I have an interesting problem on my Linux box: Setup: IBM x445 server 2 x QLA2340 fiber HBAs Brocade Director 12000 switch Hitachi HDS 9960 RAID array SLES 9 OS, kernel-bigsmp-2.6.5-7.201 Problem: The qla2xxx driver *always* reports 36 SCSI2 LUNs, regardless of what I configure on the RAID array. It should report 17 SCSI3 LUNs. I am certain the problem is with/close to the OS because: * I have another x445 box running the same OS and kernel version and it has no problems. * I have swapped the HBAs with another box and the problem stayed in the box. The LUNs I have assigned to this box showed up correctly in the other server during the swap. * I've even swapped the M/B (though not the PCI backplane, which is separate) and moved the HBAs around in the PCI slots. I've worked on this for about six weeks now and I'm running out of ideas. Any help debugging this is appreciated. Thanks! -- Arild Jensen - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
