This patch lays the groundwork for supporting the new HBA-1000 controller
family.A new INIT structure INIT_STRUCT_8 has been added which allows for a
variable size for MSI-x vectors among other things, and is used for both
Series-8, HBA-1000 and SmartIOC-2000.
Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@xxxxxxxxxxxxx>
Signed-off-by: Dave Carroll <David.Carroll@xxxxxxxxxxxxx>
Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>
---
Changes in V2:
None
Changes in V3:
Removed Camel Case header variable definitions
Changes in V4:
None
drivers/scsi/aacraid/aachba.c | 8 +-
drivers/scsi/aacraid/aacraid.h | 100 +++++++++++------
drivers/scsi/aacraid/comminit.c | 239 +++++++++++++++++++++++++---------------
drivers/scsi/aacraid/commsup.c | 13 ++-
drivers/scsi/aacraid/linit.c | 2 +-
drivers/scsi/aacraid/rkt.c | 2 +-
drivers/scsi/aacraid/rx.c | 4 +-
drivers/scsi/aacraid/sa.c | 4 +-
drivers/scsi/aacraid/src.c | 27 +++--
9 files changed, 261 insertions(+), 138 deletions(-)
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 6678d1f..8a58b96 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -1144,7 +1144,9 @@ static int aac_read_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3
long ret;
aac_fib_init(fib);
- if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) {
+ if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 ||
+ dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) &&
+ !dev->sync_mode) {
struct aac_raw_io2 *readcmd2;
readcmd2 = (struct aac_raw_io2 *) fib_data(fib);
memset(readcmd2, 0, sizeof(struct aac_raw_io2));
@@ -1270,7 +1272,9 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u
long ret;
aac_fib_init(fib);
- if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 && !dev->sync_mode) {
+ if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 ||
+ dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) &&
+ !dev->sync_mode) {
struct aac_raw_io2 *writecmd2;
writecmd2 = (struct aac_raw_io2 *) fib_data(fib);
memset(writecmd2, 0, sizeof(struct aac_raw_io2));
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 01b457b..f712d8d 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -82,6 +82,11 @@ enum {
#define AAC_DEBUG_INSTRUMENT_AIF_DELETE
/*
+ * Interrupts
+ */
+#define AAC_MAX_HRRQ 64
+
+/*
* These macros convert from physical channels to virtual channels
*/
#define CONTAINER_CHANNEL (0)
@@ -491,41 +496,64 @@ enum fib_xfer_state {
#define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science
#define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */
#define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */
+#define ADAPTER_INIT_STRUCT_REVISION_8 8 // Thor
-struct aac_init
+union aac_init
{
- __le32 InitStructRevision;
- __le32 Sa_MSIXVectors;
- __le32 fsrev;
- __le32 CommHeaderAddress;
- __le32 FastIoCommAreaAddress;
- __le32 AdapterFibsPhysicalAddress;
- __le32 AdapterFibsVirtualAddress;
- __le32 AdapterFibsSize;
- __le32 AdapterFibAlign;
- __le32 printfbuf;
- __le32 printfbufsiz;
- __le32 HostPhysMemPages; /* number of 4k pages of host
- physical memory */
- __le32 HostElapsedSeconds; /* number of seconds since 1970. */
- /*
- * ADAPTER_INIT_STRUCT_REVISION_4 begins here
- */
- __le32 InitFlags; /* flags for supported features */
+ struct _r7 {
+ __le32 init_struct_revision;
+ __le32 no_of_msix_vectors;
+ __le32 fsrev;
+ __le32 comm_header_address;
+ __le32 fast_io_comm_area_address;
+ __le32 adapter_fibs_physical_address;
+ __le32 adapter_fibs_virtual_address;
+ __le32 adapter_fibs_size;
+ __le32 adapter_fib_align;
+ __le32 printfbuf;
+ __le32 printfbufsiz;
+ /* number of 4k pages of host phys. mem. */
+ __le32 host_phys_mem_pages;
+ /* number of seconds since 1970. */
+ __le32 host_elapsed_seconds;
+ /* ADAPTER_INIT_STRUCT_REVISION_4 begins here */
+ __le32 init_flags; /* flags for supported features */
#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010
#define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020
#define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040
#define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080
#define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100
- __le32 MaxIoCommands; /* max outstanding commands */
- __le32 MaxIoSize; /* largest I/O command */
- __le32 MaxFibSize; /* largest FIB to adapter */
- /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */
- __le32 MaxNumAif; /* max number of aif */
- /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */
- __le32 HostRRQ_AddrLow;
- __le32 HostRRQ_AddrHigh; /* Host RRQ (response queue) for SRC */
+#define INITFLAGS_DRIVER_SUPPORTS_HBA_MODE 0x00000400
+ __le32 max_io_commands; /* max outstanding commands */
+ __le32 max_io_size; /* largest I/O command */
+ __le32 max_fib_size; /* largest FIB to adapter */
+ /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */
+ __le32 max_num_aif; /* max number of aif */
+ /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */
+ /* Host RRQ (response queue) for SRC */
+ __le32 host_rrq_addr_low;
+ __le32 host_rrq_addr_high;
+ } r7;
+ struct _r8 {
+ /* ADAPTER_INIT_STRUCT_REVISION_8 */
+ __le32 init_struct_revision;
+ __le32 rr_queue_count;
+ __le32 host_elapsed_seconds; /* number of secs since 1970. */
+ __le32 init_flags;
+ __le32 max_io_size; /* largest I/O command */
+ __le32 max_num_aif; /* max number of aif */
+ __le32 reserved1;
+ __le32 reserved2;
+ struct _rrq {
+ __le32 host_addr_low;
+ __le32 host_addr_high;
+ __le16 msix_id;
+ __le16 element_count;
+ __le16 comp_thresh;
+ __le16 unused;
+ } rrq[1]; /* up to 64 RRQ addresses */
+ } r8;
};
enum aac_log_level {
@@ -729,6 +757,7 @@ struct sa_registers {
#define SA_INIT_NUM_MSIXVECTORS 1
+#define SA_MINIPORT_REVISION SA_INIT_NUM_MSIXVECTORS
#define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
@@ -1106,6 +1135,12 @@ struct aac_bus_info_response {
#define AAC_OPT_NEW_COMM_TYPE3 cpu_to_le32(1<<30)
#define AAC_OPT_NEW_COMM_TYPE4 cpu_to_le32(1<<31)
+#define AAC_COMM_PRODUCER 0
+#define AAC_COMM_MESSAGE 1
+#define AAC_COMM_MESSAGE_TYPE1 3
+#define AAC_COMM_MESSAGE_TYPE2 4
+#define AAC_COMM_MESSAGE_TYPE3 5
+
/* MSIX context */
struct aac_msix_ctx {
int vector_no;
@@ -1159,8 +1194,11 @@ struct aac_dev
resource_size_t base_size, dbg_size; /* Size of
* mapped in region */
-
- struct aac_init *init; /* Holds initialization info to communicate with adapter */
+ /*
+ * Holds initialization info
+ * to communicate with adapter
+ */
+ union aac_init *init;
dma_addr_t init_pa; /* Holds physical address of the init struct */
u32 *host_rrq; /* response queue
@@ -1229,10 +1267,6 @@ struct aac_dev
u8 needs_dac;
u8 raid_scsi_mode;
u8 comm_interface;
-# define AAC_COMM_PRODUCER 0
-# define AAC_COMM_MESSAGE 1
-# define AAC_COMM_MESSAGE_TYPE1 3
-# define AAC_COMM_MESSAGE_TYPE2 4
u8 raw_io_interface;
u8 raw_io_64;
u8 printf_enabled;
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 4f56b10..480ff01 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -68,104 +68,167 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
unsigned long size, align;
const unsigned long fibsize = dev->max_fib_size;
const unsigned long printfbufsiz = 256;
- unsigned long host_rrq_size = 0;
- struct aac_init *init;
+ unsigned long host_rrq_size, aac_init_size;
+ union aac_init *init;
dma_addr_t phys;
unsigned long aac_max_hostphysmempages;
- if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 ||
- dev->comm_interface == AAC_COMM_MESSAGE_TYPE2)
- host_rrq_size = (dev->scsi_host_ptr->can_queue
- + AAC_NUM_MGT_FIB) * sizeof(u32);
- size = fibsize + sizeof(struct aac_init) + commsize +
- commalign + printfbufsiz + host_rrq_size;
-
+ if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) ||
+ (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) ||
+ (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3))
+ host_rrq_size =
+ (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB)
+ * sizeof(u32);
+ else
+ host_rrq_size = 0;
+
+ aac_init_size = sizeof(union aac_init);
+ size = fibsize + aac_init_size + commsize + commalign +
+ printfbufsiz + host_rrq_size;
+
base = pci_alloc_consistent(dev->pdev, size, &phys);
- if(base == NULL)
- {
+ if (base == NULL) {
printk(KERN_ERR "aacraid: unable to create mapping.\n");
return 0;
}
+
dev->comm_addr = (void *)base;
dev->comm_phys = phys;
dev->comm_size = size;
-
- if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 ||
- dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
+
+ if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) ||
+ (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) ||
+ (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)) {
dev->host_rrq = (u32 *)(base + fibsize);
dev->host_rrq_pa = phys + fibsize;
memset(dev->host_rrq, 0, host_rrq_size);
}
- dev->init = (struct aac_init *)(base + fibsize + host_rrq_size);
+ dev->init = (union aac_init *)(base + fibsize + host_rrq_size);
dev->init_pa = phys + fibsize + host_rrq_size;
init = dev->init;
- init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
- if (dev->max_fib_size != sizeof(struct hw_fib))
- init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
- init->Sa_MSIXVectors = cpu_to_le32(SA_INIT_NUM_MSIXVECTORS);
- init->fsrev = cpu_to_le32(dev->fsrev);
+ if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
+ int i;
+ u64 addr;
+
+ init->r8.init_struct_revision =
+ cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_8);
+ init->r8.init_flags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
+ INITFLAGS_DRIVER_USES_UTC_TIME |
+ INITFLAGS_DRIVER_SUPPORTS_PM);
+ init->r8.init_flags |=
+ cpu_to_le32(INITFLAGS_DRIVER_SUPPORTS_HBA_MODE);
+ init->r8.rr_queue_count = cpu_to_le32(dev->max_msix);
+ init->r8.max_io_size =
+ cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
+ init->r8.max_num_aif = init->r8.reserved1 =
+ init->r8.reserved2 = 0;
+
+ for (i = 0; i < dev->max_msix; i++) {
+ addr = (u64)dev->host_rrq_pa + dev->vector_cap * i *
+ sizeof(u32);
+ init->r8.rrq[i].host_addr_high = cpu_to_le32(
+ upper_32_bits(addr));
+ init->r8.rrq[i].host_addr_low = cpu_to_le32(
+ lower_32_bits(addr));
+ init->r8.rrq[i].msix_id = i;
+ init->r8.rrq[i].element_count = cpu_to_le16(
+ (u16)dev->vector_cap);
+ init->r8.rrq[i].comp_thresh =
+ init->r8.rrq[i].unused = 0;
+ }
- /*
- * Adapter Fibs are the first thing allocated so that they
- * start page aligned
- */
- dev->aif_base_va = (struct hw_fib *)base;
-
- init->AdapterFibsVirtualAddress = 0;
- init->AdapterFibsPhysicalAddress = cpu_to_le32((u32)phys);
- init->AdapterFibsSize = cpu_to_le32(fibsize);
- init->AdapterFibAlign = cpu_to_le32(sizeof(struct hw_fib));
- /*
- * number of 4k pages of host physical memory. The aacraid fw needs
- * this number to be less than 4gb worth of pages. New firmware doesn't
- * have any issues with the mapping system, but older Firmware did, and
- * had *troubles* dealing with the math overloading past 32 bits, thus
- * we must limit this field.
- */
- aac_max_hostphysmempages = dma_get_required_mask(&dev->pdev->dev) >> 12;
- if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES)
- init->HostPhysMemPages = cpu_to_le32(aac_max_hostphysmempages);
- else
- init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
-
- init->InitFlags = cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
- INITFLAGS_DRIVER_SUPPORTS_PM);
- init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
- init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
- init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
- init->MaxNumAif = cpu_to_le32(dev->max_num_aif);
-
- if (dev->comm_interface == AAC_COMM_MESSAGE) {
- init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
- dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
- } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
- init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6);
- init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
- INITFLAGS_NEW_COMM_TYPE1_SUPPORTED | INITFLAGS_FAST_JBOD_SUPPORTED);
- init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32));
- init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff));
- dprintk((KERN_WARNING"aacraid: New Comm Interface type1 enabled\n"));
- } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
- init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_7);
- init->InitFlags |= cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
- INITFLAGS_NEW_COMM_TYPE2_SUPPORTED | INITFLAGS_FAST_JBOD_SUPPORTED);
- init->HostRRQ_AddrHigh = cpu_to_le32((u32)((u64)dev->host_rrq_pa >> 32));
- init->HostRRQ_AddrLow = cpu_to_le32((u32)(dev->host_rrq_pa & 0xffffffff));
- /* number of MSI-X */
- init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
- dprintk((KERN_WARNING"aacraid: New Comm Interface type2 enabled\n"));
+ pr_warn("aacraid: Comm Interface type3 enabled\n");
+ } else {
+ init->r7.init_struct_revision =
+ cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
+ if (dev->max_fib_size != sizeof(struct hw_fib))
+ init->r7.init_struct_revision =
+ cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
+ init->r7.no_of_msix_vectors = cpu_to_le32(SA_MINIPORT_REVISION);
+ init->r7.fsrev = cpu_to_le32(dev->fsrev);
+
+ /*
+ * Adapter Fibs are the first thing allocated so that they
+ * start page aligned
+ */
+ dev->aif_base_va = (struct hw_fib *)base;
+
+ init->r7.adapter_fibs_virtual_address = 0;
+ init->r7.adapter_fibs_physical_address = cpu_to_le32((u32)phys);
+ init->r7.adapter_fibs_size = cpu_to_le32(fibsize);
+ init->r7.adapter_fib_align = cpu_to_le32(sizeof(struct hw_fib));
+
+ /*
+ * number of 4k pages of host physical memory. The aacraid fw
+ * needs this number to be less than 4gb worth of pages. New
+ * firmware doesn't have any issues with the mapping system, but
+ * older Firmware did, and had *troubles* dealing with the math
+ * overloading past 32 bits, thus we must limit this field.
+ */
+ aac_max_hostphysmempages =
+ dma_get_required_mask(&dev->pdev->dev) >> 12;
+ if (aac_max_hostphysmempages < AAC_MAX_HOSTPHYSMEMPAGES)
+ init->r7.host_phys_mem_pages =
+ cpu_to_le32(aac_max_hostphysmempages);
+ else
+ init->r7.host_phys_mem_pages =
+ cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
+
+ init->r7.init_flags =
+ cpu_to_le32(INITFLAGS_DRIVER_USES_UTC_TIME |
+ INITFLAGS_DRIVER_SUPPORTS_PM);
+ init->r7.max_io_commands =
+ cpu_to_le32(dev->scsi_host_ptr->can_queue +
+ AAC_NUM_MGT_FIB);
+ init->r7.max_io_size =
+ cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
+ init->r7.max_fib_size = cpu_to_le32(dev->max_fib_size);
+ init->r7.max_num_aif = cpu_to_le32(dev->max_num_aif);
+
+ if (dev->comm_interface == AAC_COMM_MESSAGE) {
+ init->r7.init_flags |=
+ cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
+ pr_warn("aacraid: Comm Interface enabled\n");
+ } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1) {
+ init->r7.init_struct_revision =
+ cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_6);
+ init->r7.init_flags |=
+ cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
+ INITFLAGS_NEW_COMM_TYPE1_SUPPORTED |
+ INITFLAGS_FAST_JBOD_SUPPORTED);
+ init->r7.host_rrq_addr_high =
+ cpu_to_le32(upper_32_bits(dev->host_rrq_pa));
+ init->r7.host_rrq_addr_low =
+ cpu_to_le32(lower_32_bits(dev->host_rrq_pa));
+ pr_warn("aacraid: Comm Interface type1 enabled\n");
+ } else if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
+ init->r7.init_struct_revision =
+ cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_7);
+ init->r7.init_flags |=
+ cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED |
+ INITFLAGS_NEW_COMM_TYPE2_SUPPORTED |
+ INITFLAGS_FAST_JBOD_SUPPORTED);
+ init->r7.host_rrq_addr_high =
+ cpu_to_le32(upper_32_bits(dev->host_rrq_pa));
+ init->r7.host_rrq_addr_low =
+ cpu_to_le32(lower_32_bits(dev->host_rrq_pa));
+ init->r7.no_of_msix_vectors =
+ cpu_to_le32(dev->max_msix);
+ /* must be the COMM_PREFERRED_SETTINGS values */
+ pr_warn("aacraid: Comm Interface type2 enabled\n");
+ }
}
/*
* Increment the base address by the amount already used
*/
- base = base + fibsize + host_rrq_size + sizeof(struct aac_init);
+ base = base + fibsize + host_rrq_size + aac_init_size;
phys = (dma_addr_t)((ulong)phys + fibsize + host_rrq_size +
- sizeof(struct aac_init));
+ aac_init_size);
/*
* Align the beginning of Headers to commalign
@@ -177,7 +240,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
* Fill in addresses of the Comm Area Headers and Queues
*/
*commaddr = base;
- init->CommHeaderAddress = cpu_to_le32((u32)phys);
+ if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3)
+ init->r7.comm_header_address = cpu_to_le32((u32)phys);
/*
* Increment the base address by the size of the CommArea
*/
@@ -187,12 +251,14 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
* Place the Printf buffer area after the Fast I/O comm area.
*/
dev->printfbuf = (void *)base;
- init->printfbuf = cpu_to_le32(phys);
- init->printfbufsiz = cpu_to_le32(printfbufsiz);
+ if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3) {
+ init->r7.printfbuf = cpu_to_le32(phys);
+ init->r7.printfbufsiz = cpu_to_le32(printfbufsiz);
+ }
memset(base, 0, printfbufsiz);
return 1;
}
-
+
static void aac_queue_init(struct aac_dev * dev, struct aac_queue * q, u32 *mem, int qsize)
{
atomic_set(&q->numpending, 0);
@@ -436,26 +502,27 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
0, 0, 0, 0, 0, 0,
- status+0, status+1, status+2, status+3, NULL)) &&
- (status[0] == 0x00000001)) {
+ status+0, status+1, status+2, status+3, status+4)) &&
+ (status[0] == 0x00000001)) {
dev->doorbell_mask = status[3];
- if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64))
+ if (status[1] & AAC_OPT_NEW_COMM_64)
dev->raw_io_64 = 1;
dev->sync_mode = aac_sync_mode;
if (dev->a_ops.adapter_comm &&
- (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM))) {
+ (status[1] & AAC_OPT_NEW_COMM)) {
dev->comm_interface = AAC_COMM_MESSAGE;
dev->raw_io_interface = 1;
- if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE1))) {
+ if ((status[1] & AAC_OPT_NEW_COMM_TYPE1)) {
/* driver supports TYPE1 (Tupelo) */
dev->comm_interface = AAC_COMM_MESSAGE_TYPE1;
- } else if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE2))) {
- /* driver supports TYPE2 (Denali) */
+ } else if (status[1] & AAC_OPT_NEW_COMM_TYPE2) {
+ /* driver supports TYPE2 (Denali, Yosemite) */
dev->comm_interface = AAC_COMM_MESSAGE_TYPE2;
- } else if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE4)) ||
- (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE3))) {
- /* driver doesn't TYPE3 and TYPE4 */
- /* switch to sync. mode */
+ } else if (status[1] & AAC_OPT_NEW_COMM_TYPE3) {
+ /* driver supports TYPE3 (Yosemite, Thor) */
+ dev->comm_interface = AAC_COMM_MESSAGE_TYPE3;
+ } else if (status[1] & AAC_OPT_NEW_COMM_TYPE4) {
+ /* not supported TYPE - switch to sync. mode */
dev->comm_interface = AAC_COMM_MESSAGE_TYPE2;
dev->sync_mode = 1;
}
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 9e7551f..d18ed9a 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -129,11 +129,14 @@ int aac_fib_setup(struct aac_dev * dev)
struct hw_fib *hw_fib;
dma_addr_t hw_fib_pa;
int i;
+ u32 max_cmds;
while (((i = fib_map_alloc(dev)) == -ENOMEM)
&& (dev->scsi_host_ptr->can_queue > (64 - AAC_NUM_MGT_FIB))) {
- dev->init->MaxIoCommands = cpu_to_le32((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) >> 1);
- dev->scsi_host_ptr->can_queue = le32_to_cpu(dev->init->MaxIoCommands) - AAC_NUM_MGT_FIB;
+ max_cmds = (dev->scsi_host_ptr->can_queue+AAC_NUM_MGT_FIB) >> 1;
+ dev->scsi_host_ptr->can_queue = max_cmds - AAC_NUM_MGT_FIB;
+ if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3)
+ dev->init->r7.max_io_commands = cpu_to_le32(max_cmds);
}
if (i<0)
return -ENOMEM;
@@ -761,7 +764,8 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
unsigned long qflags;
if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE1 ||
- dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
+ dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 ||
+ dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
kfree(hw_fib);
return 0;
}
@@ -1817,7 +1821,8 @@ int aac_command_thread(void *data)
* and pre-allocate a set of fibs outside the
* lock.
