On 11/14/16, 1:26 PM, "Mauricio Faria de Oliveira" <mauricfo@xxxxxxxxxxxxxxxxxx> wrote:
>The previous commit ("qla2xxx: fix invalid DMA access after command
>aborts in PCI device remove") introduced a regression during an EEH
>recovery, since the change to the qla2x00_abort_all_cmds() function
>calls qla2xxx_eh_abort(), which verifies the EEH recovery condition
>but handles it heavy-handed. (commit a465537ad1a4 "qla2xxx: Disable
>the adapter and skip error recovery in case of register disconnect.")
>
>This problem warrants a more general/optimistic solution right into
>qla2xxx_eh_abort() (eg in case a real command abort arrives during
>EEH recovery, or if it takes long enough to trigger command aborts);
>but it's still worth to add a check to ensure the code added by the
>previous commit is correct and contained within its owner function.
>
>This commit just adds a 'if (!ha->flags.eeh_busy)' check around it.
>(ahem; a trivial fix for this -rc series; sorry for this oversight.)
>
>With it applied, both PCI device remove and EEH recovery works fine.
>
>Fixes: 1535aa75a3d8 ("scsi: qla2xxx: fix invalid DMA access after
>command aborts in PCI device remove")
>Signed-off-by: Mauricio Faria de Oliveira <mauricfo@xxxxxxxxxxxxxxxxxx>
>---
> drivers/scsi/qla2xxx/qla_os.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
>diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
>index 567fa080e261..56d6142852a5 100644
>--- a/drivers/scsi/qla2xxx/qla_os.c
>+++ b/drivers/scsi/qla2xxx/qla_os.c
>@@ -1456,15 +1456,20 @@ uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha)
> for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
> sp = req->outstanding_cmds[cnt];
> if (sp) {
>- /* Get a reference to the sp and drop the lock.
>- * The reference ensures this sp->done() call
>- * - and not the call in qla2xxx_eh_abort() -
>- * ends the SCSI command (with result 'res').
>+ /* Don't abort commands in adapter during EEH
>+ * recovery as it's not accessible/responding.
> */
>- sp_get(sp);
>- spin_unlock_irqrestore(&ha->hardware_lock, flags);
>- qla2xxx_eh_abort(GET_CMD_SP(sp));
>- spin_lock_irqsave(&ha->hardware_lock, flags);
>+ if (!ha->flags.eeh_busy) {
>+ /* Get a reference to the sp and drop the lock.
>+ * The reference ensures this sp->done() call
>+ * - and not the call in qla2xxx_eh_abort() -
>+ * ends the SCSI command (with result 'res').
>+ */
>+ sp_get(sp);
>+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
>+ qla2xxx_eh_abort(GET_CMD_SP(sp));
>+ spin_lock_irqsave(&ha->hardware_lock, flags);
>+ }
> req->outstanding_cmds[cnt] = NULL;
> sp->done(vha, sp, res);
> }
>--
>1.8.3.1
>
Acked-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Thanks,
Himanshu
��.n��������+%������w��{.n�����{������ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
