The driver currently checks the SELF_TEST_FAILED first and then KERNEL_PANIC next. Under error conditions(boot code failure) both SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time. The driver has the capability to reset the controller on an KERNEL_PANIC, but not on SELF_TEST_FAILED. Fixed by first checking KERNEL_PANIC and then the others. Cc: stable@xxxxxxxxxxxxxxx Fixes: e8b12f0fb835223752 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family) Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@xxxxxxxxxxxxx> Reviewed-by: David Carroll <David.Carroll@xxxxxxxxxxxxx> Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx> --- Changes in V2: Corrected stray , in commit message drivers/scsi/aacraid/src.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 9b11e1a..71aaabd 100644 --- a/drivers/scsi/aacraid/src.c +++ b/drivers/scsi/aacraid/src.c @@ -437,16 +437,23 @@ static int aac_src_check_health(struct aac_dev *dev) u32 status = src_readl(dev, MUnit.OMR); /* + * Check to see if the board panic'd. + */ + if (unlikely(status & KERNEL_PANIC)) + goto err_blink; + + /* * Check to see if the board failed any self tests. */ if (unlikely(status & SELF_TEST_FAILED)) - return -1; + goto err_out; /* - * Check to see if the board panic'd. + * Check to see if the board failed any self tests. */ - if (unlikely(status & KERNEL_PANIC)) - return (status >> 16) & 0xFF; + if (unlikely(status & MONITOR_PANIC)) + goto err_out; + /* * Wait for the adapter to be up and running. */ @@ -456,6 +463,12 @@ static int aac_src_check_health(struct aac_dev *dev) * Everything is OK */ return 0; + +err_out: + return -1; + +err_blink: + return (status > 16) & 0xFF; } static inline u32 aac_get_vector(struct aac_dev *dev) -- 2.7.4
