problem with block: Move bdi_unregister() to del_gendisk() commit 165a5e22fafb127ecb5914e12e8c32a1f0d3f820

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On one of my pc's I have 2 PATA disks (one, WDC below is used for booting, the other SAMSUNG is not mounted), plus an IBM SCSI disk using a DPT 2044W controller with eata driver and sometimes a Verbatim Storengo USB stick.

On recent 4.10.0+ kernel builds (i386), the resulting kernel would pause during the start-up when the USB stick was inserted but boot normally otherwise.

A git-bisect lead to:

commit 165a5e22fafb127ecb5914e12e8c32a1f0d3f820
Author: Jan Kara <jack@xxxxxxx>
Date:   Wed Feb 8 08:05:56 2017 +0100

    block: Move bdi_unregister() to del_gendisk()

    Commit 6cd18e711dd8 "block: destroy bdi before blockdev is
    unregistered." moved bdi unregistration (at that time through
    bdi_destroy()) from blk_release_queue() to blk_cleanup_queue() because
    it needs to happen before blk_unregister_region() call in del_gendisk()
    for MD. SCSI though will free up the device number from sd_remove()
    called through a maze of callbacks from device_del() in
__scsi_remove_device() before blk_cleanup_queue() and thus similar races
    as described in 6cd18e711dd8 can happen for SCSI as well as reported by
    Omar [1].

    Moving bdi_unregister() to del_gendisk() works for MD and fixes the
problem for SCSI since del_gendisk() gets called from sd_remove() before
    freeing the device number.

    This also makes device_add_disk() (calling bdi_register_owner()) more
    symmetric with del_gendisk().

    [1] http://marc.info/?l=linux-block&m=148554717109098&w=2

When booting the bad kernel, I would eventually get a prompt to press the enter key to boot and it eventually started, but the SCSI disk partitions were not found by blkid nor could they be mounted.

lsscsi reports:

[0:0:6:0]    disk    IBM      DCAS-34330W      S65A  /dev/sda
[1:0:0:0]    disk    ATA      WDC WD3200AAJB-0 2C01  /dev/sdc
[2:0:0:0]    cd/dvd  HL-DT-ST DVDRAM GSA-4163B A103  /dev/sr0
[2:0:1:0]    disk    ATA      SAMSUNG SP4002H  0-57  /dev/sdd
[3:0:0:0]    disk    Verbatim STORE N GO       5.00  /dev/sdb

blkid reports:

/dev/sdb1: LABEL="STORENGO" UUID="B08B-79DA" TYPE="vfat" PARTUUID="961d9655-01" /dev/sdc1: UUID="bfdeb6d6-0b77-4beb-a63d-bdc3e455b8ea" TYPE="ext3" PTTYPE="dos" PARTUUID="000750bf-01" /dev/sdc5: UUID="26b7280a-f40c-49dd-a086-dbbb9b7e3def" TYPE="swap" PARTUUID="000750bf-05"
/dev/sdc6: UUID="7417-5AFF" TYPE="vfat" PARTUUID="000750bf-06"
/dev/sdc7: UUID="96c96a61-8615-4715-86d0-09cb8c62638c" TYPE="ext3" PARTUUID="000750bf-07" /dev/sdd1: LABEL="W-98 SE" UUID="3571-16DE" TYPE="vfat" PARTUUID="43598af3-01" /dev/sdd3: UUID="fd6a052e-c062-4c47-801d-087595635c5d" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="43598af3-03" /dev/sdd5: UUID="026a3f5c-0064-4ae7-869e-519d2cee05e7" SEC_TYPE="ext2" TYPE="ext3" PTTYPE="dos" PARTUUID="43598af3-05" /dev/sdd6: UUID="9a0970fa-74ba-4426-98ac-1e8b81933e0e" TYPE="swap" PARTUUID="43598af3-06"
/dev/sdd7: UUID="4912-06CA" TYPE="vfat" PARTUUID="43598af3-07"

The boot screen is at:

http://www.users.on.net/~arthur.marsh/20170308_185555.jpg

and the dmesg output from booting the bad kernel is attached.

I'm happy to supply any other configuration details needed and run further tests.

Regards,

Arthur.



[    0.000000] Linux version 4.10.0+ (root@victoria) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #652 SMP PREEMPT Wed Mar 8 04:45:06 ACDT 2017
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ffbe000-0x000000003ffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003ffe0000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System manufacturer System Product Name/A8V-MX, BIOS 0503    12/06/2005
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ffb0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 00D0000000 mask FFF0000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x025fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x02115000, 0x02115fff] PGTABLE
[    0.000000] BRK [0x02116000, 0x02116fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36f9d000-0x377c5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAC60 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I  OEMXSDT  12000506 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I  OEMFACP  12000506 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000003FFB03F0 0046F0 (v01 A0347  A0347001 00000001 INTL 02002026)
[    0.000000] ACPI: FACS 0x000000003FFBE000 000040
[    0.000000] ACPI: FACS 0x000000003FFBE000 000040
[    0.000000] ACPI: APIC 0x000000003FFB0390 00005C (v01 A M I  OEMAPIC  12000506 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x000000003FFBE040 000046 (v01 A M I  AMI_OEM  12000506 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 131MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000003ffaffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffaffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
[    0.000000] On node 0 totalpages: 261966
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1971 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 33714 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30582079743023 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 21 pages/cpu @f7bd1000 s57192 r0 d28824 u86016
[    0.000000] pcpu-alloc: s57192 r0 d28824 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259959
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.10.0+ root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003ffb0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1011736K/1047864K available (6053K kernel code, 652K rwdata, 2156K rodata, 584K init, 7932K bss, 36128K reserved, 0K cma-reserved, 134856K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc18ab000 - 0xc193d000   ( 584 kB)
                     .data : 0xc15e96a3 - 0xc18a9240   (2814 kB)
                     .text : 0xc1000000 - 0xc15e96a3   (6053 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Running RCU self tests
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f601c000 soft=f601e000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 4911 kB
[    0.000000]  per task-struct memory footprint: 1344 bytes
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |  ok  |
[    0.000000]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.000000]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.000000]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]   | Wound/wait tests |
[    0.000000]   ---------------------
[    0.000000]                   ww api failures:  ok  |  ok  |  ok  |
[    0.000000]                ww contexts mixing:  ok  |  ok  |
[    0.000000]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.000000]                locking mismatches:  ok  |  ok  |  ok  |
[    0.000000]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]            spinlock nest unlocked:  ok  |
[    0.000000]   -----------------------------------------------------
[    0.000000]                                  |block | try  |context|
[    0.000000]   -----------------------------------------------------
[    0.000000]                           context:  ok  |  ok  |  ok  |
[    0.000000]                               try:  ok  |  ok  |  ok  |
[    0.000000]                             block:  ok  |  ok  |  ok  |
[    0.000000]                          spinlock:  ok  |  ok  |  ok  |
[    0.000000] -------------------------------------------------------
[    0.000000] Good, all 253 testcases passed! |
[    0.000000] ---------------------------------
[    0.004000] tsc: Fast TSC calibration using PIT
[    0.008000] tsc: Detected 2000.053 MHz processor
[    0.008000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.10 BogoMIPS (lpj=8000212)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008000] ACPI: Core revision 20170119
[    0.018632] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.018791] Security Framework initialized
[    0.018860] Yama: becoming mindful.
[    0.018941] AppArmor: AppArmor disabled by boot time parameter
[    0.019053] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.019129] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.019833] mce: CPU supports 5 MCE banks
[    0.019917] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.019988] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.026369] smpboot: Max logical packages: 2
[    0.026444] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.026954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.068000] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (family: 0xf, model: 0x2f, stepping: 0x2)
[    0.076017] Performance Events: AMD PMU driver.
[    0.076094] ... version:                0
[    0.076160] ... bit width:              48
[    0.076225] ... generic registers:      4
[    0.076291] ... value mask:             0000ffffffffffff
[    0.076361] ... max period:             00007fffffffffff
[    0.076430] ... fixed-purpose events:   0
[    0.076496] ... event mask:             000000000000000f
[    0.104118] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.112011] smp: Bringing up secondary CPUs ...
[    0.112080] smp: Brought up 1 node, 1 CPU
[    0.112147] smpboot: Total of 1 processors activated (4000.10 BogoMIPS)
[    0.113050] devtmpfs: initialized
[    0.116052] PM: Registering ACPI NVS region [mem 0x3ffbe000-0x3ffdffff] (139264 bytes)
[    0.120090] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.120190] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.120465] pinctrl core: initialized pinctrl subsystem
[    0.121038] NET: Registered protocol family 16
[    0.121754] cpuidle: using governor ladder
[    0.121858] cpuidle: using governor menu
[    0.121928] node 0 link 0: io port [1000, ffffff]
[    0.121933] TOM: 0000000040000000 aka 1024M
[    0.122002] node 0 link 0: mmio [a0000, bffff]
[    0.122008] node 0 link 0: mmio [40000000, ffffffff]
[    0.122014] bus: [bus 00-ff] on node 0 link 0
[    0.122017] bus: 00 [io  0x0000-0xffff]
[    0.122020] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.122023] bus: 00 [mem 0x40000000-0xfcffffffff]
[    0.122070] ACPI: bus type PCI registered
[    0.123684] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.123840] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.123912] PCI: Using configuration type 1 for base access
[    0.128164] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.144124] ACPI: Added _OSI(Module Device)
[    0.144193] ACPI: Added _OSI(Processor Device)
[    0.144261] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.144329] ACPI: Added _OSI(Processor Aggregator Device)
[    0.144675] ACPI: Executed 1 blocks of module-level executable AML code
[    0.154891] ACPI: Interpreter enabled
[    0.155016] ACPI: (supports S0 S1 S4 S5)
[    0.155082] ACPI: Using IOAPIC for interrupt routing
[    0.155229] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.179754] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.179844] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.179948] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.180033] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.180771] PCI host bridge to bus 0000:00
[    0.180840] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.180916] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.180992] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.181080] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.181169] pci_bus 0000:00: root bus resource [mem 0x40000000-0xffffffff window]
[    0.181258] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.181376] pci 0000:00:00.0: [1106:0204] type 00 class 0x060000
[    0.181392] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.181839] pci 0000:00:00.1: [1106:1204] type 00 class 0x060000
[    0.182212] pci 0000:00:00.2: [1106:2204] type 00 class 0x060000
[    0.182571] pci 0000:00:00.3: [1106:3204] type 00 class 0x060000
[    0.182930] pci 0000:00:00.4: [1106:4204] type 00 class 0x060000
[    0.183291] pci 0000:00:00.7: [1106:7204] type 00 class 0x060000
[    0.183652] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[    0.183730] pci 0000:00:01.0: supports D1
[    0.184086] pci 0000:00:0f.0: [1106:0571] type 00 class 0x01018a
[    0.184149] pci 0000:00:0f.0: reg 0x20: [io  0xfc00-0xfc0f]
[    0.184178] pci 0000:00:0f.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.184255] pci 0000:00:0f.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.184330] pci 0000:00:0f.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.184407] pci 0000:00:0f.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.184782] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.184844] pci 0000:00:10.0: reg 0x20: [io  0xec00-0xec1f]
[    0.184912] pci 0000:00:10.0: supports D1 D2
[    0.184916] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185148] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.185339] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.185401] pci 0000:00:10.1: reg 0x20: [io  0xe880-0xe89f]
[    0.185469] pci 0000:00:10.1: supports D1 D2
[    0.185472] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185687] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.185878] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.185940] pci 0000:00:10.2: reg 0x20: [io  0xe800-0xe81f]
[    0.186008] pci 0000:00:10.2: supports D1 D2
[    0.186011] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186226] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.186416] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.186478] pci 0000:00:10.3: reg 0x20: [io  0xe480-0xe49f]
[    0.186545] pci 0000:00:10.3: supports D1 D2
[    0.186549] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186764] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.186958] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.186982] pci 0000:00:10.4: reg 0x10: [mem 0xff6ffc00-0xff6ffcff]
[    0.187098] pci 0000:00:10.4: supports D1 D2
[    0.187101] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.187319] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.187516] pci 0000:00:11.0: [1106:3287] type 00 class 0x060100
[    0.187947] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.187970] pci 0000:00:11.5: reg 0x10: [io  0xe000-0xe0ff]
[    0.188092] pci 0000:00:11.5: supports D1 D2
[    0.188391] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[    0.188763] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.188785] pci 0000:00:12.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.188800] pci 0000:00:12.0: reg 0x14: [mem 0xff6ff800-0xff6ff8ff]
[    0.188899] pci 0000:00:12.0: supports D1 D2
[    0.188902] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189117] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.189305] pci 0000:00:13.0: [1106:287b] type 01 class 0x060400
[    0.189640] pci 0000:00:13.1: [1106:287a] type 01 class 0x060400
[    0.189900] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.190107] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.190429] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.190738] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.191045] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.191458] pci 0000:01:00.0: [1002:4153] type 00 class 0x030000
[    0.191478] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[    0.191490] pci 0000:01:00.0: reg 0x14: [io  0xb000-0xb0ff]
[    0.191502] pci 0000:01:00.0: reg 0x18: [mem 0xff4f0000-0xff4fffff]
[    0.191537] pci 0000:01:00.0: reg 0x30: [mem 0xff4c0000-0xff4dffff pref]
[    0.191591] pci 0000:01:00.0: supports D1 D2
[    0.191712] pci 0000:01:00.1: [1002:4173] type 00 class 0x038000
[    0.191730] pci 0000:01:00.1: reg 0x10: [mem 0x90000000-0x9fffffff pref]
[    0.191742] pci 0000:01:00.1: reg 0x14: [mem 0xff4e0000-0xff4effff]
[    0.191829] pci 0000:01:00.1: supports D1 D2
[    0.191985] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.192011] pci 0000:00:01.0:   bridge window [io  0x9000-0xbfff]
[    0.192017] pci 0000:00:01.0:   bridge window [mem 0xff400000-0xff4fffff]
[    0.192023] pci 0000:00:01.0:   bridge window [mem 0x7ff00000-0xbfefffff pref]
[    0.192149] pci 0000:02:00.0: [1106:287c] type 01 class 0x060400
[    0.192241] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.192311] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.192506] pci 0000:02:00.1: [1106:287d] type 01 class 0x060400
[    0.192597] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.192766] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.192922] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[    0.193094] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.193265] pci 0000:02:00.1: PCI bridge to [bus 04]
[    0.193465] pci 0000:05:0c.0: [1044:a400] type 00 class 0x010000
[    0.193485] pci 0000:05:0c.0: reg 0x10: [io  0xcc00-0xcc1f]
[    0.193551] pci 0000:05:0c.0: reg 0x30: [mem 0xff5f0000-0xff5f7fff pref]
[    0.193709] pci 0000:00:13.1: PCI bridge to [bus 05]
[    0.193782] pci 0000:00:13.1:   bridge window [io  0xc000-0xcfff]
[    0.193788] pci 0000:00:13.1:   bridge window [mem 0xff500000-0xff5fffff]
[    0.193813] pci_bus 0000:00: on NUMA node 0
[    0.196180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.196468] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.196740] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.197011] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.197287] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.197577] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.197871] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.198164] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.198878] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.198957] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.199052] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.199123] vgaarb: loaded
[    0.200040] PCI: Using ACPI for IRQ routing
[    0.200111] PCI: pci_cache_line_size set to 64 bytes
[    0.200217] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.200224] e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
[    0.204184] clocksource: Switched to clocksource refined-jiffies
[    0.205718] VFS: Disk quotas dquot_6.6.0
[    0.205827] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.206240] pnp: PnP ACPI init
[    0.206542] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.207823] pnp 00:01: [dma 3]
[    0.207823] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.207823] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.207823] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207823] system 00:03: [io  0x03e0-0x03e7] has been reserved
[    0.207823] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.207823] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.207823] system 00:03: [io  0x0400-0x041f] has been reserved
[    0.207823] system 00:03: [mem 0xff780000-0xffffffff] has been reserved
[    0.207823] system 00:03: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.207823] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207823] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.207823] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.207823] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207823] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.207823] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.207823] pnp 00:07: [dma 0 disabled]
[    0.207823] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.207823] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.207823] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207905] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.207983] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.208060] system 00:09: [mem 0x00100000-0x3fffffff] could not be reserved
[    0.208060] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.208060] pnp: PnP ACPI: found 10 devices
[    0.208113] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.208113] clocksource: Switched to clocksource acpi_pm
[    0.208113] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.208113] pci 0000:00:01.0:   bridge window [io  0x9000-0xbfff]
[    0.208113] pci 0000:00:01.0:   bridge window [mem 0xff400000-0xff4fffff]
[    0.208113] pci 0000:00:01.0:   bridge window [mem 0x7ff00000-0xbfefffff pref]
[    0.208113] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.208113] pci 0000:02:00.1: PCI bridge to [bus 04]
[    0.208113] pci 0000:00:13.0: PCI bridge to [bus 02-04]
[    0.208113] pci 0000:00:13.1: PCI bridge to [bus 05]
[    0.208113] pci 0000:00:13.1:   bridge window [io  0xc000-0xcfff]
[    0.208113] pci 0000:00:13.1:   bridge window [mem 0xff500000-0xff5fffff]
[    0.208113] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.208113] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.208113] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.208113] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.208113] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffffffff window]
[    0.208113] pci_bus 0000:01: resource 0 [io  0x9000-0xbfff]
[    0.208113] pci_bus 0000:01: resource 1 [mem 0xff400000-0xff4fffff]
[    0.208113] pci_bus 0000:01: resource 2 [mem 0x7ff00000-0xbfefffff pref]
[    0.208113] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.208113] pci_bus 0000:05: resource 1 [mem 0xff500000-0xff5fffff]
[    0.208113] NET: Registered protocol family 2
[    0.208280] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.208280] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[    0.208280] TCP: Hash tables configured (established 8192 bind 8192)
[    0.208280] UDP hash table entries: 512 (order: 3, 40960 bytes)
[    0.208315] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[    0.208661] NET: Registered protocol family 1
[    0.208748] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.208845] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.210956] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.210956] PCI: CLS 64 bytes, default 64
[    0.210956] Unpacking initramfs...
[    0.493085] Freeing initrd memory: 8356K
[    0.493290] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd4603885c, max_idle_ns: 440795251062 ns
[    0.494245] audit: initializing netlink subsys (disabled)
[    0.495028] audit: type=2000 audit(1488960908.488:1): state=initialized audit_enabled=0 res=1
[    0.499328] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.505605] bounce: pool size: 64 pages
[    0.505695] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.509925] io scheduler noop registered
[    0.509991] io scheduler deadline registered
[    0.510087] io scheduler cfq registered (default)
[    0.510156] io scheduler mq-deadline registered
[    0.511145] GHES: HEST is not enabled!
[    0.511408] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.532086] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.533348] Linux agpgart interface v0.103
[    0.533444] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[    0.540620] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.541222] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.541878] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.542139] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.542600] mousedev: PS/2 mouse device common for all mice
[    0.542886] rtc_cmos 00:00: RTC can wake from S4
[    0.543285] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.543396] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
[    0.543758] NET: Registered protocol family 10
[    0.548553] Segment Routing with IPv6
[    0.548645] mip6: Mobile IPv6
[    0.548723] NET: Registered protocol family 17
[    0.548795] mpls_gso: MPLS GSO support
[    0.549181] microcode: AMD CPU family 0xf not supported
[    0.549255] Using IPI No-Shortcut mode
[    0.549767] registered taskstats version 1
[    0.554773] rtc_cmos 00:00: setting system clock to 2017-03-08 08:15:09 UTC (1488960909)
[    0.554978] PM: Hibernation image not present or could not be loaded.
[    0.555763] Freeing unused kernel memory: 584K
[    0.556129] Write protecting the kernel text: 6056k
[    0.556216] Write protecting the kernel read-only data: 2160k
[    0.556288] NX-protecting the kernel data: 4184k
[    0.565308] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.730947] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.733618] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.733988] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.734094] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.735754] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.738531] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.738895] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.740565] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.740898] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.741213] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.877948] SCSI subsystem initialized
[    0.894416] ACPI: bus type USB registered
[    0.894638] usbcore: registered new interface driver usbfs
[    0.894760] usbcore: registered new interface driver hub
[    0.901074] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    0.902139] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1d800, 00:13:d4:cc:9b:57, IRQ 23
[    0.903001] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[    0.904654] EATA0: IRQ 10 mapped to IO-APIC IRQ 17.
[    0.904874] usbcore: registered new device driver usb
[    0.905983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.906600] uhci_hcd: USB Universal Host Controller Interface driver
[    0.908186] ehci-pci: EHCI PCI platform driver
[    0.909297] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.909463] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    0.909582] uhci_hcd 0000:00:10.0: detected 2 ports
[    0.909707] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000ec00
[    0.911006] EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.
[    0.911084] EATA config options -> tm:1, lc:y, mq:16, rs:y, et:n, ip:n, ep:n, pp:y.
[    0.911172] EATA0: 2.0C, PCI 0xcc10, IRQ 17, BMST, SG 122, MB 64.
[    0.911244] EATA0: wide SCSI support enabled, max_id 16, max_lun 8.
[    0.911317] EATA0: SCSI channel 0 enabled, host target ID 7.
[    0.911396] scsi host0: EATA/DMA 2.0x rev. 8.10.00 
[    0.913517] libata version 3.00 loaded.
[    0.914284] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.914374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.914462] usb usb1: Product: UHCI Host Controller
[    0.914532] usb usb1: Manufacturer: Linux 4.10.0+ uhci_hcd
[    0.914603] usb usb1: SerialNumber: 0000:00:10.0
[    0.918818] hub 1-0:1.0: USB hub found
[    0.920567] hub 1-0:1.0: 2 ports detected
[    0.928835] ehci-pci 0000:00:10.4: EHCI Host Controller
[    0.928940] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[    0.929051] ehci-pci 0000:00:10.4: debug port 1
[    0.929212] ehci-pci 0000:00:10.4: irq 22, io mem 0xff6ffc00
[    0.944067] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.944440] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.944522] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.944610] usb usb2: Product: EHCI Host Controller
[    0.944680] usb usb2: Manufacturer: Linux 4.10.0+ ehci_hcd
[    0.944752] usb usb2: SerialNumber: 0000:00:10.4
[    0.945460] hub 2-0:1.0: USB hub found
[    0.945594] hub 2-0:1.0: 8 ports detected
[    0.972361] hub 1-0:1.0: USB hub found
[    0.972516] hub 1-0:1.0: 2 ports detected
[    0.973309] pata_via 0000:00:0f.0: version 0.3.4
[    0.980527] scsi host1: pata_via
[    0.986970] scsi host2: pata_via
[    0.987231] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.987308] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.988316] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.988402] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.988500] uhci_hcd 0000:00:10.1: detected 2 ports
[    0.988593] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e880
[    0.988873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.988950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.989038] usb usb3: Product: UHCI Host Controller
[    0.989108] usb usb3: Manufacturer: Linux 4.10.0+ uhci_hcd
[    0.989180] usb usb3: SerialNumber: 0000:00:10.1
[    0.989704] hub 3-0:1.0: USB hub found
[    0.989799] hub 3-0:1.0: 2 ports detected
[    0.990603] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.990683] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.990779] uhci_hcd 0000:00:10.2: detected 2 ports
[    0.990885] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[    0.991141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.991219] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.991307] usb usb4: Product: UHCI Host Controller
[    0.991377] usb usb4: Manufacturer: Linux 4.10.0+ uhci_hcd
[    0.991448] usb usb4: SerialNumber: 0000:00:10.2
[    0.994413] hub 4-0:1.0: USB hub found
[    0.996095] hub 4-0:1.0: 2 ports detected
[    0.999410] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.999499] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.999597] uhci_hcd 0000:00:10.3: detected 2 ports
[    0.999708] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000e480
[    1.002450] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.002531] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.002618] usb usb5: Product: UHCI Host Controller
[    1.002688] usb usb5: Manufacturer: Linux 4.10.0+ uhci_hcd
[    1.002759] usb usb5: SerialNumber: 0000:00:10.3
[    1.006177] hub 5-0:1.0: USB hub found
[    1.006284] hub 5-0:1.0: 2 ports detected
[    1.163570] ata1.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[    1.163661] ata1.00: 625142448 sectors, multi 16: LBA48 
[    1.166475] ata1.00: configured for UDMA/100
[    1.272067] usb 2-5: new high-speed USB device number 2 using ehci-pci
[    1.430262] usb 2-5: New USB device found, idVendor=13fe, idProduct=1e23
[    1.430348] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.430425] usb 2-5: Product: STORE N GO
[    1.430493] usb 2-5: Manufacturer: Verbatim
[    1.430561] usb 2-5: SerialNumber: 078A18B40293
[    1.440905] usb-storage 2-5:1.0: USB Mass Storage device detected
[    1.445284] scsi host3: usb-storage 2-5:1.0
[    1.446277] usbcore: registered new interface driver usb-storage
[    1.452668] usbcore: registered new interface driver uas
[    1.967295] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    2.474346] scsi 3:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[    2.482188] scsi 0:0:6:0: Direct-Access     IBM      DCAS-34330W      S65A PQ: 0 ANSI: 2
[    2.482280] scsi 0:0:6:0: cmds/lun 16, sorted, simple tags.
[    2.494928] random: fast init done
[    4.068313] floppy0: no floppy controllers found
[    4.068402] work still pending
[    4.557081] sd 3:0:0:0: [sdb] 3911680 512-byte logical blocks: (2.00 GB/1.87 GiB)
[    4.557477] sd 0:0:6:0: [sda] 8466688 512-byte logical blocks: (4.33 GB/4.04 GiB)
[    4.557819] sd 3:0:0:0: [sdb] Write Protect is off
[    4.557888] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    4.558579] sd 3:0:0:0: [sdb] No Caching mode page found
[    4.558653] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[    4.562503] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5
[    4.567628]  sdb: sdb1
[    4.571083] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[    4.581040] sd 1:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    4.581177] sd 1:0:0:0: [sdc] Write Protect is off
[    4.581248] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.581329] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.590459] sd 0:0:6:0: [sda] Write Protect is off
[    4.590547] sd 0:0:6:0: [sda] Mode Sense: b3 00 00 08
[    4.611330] sd 0:0:6:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.614530] BUG: unable to handle kernel NULL pointer dereference at 00000258
[    4.614606] IP: sd_revalidate_disk+0x12/0x1460 [sd_mod]
[    4.614668] *pdpt = 00000000370de001 *pde = 0000000000000000 

[    4.614788] Oops: 0000 [#1] PREEMPT SMP
[    4.614847] Modules linked in: uas sd_mod usb_storage psmouse pata_via ehci_pci uhci_hcd ehci_hcd via_rhine usbcore eata mii i2c_viapro usb_common libata scsi_mod
[    4.614970] CPU: 0 PID: 127 Comm: kworker/u4:5 Not tainted 4.10.0+ #652
[    4.615035] Hardware name: System manufacturer System Product Name/A8V-MX, BIOS 0503    12/06/2005
[    4.615117] Workqueue: events_unbound async_run_entry_fn
[    4.615180] task: f71b9080 task.stack: f729c000
[    4.615243] EIP: sd_revalidate_disk+0x12/0x1460 [sd_mod]
[    4.615305] EFLAGS: 00010296 CPU: 0
[    4.615363] EAX: f7261000 EBX: 00000000 ECX: 00000000 EDX: f7196000
[    4.615426] ESI: f7196000 EDI: f7261000 EBP: f729deac ESP: f729de44
[    4.615489]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    4.615552] CR0: 80050033 CR2: 00000258 CR3: 370ce6c0 CR4: 000006f0
[    4.615615] Call Trace:
[    4.615675]  ? kobject_uevent+0xa/0x10
[    4.615736]  ? blk_integrity_add+0x41/0x50
[    4.615797]  ? device_add_disk+0x275/0x450
[    4.615861]  sd_probe_async+0x103/0x1b0 [sd_mod]
[    4.615923]  ? preempt_count_sub+0x26/0x70
[    4.615984]  async_run_entry_fn+0x30/0x170
[    4.616045]  ? preempt_count_sub+0x26/0x70
[    4.616107]  process_one_work+0x235/0x670
[    4.616167]  ? process_one_work+0x1a3/0x670
[    4.616229]  worker_thread+0x2f/0x4c0
[    4.616288]  ? preempt_count_add+0x82/0xc0
[    4.616349]  ? process_one_work+0x670/0x670
[    4.616410]  kthread+0xd0/0x100
[    4.616467]  ? process_one_work+0x670/0x670
[    4.616528]  ? kthread_create_on_node+0x30/0x30
[    4.616591]  ret_from_fork+0x21/0x2c
[    4.616652] Code: 43 02 31 c0 8b 5d f4 c9 c3 8d 75 e4 89 34 24 e8 95 0a fb ff eb d4 8d 76 00 55 89 e5 57 56 53 83 ec 5c 8b 98 0c 03 00 00 89 45 c8 <8b> 93 58 02 00 00 8b 43 04 89 45 d8 8b 82 08 03 00 00 89 45 d0
[    4.616840] EIP: sd_revalidate_disk+0x12/0x1460 [sd_mod] SS:ESP: 0068:f729de44
[    4.616914] CR2: 0000000000000258
[    4.616973] ---[ end trace b1bff84fe33f3677 ]---
[    4.629008]  sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 >
[    4.629967] sd 1:0:0:0: [sdc] Attached SCSI disk
[    4.764354] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[    4.764718] ata2.01: HPA detected: current 66055248, native 78242976
[    4.764782] ata2.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[    4.764846] ata2.01: 66055248 sectors, multi 16: LBA 
[    4.764912] ata2.01: limited to UDMA/33 due to 40-wire cable
[    4.788219] ata2.00: configured for UDMA/33
[    4.793151] ata2.01: configured for UDMA/33
[    4.813358] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[    4.830589] scsi 2:0:1:0: Direct-Access     ATA      SAMSUNG SP4002H  0-57 PQ: 0 ANSI: 5
[    4.852690] sd 2:0:1:0: [sdd] 66055248 512-byte logical blocks: (33.8 GB/31.5 GiB)
[    4.852791] sd 2:0:1:0: [sdd] Write Protect is off
[    4.852853] sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    4.852956] sd 2:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.884776]  sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 > sdd3
[    4.884999] sdd: p3 size 13333950 extends beyond EOD, enabling native capacity
[    4.885118] ata2: soft resetting link
[    5.049657] ata2.01: n_sectors mismatch 66055248 != 78242976
[    5.049719] ata2.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[    5.092214] ata2.00: configured for UDMA/33
[    5.097111] ata2.01: configured for UDMA/33
[    5.099313] ata2: EH complete
[    5.109935] sd 2:0:1:0: [sdd] 78242976 512-byte logical blocks: (40.1 GB/37.3 GiB)
[    5.110103] sdd: detected capacity change from 33820286976 to 40060403712
[    5.160249]  sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 > sdd3
[    5.174036] sd 2:0:1:0: [sdd] Attached SCSI disk
[    5.196260] sdd: detected capacity change from 0 to 40060403712
[  687.847544] random: crng init done
[  689.010603] EXT4-fs (sdc7): mounting ext3 file system using the ext4 subsystem
[  689.050499] EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
[  724.075034] parport_pc 00:01: reported by Plug and Play ACPI
[  724.075219] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[  724.361403] sd 0:0:6:0: Attached scsi generic sg0 type 0
[  724.361543] sd 3:0:0:0: Attached scsi generic sg1 type 0
[  724.361674] sd 1:0:0:0: Attached scsi generic sg2 type 0
[  724.361804] scsi 2:0:0:0: Attached scsi generic sg3 type 5
[  724.361934] sd 2:0:1:0: Attached scsi generic sg4 type 0
[  724.415804] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[  724.420851] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[  724.420934] ACPI: Sleep Button [SLPB]
[  724.421279] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[  724.421355] ACPI: Power Button [PWRB]
[  724.421511] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[  724.421585] ACPI: Power Button [PWRF]
[  724.596126] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[  724.596210] cdrom: Uniform CD-ROM driver Revision: 3.20
[  724.596667] sr 2:0:0:0: Attached scsi CD-ROM sr0
[  726.183709] [drm] radeon kernel modesetting enabled.
[  726.187165] [drm] initializing kernel modesetting (RV350 0x1002:0x4153 0x1458:0x4050 0x00).
[  726.187266] [drm] register mmio base: 0xFF4F0000
[  726.187326] [drm] register mmio size: 65536
[  726.188472] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[  726.188550] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[  726.188683] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[  726.188766] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[  726.188831] [drm] Generation 2 PCI interface, using max accessible memory
[  726.188898] radeon 0000:01:00.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[  726.188995] [drm] Detected VRAM RAM=256M, BAR=256M
[  726.189056] [drm] RAM width 128bits DDR
[  726.193221] [TTM] Zone  kernel: Available graphics memory: 442910 kiB
[  726.193283] [TTM] Zone highmem: Available graphics memory: 510338 kiB
[  726.193347] [TTM] Initializing pool allocator
[  726.193415] [TTM] Initializing DMA pool allocator
[  726.193516] [drm] radeon: 256M of VRAM memory ready
[  726.193579] [drm] radeon: 256M of GTT memory ready.
[  726.193681] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[  726.196836] radeon 0000:01:00.0: WB disabled
[  726.196899] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf840d000
[  726.196981] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[  726.198266] [drm] Driver supports precise vblank timestamp query.
[  726.198350] [drm] radeon: irq initialized.
[  726.198417] [drm] Loading R300 Microcode
[  726.512559] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[  726.559193] [drm] radeon: ring at 0x00000000D0001000
[  726.559281] [drm] ring test succeeded in 1 usecs
[  726.559620] [drm] ib test succeeded in 0 usecs
[  726.560282] [drm] Radeon Display Connectors
[  726.560341] [drm] Connector 0:
[  726.560398] [drm]   VGA-1
[  726.560455] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[  726.560517] [drm]   Encoders:
[  726.560573] [drm]     CRT1: INTERNAL_DAC1
[  726.560632] [drm] Connector 1:
[  726.560689] [drm]   DVI-I-1
[  726.560745] [drm]   HPD1
[  726.560801] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[  726.560863] [drm]   Encoders:
[  726.560920] [drm]     CRT2: INTERNAL_DAC2
[  726.560978] [drm]     DFP1: INTERNAL_TMDS1
[  726.561037] [drm] Connector 2:
[  726.561093] [drm]   SVIDEO-1
[  726.561150] [drm]   Encoders:
[  726.561206] [drm]     TV1: INTERNAL_DAC2
[  726.763606] [drm] fb mappable at 0xA0040000
[  726.763670] [drm] vram apper at 0xA0000000
[  726.763729] [drm] size 8294400
[  726.763786] [drm] fb depth is 24
[  726.763843] [drm]    pitch is 7680
[  726.765288] fbcon: radeondrmfb (fb0) is primary device
[  727.019048] Console: switching to colour frame buffer device 240x67
[  727.163903] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[  727.176050] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
[  727.396107] EDAC MC: Ver: 3.0.0
[  727.424049] MCE: In-kernel MCE decoding enabled.
[  727.457484] EDAC amd64: Node 0: DRAM ECC enabled.
[  727.457915] EDAC amd64: K8 revE or earlier detected (node 0).
[  727.458465] EDAC amd64: using x4 syndromes.
[  727.460830] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.3 (INTERRUPT)
[  727.461703] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[  727.462670] EDAC amd64: Error: amd64_edac on 32-bit is unsupported. USE AT YOUR OWN RISK!
[  727.463401] AMD64 EDAC driver v3.5.0
[  727.484080] powernow_k8: fid 0xc (2000 MHz), vid 0x6
[  727.484532] powernow_k8: fid 0xa (1800 MHz), vid 0x8
[  727.484974] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[  727.485586] powernow_k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00)
[  727.564598] input: PC Speaker as /devices/platform/pcspkr/input/input6
[  727.776075] floppy0: no floppy controllers found
[  727.795955] ppdev: user-space parallel port driver
[  727.977254] Error: Driver 'pcspkr' is already registered, aborting...
[  731.360448] Adding 2200868k swap on /dev/sdc5.  Priority:-1 extents:1 across:2200868k 
[  731.489557] EXT4-fs (sdc7): re-mounted. Opts: errors=remount-ro,data=ordered
[  732.288340] lp0: using parport0 (interrupt-driven).
[  732.488096] Loading iSCSI transport class v2.0-870.
[  732.523625] iscsi: registered transport (tcp)
[  732.708913] fuse init (API version 7.26)
[  732.773971] tun: Universal TUN/TAP device driver, 1.6
[  732.774434] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[  732.847808] w83627ehf: Found W83627EHG chip at 0x290
[  732.851750] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB.PCI0.SBRG.SIOR.HWRE) (20170119/utaddress-247)
[  732.853348] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  762.430514] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
[  762.497316] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[  762.606990] FAT-fs (sdc6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  762.753765] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  772.514205] Process accounting resumed
[ 1317.700076] ------------[ cut here ]------------
[ 1317.700092] WARNING: CPU: 0 PID: 3229 at ./arch/x86/include/asm/fpu/internal.h:538 fpu__restore+0x343/0x490
[ 1317.700095] Modules linked in: cpufreq_conservative cpufreq_powersave cpufreq_userspace binfmt_misc nls_utf8 nls_cp437 vfat fat hwmon_vid tun cuse fuse iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi lp ppdev pcspkr powernow_k8 amd64_edac_mod edac_mce_amd edac_core evdev serio_raw k8temp radeon snd_via82xx snd_ac97_codec ac97_bus snd_mpu401_uart snd_pcm snd_timer snd_rawmidi snd_seq_device gameport snd ttm soundcore drm_kms_helper drm i2c_algo_bit sysimgblt sr_mod syscopyarea cdrom sysfillrect fb_sys_fops button asus_atk0110 sg acpi_cpufreq ata_generic parport_pc parport tpm_tis tpm_tis_core tpm ext4 mbcache crc16 jbd2 uas sd_mod usb_storage psmouse pata_via ehci_pci uhci_hcd ehci_hcd via_rhine usbcore eata mii i2c_viapro usb_common libata scsi_mod
[ 1317.700212] CPU: 0 PID: 3229 Comm: smbd Tainted: G      D         4.10.0+ #652
[ 1317.700215] Hardware name: System manufacturer System Product Name/A8V-MX, BIOS 0503    12/06/2005
[ 1317.700218] Call Trace:
[ 1317.700226]  dump_stack+0x77/0xac
[ 1317.700232]  __warn+0xea/0x110
[ 1317.700237]  ? fpu__restore+0x343/0x490
[ 1317.700242]  warn_slowpath_null+0x25/0x30
[ 1317.700246]  fpu__restore+0x343/0x490
[ 1317.700251]  __fpu__restore_sig+0x256/0x800
[ 1317.700261]  fpu__restore_sig+0x2a/0x50
[ 1317.700266]  restore_sigcontext.isra.10+0xd0/0xf0
[ 1317.700271]  sys_sigreturn+0x9c/0xb0
[ 1317.700276]  do_int80_syscall_32+0x61/0x150
[ 1317.700282]  entry_INT80_32+0x2f/0x2f
[ 1317.700285] EIP: 0xb76e6ce9
[ 1317.700288] EFLAGS: 00200246 CPU: 0
[ 1317.700291] EAX: fffffffc EBX: 00000003 ECX: bfcb9144 EDX: 00000001
[ 1317.700294] ESI: 000610cb EDI: bfcb9128 EBP: 00000000 ESP: bfcb90e4
[ 1317.700297]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[ 1317.700402] ---[ end trace b1bff84fe33f3678 ]---
[ 2199.567972] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 2700.692080] usb 2-6: new high-speed USB device number 3 using ehci-pci
[ 2700.841349] usb 2-6: New USB device found, idVendor=04e8, idProduct=6860
[ 2700.841358] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2700.841362] usb 2-6: Product: SAMSUNG_Android
[ 2700.841365] usb 2-6: Manufacturer: SAMSUNG
[ 2700.841368] usb 2-6: SerialNumber: 1101af07a03eb200
[ 3068.313765] perf: interrupt took too long (3145 > 3136), lowering kernel.perf_event_max_sample_rate to 63500
[ 3565.600541]  sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 > sdd3
[ 3616.900891]  sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 > sdd3
[ 3619.430478]  sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 > sdd3
[ 3998.230325] usb 2-6: USB disconnect, device number 3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux