[PATCH 0/5] megaraid_sas: scsi-mq support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

here's the patcheset to enable scsi-mq support for megaraid_sas.
It's based on hch's irq rework currently pending in tip.
As the overall results have been less then stellar (see the thread
'reduced latency is killing performance') I've also added a module
parameter 'use_blk_mq' to allowing to switch off scsi-mq support
on a per-driver basis.

Hannes Reinecke (5):
  megaraid_sas: switch to pci_alloc_irq_vectors
  megaraid_sas: avoid calling megasas_lookup_instance()
  megaraid_sas: do not crash on invalid completion
  megaraid_sas: scsi-mq support
  megaraid_sas: add mmio barrier after register writes

 drivers/scsi/megaraid/megaraid_sas.h        |   4 +-
 drivers/scsi/megaraid/megaraid_sas_base.c   | 109 ++++++++++++++++------------
 drivers/scsi/megaraid/megaraid_sas_fusion.c |  63 +++++++++++-----
 3 files changed, 109 insertions(+), 67 deletions(-)

-- 
1.8.5.6

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux