Re: [PATCH 09/16] aacraid: Reload offlined drives after controller reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/14/2017 09:44 PM, Raghava Aditya Renukunta wrote:
> During the IOP reset stress testing, it was found that the drives can be
> marked offline when the adapter controller crashes and IO's are running
> in parallel. When the controller  does come back from the reset, the drive
> that is marked offline is not exposed.
> 
> Fixed by removing and adding drives that are marked offline. In addition
> invoke a scsi host bus rescan to capture any additional configuration
> changes.
> 
> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@xxxxxxxxxxxxx>
> Reviewed-by: David Carroll <David.Carroll@xxxxxxxxxxxxx>
> ---

Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>


-- 
Johannes Thumshirn                                          Storage
jthumshirn@xxxxxxx                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux