Re: [PATCH 1/7] megaraid_sas: For SRIOV enabled firmware, ensure VF driver waits for 30secs before reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17.10.2016 12:24, Sumit Saxena wrote:
> For SRIOV enabled firmware, if there is a OCR(online controller reset)
> possibility driver set the convert flag to 1, which is not happening if
> there are outstanding commands even after 180 seconds.
> As driver does not set convert flag to 1 and still making the OCR to run,
> VF(Virtual function) driver is directly writing on to the register
> instead of waiting for 30 seconds. Setting convert flag to 1 will cause
> VF driver will wait for 30 secs before going for reset.
>
> CC: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Kiran Kumar Kasturi <kiran-kumar.kasturi@xxxxxxxxxxxx>
> Signed-off-by: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>

Reviewed-by: Tomas Henzl <thenzl@xxxxxxxxxx>

Tomas

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux