During NVRAM initialization in target mode, reset reserved
fields in firmware options to Zero (BIT 15)
Signed-off-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Giridhar Malavali <giridhar.malavali@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_target.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index b9c559c..5037b51 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -6539,6 +6539,14 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
/* Disable Full Login after LIP */
nv->host_p &= cpu_to_le32(~BIT_10);
+
+ /*
+ * clear BIT 15 explicitly as we have seen at least
+ * a couple of instances where this was set and this
+ * was causing the firmware to not be initialized.
+ */
+ nv->firmware_options_1 &=
+ __constant_cpu_to_le32(~BIT_15);
/* Enable target PRLI control */
nv->firmware_options_2 |= cpu_to_le32(BIT_14);
} else {
@@ -6623,11 +6631,18 @@ static void qlt_disable_vha(struct scsi_qla_host *vha)
/* Disable ini mode, if requested */
if (!qla_ini_mode_enabled(vha))
nv->firmware_options_1 |= cpu_to_le32(BIT_5);
-
/* Disable Full Login after LIP */
nv->firmware_options_1 &= cpu_to_le32(~BIT_13);
/* Enable initial LIP */
nv->firmware_options_1 &= cpu_to_le32(~BIT_9);
+ /*
+ * clear BIT 15 explicitly as we have seen at
+ * least a couple of instances where this was set
+ * and this was causing the firmware to not be
+ * initialized.
+ */
+ nv->firmware_options_1 &=
+ __constant_cpu_to_le32(~BIT_15);
if (ql2xtgt_tape_enable)
/* Enable FC tape support */
nv->firmware_options_2 |= cpu_to_le32(BIT_12);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
