Add phy clock enable code to phy_power_on/off callbacks, and
remove explicit calls to enable these phy clocks from the
ufs-qcom hcd driver.
Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
Reviewed-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
---
drivers/phy/phy-qcom-ufs.c | 12 +++++++++++-
drivers/scsi/ufs/ufs-qcom.c | 15 ---------------
2 files changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index 3a87e88..687b9b7 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -681,11 +681,18 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
goto out_disable_phy;
}
+ err = ufs_qcom_phy_enable_iface_clk(generic_phy);
+ if (err) {
+ dev_err(dev, "%s enable phy iface clock failed, err=%d\n",
+ __func__, err);
+ goto out_disable_pll;
+ }
+
err = ufs_qcom_phy_enable_ref_clk(generic_phy);
if (err) {
dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
__func__, err);
- goto out_disable_pll;
+ goto out_disable_iface_clk;
}
/* enable device PHY ref_clk pad rail */
@@ -704,6 +711,8 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
out_disable_ref_clk:
ufs_qcom_phy_disable_ref_clk(generic_phy);
+out_disable_iface_clk:
+ ufs_qcom_phy_disable_iface_clk(generic_phy);
out_disable_pll:
ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll);
out_disable_phy:
@@ -723,6 +732,7 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
ufs_qcom_phy_disable_vreg(phy_common->dev,
&phy_common->vddp_ref_clk);
ufs_qcom_phy_disable_ref_clk(generic_phy);
+ ufs_qcom_phy_disable_iface_clk(generic_phy);
ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll);
ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy);
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 3aedf73..6e4ce5f 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1112,17 +1112,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
return 0;
if (on) {
- err = ufs_qcom_phy_enable_iface_clk(host->generic_phy);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_enable_ref_clk(host->generic_phy);
- if (err) {
- dev_err(hba->dev, "%s enable phy ref clock failed, err=%d\n",
- __func__, err);
- ufs_qcom_phy_disable_iface_clk(host->generic_phy);
- goto out;
- }
/* enable the device ref clock for HS mode*/
if (ufshcd_is_hs_mode(&hba->pwr_info))
ufs_qcom_dev_ref_clk_ctrl(host, true);
@@ -1131,9 +1120,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
ufs_qcom_update_bus_bw_vote(host);
} else {
-
- /* M-PHY RMMI interface clocks can be turned off */
- ufs_qcom_phy_disable_iface_clk(host->generic_phy);
if (!ufs_qcom_is_link_active(hba))
/* disable device ref_clk */
ufs_qcom_dev_ref_clk_ctrl(host, false);
@@ -1146,7 +1132,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
dev_err(hba->dev, "%s: set bus vote failed %d\n",
__func__, err);
-out:
return err;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