*/
- num = le32_to_cpu(dev->init->AdapterFibsSize)
+ num = le32_to_cpu(dev->init->
+ r7.adapter_fibs_size)
/ sizeof(struct hw_fib); /* some extra */
spin_lock_irqsave(&dev->fib_lock, flagv);
entry = dev->fib_list.next;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index fd26a2d..0f3de1e 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1368,7 +1368,7 @@ static int aac_acquire_resources(struct aac_dev *dev)
/* After EEH recovery or suspend resume, max_msix count
* may change, therfore updating in init as well.
*/
- dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
+ dev->init->r7.no_of_msix_vectors = cpu_to_le32(dev->max_msix);
aac_adapter_start(dev);
}
return 0;
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index 7d8013f..6dff8ad 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -60,7 +60,7 @@ static int aac_rkt_select_comm(struct aac_dev *dev, int comm)
* case warrants this half baked, but convenient, check here.
*/
if (dev->scsi_host_ptr->can_queue > AAC_NUM_IO_FIB_RKT) {
- dev->init->MaxIoCommands =
+ dev->init->r7.max_io_commands =
cpu_to_le32(AAC_NUM_IO_FIB_RKT + AAC_NUM_MGT_FIB);
dev->scsi_host_ptr->can_queue = AAC_NUM_IO_FIB_RKT;
}
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index ac16380..67213b9 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -315,10 +315,10 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
static void aac_rx_start_adapter(struct aac_dev *dev)
{
- struct aac_init *init;
+ union aac_init *init;
init = dev->init;
- init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+ init->r7.host_elapsed_seconds = cpu_to_le32(get_seconds());
// We can only use a 32 bit address here
rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index 869aea2..b8538e0 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -245,12 +245,12 @@ static void aac_sa_interrupt_adapter (struct aac_dev *dev)
static void aac_sa_start_adapter(struct aac_dev *dev)
{
- struct aac_init *init;
+ union aac_init *init;
/*
* Fill in the remaining pieces of the init.
*/
init = dev->init;
- init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+ init->r7.host_elapsed_seconds = cpu_to_le32(get_seconds());
/* We can only use a 32 bit address here */
sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
(u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0,
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 0c45388..a5f7a6f 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -384,7 +384,7 @@ static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
static void aac_src_start_adapter(struct aac_dev *dev)
{
- struct aac_init *init;
+ union aac_init *init;
int i;
/* reset host_rrq_idx first */
@@ -395,11 +395,22 @@ static void aac_src_start_adapter(struct aac_dev *dev)
dev->fibs_pushed_no = 0;
init = dev->init;
- init->HostElapsedSeconds = cpu_to_le32(get_seconds());
+ if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
+ init->r8.host_elapsed_seconds = cpu_to_le32(get_seconds());
+ src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
+ (u32)(ulong)dev->init_pa,
+ (u32)((ulong)dev->init_pa>>32),
+ sizeof(struct _r8) +
+ (AAC_MAX_HRRQ - 1) * sizeof(struct _rrq),
+ 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+ } else {
+ init->r7.host_elapsed_seconds = cpu_to_le32(get_seconds());
+ // We can only use a 32 bit address here
+ src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
+ (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0,
+ NULL, NULL, NULL, NULL, NULL);
+ }
- /* We can only use a 32 bit address here */
- src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
- 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
/**
@@ -467,7 +478,8 @@ static int aac_src_deliver_message(struct fib *fib)
atomic_inc(&dev->rrq_outstanding[vector_no]);
- if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
+ if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) ||
+ (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)) {
/* Calculate the amount to the fibsize bits */
fibsize = (hdr_size + 127) / 128 - 1;
if (fibsize > (ALIGN32 - 1))
@@ -897,7 +909,8 @@ int aac_srcv_init(struct aac_dev *dev)
if (aac_init_adapter(dev) == NULL)
goto error_iounmap;
- if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE2)
+ if ((dev->comm_interface != AAC_COMM_MESSAGE_TYPE2) &&
+ (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3))
goto error_iounmap;
if (dev->msi_enabled)
aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
--
2.7.4
