> From: Benjamin Poirier [mailto:benjamin.poirier@xxxxxxxxx] On Behalf Of > Benjamin Poirier > Sent: Friday, December 23, 2016 2:01 PM > > bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Tue > Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR > Series Adapter Firmware"). > > bna was updated to use the newer firmware on Thu, 19 Feb 2015 16:02:32 > -0500 in 3f307c3d70 ("bna: Update the Driver and Firmware Version") > > bfa was not updated. I presume this was an oversight but it broke support > for bfa+bna cards such as the following > 04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc. > 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) > 04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc. > 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) > 04:00.2 Ethernet controller [0200]: Brocade Communications > Systems, > Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) > 04:00.3 Ethernet controller [0200]: Brocade Communications > Systems, > Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) > > Currently, if the bfa module is loaded first, bna fails to probe the respective > devices with [ 215.026787] bna: QLogic BR-series 10G Ethernet driver - > version: 3.2.25.1 [ 215.043707] bna 0000:04:00.2: bar0 mapped to > ffffc90001fc0000, len 262144 [ 215.060656] bna 0000:04:00.2: initialization > failed err=1 [ 215.073893] bna 0000:04:00.3: bar0 mapped to > ffffc90002040000, len 262144 [ 215.090644] bna 0000:04:00.3: initialization > failed err=1 > > Whereas if bna is loaded first, bfa fails with [ 249.592109] QLogic BR-series > BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 249.610738] bfa 0000:04:00.0: > Running firmware version is incompatible with the driver version [ > 249.833513] bfa 0000:04:00.0: bfa init failed [ 249.833919] scsi host6: QLogic > BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0 [ > 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with > the driver version [ 250.045449] bfa 0000:04:00.1: bfa init failed [ 250.045962] > scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: > 3.2.25.0 > > Increase bfa's requested firmware version. > I only tested that all of the devices probe without error. > > Cc: Rasesh Mody <rasesh.mody@xxxxxxxxxx> > Reported-by: Tim Ehlers <tehlers@xxxxxxx> > Signed-off-by: Benjamin Poirier <bpoirier@xxxxxxxx> Acked-by: Rasesh Mody <rasesh.mody@xxxxxxxxxx> Thanks! We also need to bump up the BFA driver version to 3.2.25.1. > --- > drivers/scsi/bfa/bfad.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index > 9d253cb..e70410b 100644 > --- a/drivers/scsi/bfa/bfad.c > +++ b/drivers/scsi/bfa/bfad.c > @@ -64,9 +64,9 @@ int max_rport_logins = > BFA_FCS_MAX_RPORT_LOGINS; > u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size; > u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2; > > -#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin" > -#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin" > -#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin" > +#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin" > +#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin" > +#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin" > > static u32 *bfad_load_fwimg(struct pci_dev *pdev); static void > bfad_free_fwimg(void); > -- > 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
