[PATCH 1/1] fnic: Ratelimit printks to avoid flooding when vlan is not set by the switch.i

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Satish Kharat <satishkh@xxxxxxxxxxxxxxxxxx>

This is to avoid the log from being filled with vlan discovery
messages when there is no vlan configured on the switch.

Signed-off-by: Satish Kharat <satishkh@xxxxxxxxx>
Signed-off-by: Sesidhar Baddela <sebaddel@xxxxxxxxx>
---
 drivers/scsi/fnic/fnic_fcs.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index 3b7da66..8d2d86e 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -342,8 +342,11 @@ static void fnic_fcoe_send_vlan_req(struct fnic *fnic)
 
 	fnic_fcoe_reset_vlans(fnic);
 	fnic->set_vlan(fnic, 0);
-	FNIC_FCS_DBG(KERN_INFO, fnic->lport->host,
-		  "Sending VLAN request...\n");
+
+	if (printk_ratelimit())
+		FNIC_FCS_DBG(KERN_INFO, fnic->lport->host,
+			  "Sending VLAN request...\n");
+
 	skb = dev_alloc_skb(sizeof(struct fip_vlan));
 	if (!skb)
 		return;
@@ -1313,10 +1316,11 @@ void fnic_handle_fip_timer(struct fnic *fnic)
 
 	spin_lock_irqsave(&fnic->vlans_lock, flags);
 	if (list_empty(&fnic->vlans)) {
-		/* no vlans available, try again */
-		FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
-			  "Start VLAN Discovery\n");
 		spin_unlock_irqrestore(&fnic->vlans_lock, flags);
+		/* no vlans available, try again */
+		if (printk_ratelimit())
+			FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+				  "Start VLAN Discovery\n");
 		fnic_event_enq(fnic, FNIC_EVT_START_VLAN_DISC);
 		return;
 	}
@@ -1332,10 +1336,11 @@ void fnic_handle_fip_timer(struct fnic *fnic)
 		spin_unlock_irqrestore(&fnic->vlans_lock, flags);
 		break;
 	case FIP_VLAN_FAILED:
-		/* if all vlans are in failed state, restart vlan disc */
-		FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
-			  "Start VLAN Discovery\n");
 		spin_unlock_irqrestore(&fnic->vlans_lock, flags);
+		/* if all vlans are in failed state, restart vlan disc */
+		if (printk_ratelimit())
+			FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+				  "Start VLAN Discovery\n");
 		fnic_event_enq(fnic, FNIC_EVT_START_VLAN_DISC);
 		break;
 	case FIP_VLAN_SENT:
-- 
2.5.5




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux