Hi Hannes,
Please find the response below,
On 11/11/16 10:13 PM, "Hannes Reinecke" <hare@xxxxxxx> wrote:
>On 11/08/2016 07:57 AM, Manish Rangankar wrote:
>> The QLogic FastLinQ Driver for iSCSI (qedi) is the iSCSI specific module
>> for 41000 Series Converged Network Adapters by QLogic.
>>
>> This patch consists of following changes:
>> - MAINTAINERS Makefile and Kconfig changes for qedi,
>> - PCI driver registration,
>> - iSCSI host level initialization,
>> - Debugfs and log level infrastructure.
>>
>> Signed-off-by: Nilesh Javali <nilesh.javali@xxxxxxxxxx>
>> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@xxxxxxxxxx>
>> Signed-off-by: Chad Dupuis <chad.dupuis@xxxxxxxxxx>
>> Signed-off-by: Saurav Kashyap <saurav.kashyap@xxxxxxxxxx>
>> Signed-off-by: Arun Easi <arun.easi@xxxxxxxxxx>
>> Signed-off-by: Manish Rangankar <manish.rangankar@xxxxxxxxxx>
>> ---
>> MAINTAINERS | 6 +
>> drivers/net/ethernet/qlogic/Kconfig | 12 -
>> drivers/scsi/Kconfig | 1 +
>> drivers/scsi/Makefile | 1 +
>> drivers/scsi/qedi/Kconfig | 10 +
>> drivers/scsi/qedi/Makefile | 5 +
>> drivers/scsi/qedi/qedi.h | 291 +++++++
>> drivers/scsi/qedi/qedi_dbg.c | 143 ++++
>> drivers/scsi/qedi/qedi_dbg.h | 144 ++++
>> drivers/scsi/qedi/qedi_debugfs.c | 244 ++++++
>> drivers/scsi/qedi/qedi_hsi.h | 52 ++
>> drivers/scsi/qedi/qedi_main.c | 1616
>>+++++++++++++++++++++++++++++++++++
>> drivers/scsi/qedi/qedi_sysfs.c | 52 ++
>> drivers/scsi/qedi/qedi_version.h | 14 +
>> 14 files changed, 2579 insertions(+), 12 deletions(-)
>> create mode 100644 drivers/scsi/qedi/Kconfig
>> create mode 100644 drivers/scsi/qedi/Makefile
>> create mode 100644 drivers/scsi/qedi/qedi.h
>> create mode 100644 drivers/scsi/qedi/qedi_dbg.c
>> create mode 100644 drivers/scsi/qedi/qedi_dbg.h
>> create mode 100644 drivers/scsi/qedi/qedi_debugfs.c
>> create mode 100644 drivers/scsi/qedi/qedi_hsi.h
>> create mode 100644 drivers/scsi/qedi/qedi_main.c
>> create mode 100644 drivers/scsi/qedi/qedi_sysfs.c
>> create mode 100644 drivers/scsi/qedi/qedi_version.h
>>
[...]
>>
>> +static enum qed_int_mode qedi_int_mode_to_enum(void)
>> +{
>> + switch (int_mode) {
>> + case 0: return QED_INT_MODE_MSIX;
>> + case 1: return QED_INT_MODE_INTA;
>> + case 2: return QED_INT_MODE_MSI;
>> + default:
>> + QEDI_ERR(NULL, "Unknown qede_int_mode=%08x; "
>> + "Defaulting to MSI-x\n", int_mode);
>> + return QED_INT_MODE_MSIX;
>> + }
>> +}
>Errm. A per-driver interrupt mode?
>How very curious.
>You surely want to make that per-HBA, right?
This was added for testing purpose, we will remove this code.
[...]
>> +static int qedi_request_msix_irq(struct qedi_ctx *qedi)
>> +{
>> + int i, rc, cpu;
>> +
>> + cpu = cpumask_first(cpu_online_mask);
>> + for (i = 0; i < MIN_NUM_CPUS_MSIX(qedi); i++) {
>> + rc = request_irq(qedi->int_info.msix[i].vector,
>> + qedi_msix_handler, 0, "qedi",
>> + &qedi->fp_array[i]);
>> +
>> + if (rc) {
>> + QEDI_WARN(&qedi->dbg_ctx, "request_irq failed.\n");
>> + qedi_sync_free_irqs(qedi);
>> + return rc;
>> + }
>> + qedi->int_info.used_cnt++;
>> + rc = irq_set_affinity_hint(qedi->int_info.msix[i].vector,
>> + get_cpu_mask(cpu));
>> + cpu = cpumask_next(cpu, cpu_online_mask);
>> + }
>> +
>> + return 0;
>> +}
>Please use the irq-affinity rework from Christoph here; that'll save you
>the additional msix vectors allocation.
The existing qed* driver(s) and common module (qed) framework is built on
top of the older pci_enable_msix_*() API. The new framework requires
re-work on the existing qed common module API. That would need
co-ordination among other dependent drivers (e.g.: qede network driver,
which is already in the tree). We would prefer to add this as a follow on
(to the initial submission) effort, with additional testing done and
submission co-ordinated across protocol drivers.
Thanks,
Manish
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
