[PATCH] Revert "target: Fix residual overflow handling in target_complete_cmd_with_length"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>

This reverts commit c1ccbfe0311e2380a6d2dcb0714b36904f5d586f.

Reverting this patch, as it incorrectly assumes the additional length
for INQUIRY in target_complete_cmd_with_length() is SCSI allocation
length, which breaks existing user-space code when SCSI allocation
length is smaller than additional length.

  root@scsi-mq:~# sg_inq --len=4 -vvvv /dev/sdb
  found bsg_major=253
  open /dev/sdb with flags=0x800
      inquiry cdb: 12 00 00 00 04 00
        duration=0 ms
      inquiry: pass-through requested 4 bytes (data-in) but got -28 bytes
      inquiry: pass-through can't get negative bytes, say it got none
      inquiry: got too few bytes (0)
  INQUIRY resid (32) should never exceed requested len=4
      inquiry: failed requesting 4 byte response: Malformed response to
               SCSI command [resid=32]

AFAICT the original change was not to address a specific host issue,
so go ahead and revert to original logic for now.

Cc: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Cc: Sumit Rai <sumitrai96@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # 4.8+
Signed-off-by: Nicholas Bellinger <nab@xxxxxxxxxxxxxxx>
---
 drivers/target/target_core_transport.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 000bc6d..e825d58 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -754,15 +754,7 @@ void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status)
 
 void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int length)
 {
-	if (scsi_status != SAM_STAT_GOOD) {
-		return;
-	}
-
-	/*
-	 * Calculate new residual count based upon length of SCSI data
-	 * transferred.
-	 */
-	if (length < cmd->data_length) {
+	if (scsi_status == SAM_STAT_GOOD && length < cmd->data_length) {
 		if (cmd->se_cmd_flags & SCF_UNDERFLOW_BIT) {
 			cmd->residual_count += cmd->data_length - length;
 		} else {
@@ -771,12 +763,6 @@ void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int len
 		}
 
 		cmd->data_length = length;
-	} else if (length > cmd->data_length) {
-		cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
-		cmd->residual_count = length - cmd->data_length;
-	} else {
-		cmd->se_cmd_flags &= ~(SCF_OVERFLOW_BIT | SCF_UNDERFLOW_BIT);
-		cmd->residual_count = 0;
 	}
 
 	target_complete_cmd(cmd, scsi_status);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux