SAS3.5 Generic Megaraid based Controllers will have the support for 128 MSI-X vectors,
resulting in the need to support 128 reply queues
This patch is depending on patch 1 and same as V5
Signed-off-by: Sasikumar Chandrasekaran <sasikumar.pc@xxxxxxxxxxxx>
---
drivers/scsi/megaraid/megaraid_sas.h | 1 +
drivers/scsi/megaraid/megaraid_sas_base.c | 25 ++++++++++++++++++-------
drivers/scsi/megaraid/megaraid_sas_fusion.c | 4 ++--
3 files changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index cb82195..36aac88 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -2148,6 +2148,7 @@ struct megasas_instance {
bool dev_handle;
bool fw_sync_cache_support;
bool is_ventura;
+ bool msix_combined;
};
struct MR_LD_VF_MAP {
u32 size;
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index ea04fce..5a1a53b 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -5072,13 +5072,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
goto fail_ready_state;
}
- /*
- * MSI-X host index 0 is common for all adapter.
- * It is used for all MPT based Adapters.
- */
- instance->reply_post_host_index_addr[0] =
- (u32 __iomem *)((u8 __iomem *)instance->reg_set +
- MPI2_REPLY_POST_HOST_INDEX_OFFSET);
+
/* Check if MSI-X is supported while in ready state */
msix_enable = (instance->instancet->read_fw_status_reg(reg_set) &
@@ -5098,6 +5092,9 @@ static int megasas_init_fw(struct megasas_instance *instance)
instance->msix_vectors = ((scratch_pad_2
& MR_MAX_REPLY_QUEUES_EXT_OFFSET)
>> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1;
+ if (instance->msix_vectors > 16)
+ instance->msix_combined = true;
+
if (rdpq_enable)
instance->is_rdpq = (scratch_pad_2 & MR_RDPQ_MODE_OFFSET) ?
1 : 0;
@@ -5131,6 +5128,20 @@ static int megasas_init_fw(struct megasas_instance *instance)
else
instance->msix_vectors = 0;
}
+ /*
+ * MSI-X host index 0 is common for all adapter.
+ * It is used for all MPT based Adapters.
+ */
+ if (instance->msix_combined) {
+ instance->reply_post_host_index_addr[0] =
+ (u32 *)((u8 *)instance->reg_set +
+ MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET);
+ } else {
+ instance->reply_post_host_index_addr[0] =
+ (u32 *)((u8 *)instance->reg_set +
+ MPI2_REPLY_POST_HOST_INDEX_OFFSET);
+ }
+
i = pci_alloc_irq_vectors(instance->pdev, 1, 1, PCI_IRQ_LEGACY);
if (i < 0)
goto fail_setup_irqs;
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 8d7a397..413e2030 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -2391,7 +2391,7 @@ static void megasas_build_ld_nonrw_fusion(struct megasas_instance *instance,
* pending to be completed
*/
if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) {
- if (fusion->adapter_type == INVADER_SERIES)
+ if (instance->msix_combined)
writel(((MSIxIndex & 0x7) << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[MSIxIndex/8]);
@@ -2407,7 +2407,7 @@ static void megasas_build_ld_nonrw_fusion(struct megasas_instance *instance,
return IRQ_NONE;
wmb();
- if (fusion->adapter_type == INVADER_SERIES)
+ if (instance->msix_combined)
writel(((MSIxIndex & 0x7) << 24) |
fusion->last_reply_idx[MSIxIndex],
instance->reply_post_host_index_addr[MSIxIndex/8]);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
