On Tue, Dec 20, 2016 at 12:02:27AM -0200, Mauricio Faria de Oliveira wrote: > When a SCSI command (e.g., read operation) is partially completed > with good status and residual bytes (i.e., not all the bytes from > the specified transfer length were transferred) the SCSI midlayer > will update the request/bios with the completed bytes and requeue > the request in order to complete the remainder/pending bytes. > > However, when the device sector size is greater than the 512-byte > default/kernel sector size, alignment restrictions and validation > apply (both to the starting logical block address, and the number > of logical blocks to transfer) -- values must be multiples of the > device sector size, otherwise the kernel fails the request in the > preparation stage (e.g., sd_setup_read_write_cmnd() at sd.c file): How do you even get an unaligned residual count? Except for SES processor devices (which will only issue BLOCK_PC commands) this is not allowed by SPC: "The residual count shall be reported in bytes if the peripheral device type in the destination target descriptor is 03h (i.e., processor device), and in destination device blocks for all other device type codes." -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
