From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Correctly set registers in v2 for root PHY hardreset for directly
attached disk.
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Reviewed-by: Johannes Thumshirn <jthumshirn@xxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 93fceda..2e776b7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -207,6 +207,8 @@
#define TXID_AUTO (PORT_BASE + 0xb8)
#define TXID_AUTO_CT3_OFF 1
#define TXID_AUTO_CT3_MSK (0x1 << TXID_AUTO_CT3_OFF)
+#define TX_HARDRST_OFF 2
+#define TX_HARDRST_MSK (0x1 << TX_HARDRST_OFF)
#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8)
#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc)
@@ -1078,7 +1080,15 @@ static void stop_phy_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
static void phy_hard_reset_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ u32 txid_auto;
+
stop_phy_v2_hw(hisi_hba, phy_no);
+ if (phy->identify.device_type == SAS_END_DEVICE) {
+ txid_auto = hisi_sas_phy_read32(hisi_hba, phy_no, TXID_AUTO);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
+ txid_auto | TX_HARDRST_MSK);
+ }
msleep(100);
start_phy_v2_hw(hisi_hba, phy_no);
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
