Move fibre channel event and reset handling to mptfc. This will
result in fewer changes over time that need to be applied to
either mptbase.c or mptscsih.c.
(Insertion point and insertion context changes.)
Signed-off-by: Michael Reed <mdr@xxxxxxx>
Move fibre channel event and reset handling to mptfc. This will
result in fewer changes over time that need to be applied to
either mptbase.c or mptscsih.c.
Signed-off-by: Michael Reed <mdr@xxxxxxx>
--- rc4u/drivers/message/fusion/mptbase.c 2006-05-18 16:43:51.288493225 -0500
+++ rc4/drivers/message/fusion/mptbase.c 2006-05-24 14:29:10.648402468 -0500
@@ -1188,7 +1188,6 @@
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
- spin_lock_init(&ioc->fc_rescan_work_lock);
spin_lock_init(&ioc->initializing_hba_lock);
/* Initialize the event logging.
@@ -1841,14 +1840,6 @@
mpt_findImVolumes(ioc);
} else if (ioc->bus_type == FC) {
- /*
- * Pre-fetch FC port WWN and stuff...
- * (FCPortPage0_t stuff)
- */
- for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) mptbase_GetFcPortPage0(ioc, ii);
- }
-
if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
(ioc->lan_cnfg_page0.Header.PageLength == 0)) {
/*
@@ -4174,108 +4165,6 @@
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * mptbase_GetFcPortPage0 - Fetch FCPort config Page0.
- * @ioc: Pointer to MPT_ADAPTER structure
- * @portnum: IOC Port number
- *
- * Return: 0 for success
- * -ENOMEM if no memory available
- * -EPERM if not allowed due to ISR context
- * -EAGAIN if no msg frames currently available
- * -EFAULT for non-successful reply or no reply (timeout)
- */
-int
-mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
-{
- ConfigPageHeader_t hdr;
- CONFIGPARMS cfg;
- FCPortPage0_t *ppage0_alloc;
- FCPortPage0_t *pp0dest;
- dma_addr_t page0_dma;
- int data_sz;
- int copy_sz;
- int rc;
- int count = 400;
-
-
- /* Get FCPort Page 0 header */
- hdr.PageVersion = 0;
- hdr.PageLength = 0;
- hdr.PageNumber = 0;
- hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
- cfg.cfghdr.hdr = &hdr;
- cfg.physAddr = -1;
- cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
- cfg.dir = 0;
- cfg.pageAddr = portnum;
- cfg.timeout = 0;
-
- if ((rc = mpt_config(ioc, &cfg)) != 0)
- return rc;
-
- if (hdr.PageLength == 0)
- return 0;
-
- data_sz = hdr.PageLength * 4;
- rc = -ENOMEM;
- ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
- if (ppage0_alloc) {
-
- try_again:
- memset((u8 *)ppage0_alloc, 0, data_sz);
- cfg.physAddr = page0_dma;
- cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
-
- if ((rc = mpt_config(ioc, &cfg)) == 0) {
- /* save the data */
- pp0dest = &ioc->fc_port_page0[portnum];
- copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
- memcpy(pp0dest, ppage0_alloc, copy_sz);
-
- /*
- * Normalize endianness of structure data,
- * by byte-swapping all > 1 byte fields!
- */
- pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
- pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
- pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
- pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
- pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
- pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
- pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
- pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
- pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
- pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
- pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
- pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
- pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
- pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
- pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
- pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
-
- /*
- * if still doing discovery,
- * hang loose a while until finished
- */
- if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
- if (count-- > 0) {
- msleep_interruptible(100);
- goto try_again;
- }
- printk(MYIOC_s_INFO_FMT "Firmware discovery not"
- " complete.\n",
- ioc->name);
- }
- }
-
- pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
- }
-
- return rc;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
* mptbase_sas_persist_operation - Perform operation on SAS Persitent Table
* @ioc: Pointer to MPT_ADAPTER structure
* @sas_address: 64bit SAS Address for operation.
@@ -6483,7 +6372,6 @@
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
-EXPORT_SYMBOL(mptbase_GetFcPortPage0);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
--- rc4u/drivers/message/fusion/mptbase.h 2006-05-24 13:53:15.314269272 -0500
+++ rc4/drivers/message/fusion/mptbase.h 2006-05-24 14:29:10.652402201 -0500
@@ -1027,7 +1027,6 @@
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
-extern int mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
/*
* Public data decl's...
--- rc4u/drivers/message/fusion/mptfc.c 2006-05-24 14:32:57.497599377 -0500
+++ rc4/drivers/message/fusion/mptfc.c 2006-05-24 14:31:55.884723175 -0500
@@ -596,6 +596,110 @@
return err;
}
+/*
+ * mptfc_GetFcPortPage0 - Fetch FCPort config Page0.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @portnum: IOC Port number
+ *
+ * Return: 0 for success
+ * -ENOMEM if no memory available
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ * -EINVAL portnum arg out of range (hardwired to two elements)
+ */
+static int
+mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ FCPortPage0_t *ppage0_alloc;
+ FCPortPage0_t *pp0dest;
+ dma_addr_t page0_dma;
+ int data_sz;
+ int copy_sz;
+ int rc;
+ int count = 400;
+
+ if (portnum > 1)
+ return -EINVAL;
+
+ /* Get FCPort Page 0 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = portnum;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return 0;
+
+ data_sz = hdr.PageLength * 4;
+ rc = -ENOMEM;
+ ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
+ if (ppage0_alloc) {
+
+ try_again:
+ memset((u8 *)ppage0_alloc, 0, data_sz);
+ cfg.physAddr = page0_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ /* save the data */
+ pp0dest = &ioc->fc_port_page0[portnum];
+ copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
+ memcpy(pp0dest, ppage0_alloc, copy_sz);
+
+ /*
+ * Normalize endianness of structure data,
+ * by byte-swapping all > 1 byte fields!
+ */
+ pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
+ pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
+ pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
+ pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
+ pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
+ pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
+ pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
+ pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
+ pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
+ pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
+ pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
+ pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
+ pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
+ pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
+ pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
+ pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
+
+ /*
+ * if still doing discovery,
+ * hang loose a while until finished
+ */
+ if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
+ if (count-- > 0) {
+ msleep_interruptible(100);
+ goto try_again;
+ }
+ printk(MYIOC_s_INFO_FMT "Firmware discovery not"
+ " complete.\n",
+ ioc->name);
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
+ }
+
+ return rc;
+}
+
static void
mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum)
{
@@ -659,7 +763,7 @@
* will reregister existing rports
*/
for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) mptbase_GetFcPortPage0(ioc, ii);
+ (void) mptfc_GetFcPortPage0(ioc, ii);
mptfc_init_host_attr(ioc,ii); /* refresh */
mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev);
}
@@ -762,6 +866,7 @@
goto out_mptfc_probe;
}
+ spin_lock_init(&ioc->fc_rescan_work_lock);
INIT_WORK(&ioc->fc_rescan_work, mptfc_rescan_devices,(void *)ioc);
spin_lock_irqsave(&ioc->FreeQlock, flags);
@@ -898,6 +1003,14 @@
goto out_mptfc_probe;
/*
+ * Pre-fetch FC port WWN and stuff...
+ * (FCPortPage0_t stuff)
+ */
+ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
+ (void) mptfc_GetFcPortPage0(ioc, ii);
+ }
+
+ /*
* scan for rports -
* by doing it via the workqueue, some locking is eliminated
*/
@@ -926,6 +1039,74 @@
#endif
};
+static int
+mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
+{
+ MPT_SCSI_HOST *hd;
+ u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
+ unsigned long flags;
+ int rc=1;
+
+ devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
+ ioc->name, event));
+
+ if (ioc->sh == NULL ||
+ ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
+ return 1;
+
+ switch (event) {
+ case MPI_EVENT_RESCAN:
+ spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+ if (ioc->fc_rescan_work_q) {
+ if (ioc->fc_rescan_work_count++ == 0) {
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
+ }
+ }
+ spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+ break;
+ default:
+ rc = mptscsih_event_process(ioc,pEvReply);
+ break;
+ }
+ return rc;
+}
+
+static int
+mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+ int rc;
+ unsigned long flags;
+
+ rc = mptscsih_ioc_reset(ioc,reset_phase);
+ if (rc == 0)
+ return rc;
+
+
+ dtmprintk((KERN_WARNING MYNAM
+ ": IOC %s_reset routed to FC host driver!\n",
+ reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
+ reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
+
+ if (reset_phase == MPT_IOC_SETUP_RESET) {
+ }
+
+ else if (reset_phase == MPT_IOC_PRE_RESET) {
+ }
+
+ else { /* MPT_IOC_POST_RESET */
+ spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+ if (ioc->fc_rescan_work_q) {
+ if (ioc->fc_rescan_work_count++ == 0) {
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
+ }
+ }
+ spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+ }
+ return 1;
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptfc_init - Register MPT adapter(s) as SCSI host(s) with
@@ -954,12 +1135,12 @@
mptfcTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTFC_DRIVER);
mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER);
- if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) {
+ if (mpt_event_register(mptfcDoneCtx, mptfc_event_process) == 0) {
devtverboseprintk((KERN_INFO MYNAM
": Registered for IOC event notifications\n"));
}
- if (mpt_reset_register(mptfcDoneCtx, mptscsih_ioc_reset) == 0) {
+ if (mpt_reset_register(mptfcDoneCtx, mptfc_ioc_reset) == 0) {
dprintk((KERN_INFO MYNAM
": Registered for IOC reset notifications\n"));
}
--- rc4u/drivers/message/fusion/mptscsih.c 2006-05-18 16:43:51.296492827 -0500
+++ rc4/drivers/message/fusion/mptscsih.c 2006-05-24 14:29:10.656401933 -0500
@@ -2521,18 +2521,6 @@
hd->cmdPtr = NULL;
}
- /* 7. FC: Rescan for blocked rports which might have returned.
- */
- if (ioc->bus_type == FC) {
- spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
- if (ioc->fc_rescan_work_q) {
- if (ioc->fc_rescan_work_count++ == 0) {
- queue_work(ioc->fc_rescan_work_q,
- &ioc->fc_rescan_work);
- }
- }
- spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
- }
dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
}
@@ -2546,7 +2534,6 @@
{
MPT_SCSI_HOST *hd;
u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
- unsigned long flags;
devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
ioc->name, event));
@@ -2569,14 +2556,6 @@
break;
case MPI_EVENT_RESCAN: /* 06 */
- spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
- if (ioc->fc_rescan_work_q) {
- if (ioc->fc_rescan_work_count++ == 0) {
- queue_work(ioc->fc_rescan_work_q,
- &ioc->fc_rescan_work);
- }
- }
- spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
break;
/*
