[PATCH v3 08/10] qla2xxx: Reduce exess wait during chip reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <quinn.tran@xxxxxxxxxx>

Soft reset and Risc reset should take 100uS to complete.
This change pad the timeout up to 400uS, which should be
plenty.

Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Quinn Tran <quinn.tran@xxxxxxxxxx>
Signed-off-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 632d5f3..7b6317c 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1191,7 +1191,7 @@ static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
 
 	/* Wait for soft-reset to complete. */
 	RD_REG_DWORD(&reg->ctrl_status);
-	for (cnt = 0; cnt < 6000000; cnt++) {
+	for (cnt = 0; cnt < 60; cnt++) {
 		barrier();
 		if ((RD_REG_DWORD(&reg->ctrl_status) &
 		    CSRX_ISP_SOFT_RESET) == 0)
@@ -1234,7 +1234,7 @@ static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *,
 	RD_REG_DWORD(&reg->hccr);
 
 	RD_REG_WORD(&reg->mailbox0);
-	for (cnt = 6000000; RD_REG_WORD(&reg->mailbox0) != 0 &&
+	for (cnt = 60; RD_REG_WORD(&reg->mailbox0) != 0 &&
 	    rval == QLA_SUCCESS; cnt--) {
 		barrier();
 		if (cnt)
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux