,10 @@ struct ipr_error_table_t ipr_error_table
"9072: Link not operational transition"},
{0x066B8200, 0, 1,
"9032: Array exposed but still protected"},
+ {0x066B9100, 0, 1,
+ "4061: Multipath redundancy level got better"},
+ {0x066B9200, 0, 1,
+ "4060: Multipath redundancy level got worse"},
{0x07270000, 0, 0,
"Failure due to other device"},
{0x07278000, 0, 1,
_
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
