The fibre channel firmware provides a timer which is similar in purpose
to the fibre channel transport's device loss timer. The effect of this
timer is to extend the total time that a target will be missing beyond
the value associated with the transport's timer. This patch changes
the firmware timer to a default of one second which significantly reduces
the lag between when a target goes missing and the notification of the
fibre channel transport.
Signed-off-by: Michael Reed <mdr@xxxxxxx>
The fibre channel firmware provides a timer which is similar in purpose
to the fibre channel transport's device loss timer. The effect of this
timer is to extend the total time that a target will be missing beyond
the value associated with the transport's timer. This patch changes
the firmware timer to a default of one second which significantly reduces
the lag between when a target goes missing and the notification of the
fibre channel transport.
Signed-off-by: Michael Reed <mdr@xxxxxxx>
--- rc3c/drivers/message/fusion/mptbase.h 2006-05-08 14:41:20.330842216 -0500
+++ rc3/drivers/message/fusion/mptbase.h 2006-05-08 14:36:43.340659662 -0500
@@ -487,6 +487,15 @@
int isRaid; /* bit field, 1 if RAID */
}RaidCfgData;
+typedef struct _FcCfgData {
+ /* will ultimately hold fc_port_page0 also */
+ struct {
+ FCPortPage1_t *data;
+ dma_addr_t dma;
+ int pg_sz;
+ } fc_port_page1[2];
+} FcCfgData;
+
#define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01 /* rport registered */
#define MPT_RPORT_INFO_FLAGS_MISSING 0x02 /* missing from DevPage0 scan */
@@ -565,6 +574,7 @@
SpiCfgData spi_data; /* Scsi config. data */
RaidCfgData raid_data; /* Raid config. data */
SasCfgData sas_data; /* Sas config. data */
+ FcCfgData fc_data; /* Fc config. data */
MPT_IOCTL *ioctl; /* ioctl data pointer */
struct proc_dir_entry *ioc_dentry;
struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */
--- rc3c/drivers/message/fusion/mptfc.c 2006-05-08 14:41:20.330842216 -0500
+++ rc3/drivers/message/fusion/mptfc.c 2006-05-08 14:43:57.732490957 -0500
@@ -169,13 +169,6 @@
};
-/* FIXME! values controlling firmware RESCAN event
- * need to be set low to allow dev_loss_tmo to
- * work as expected. Currently, firmware doesn't
- * notify driver of RESCAN event until some number
- * of seconds elapse. This value can be set via
- * lsiutil.
- */
static void
mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
{
@@ -700,6 +693,153 @@
return rc;
}
+static int
+mptfc_WriteFcPortPage1(MPT_ADAPTER *ioc, int portnum)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ int rc;
+
+ if (portnum > 1)
+ return -EINVAL;
+
+ if (!(ioc->fc_data.fc_port_page1[portnum].data))
+ return -EINVAL;
+
+ /* get fcport page 1 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 1;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = portnum;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return -ENODEV;
+
+ if (hdr.PageLength*4 != ioc->fc_data.fc_port_page1[portnum].pg_sz)
+ return -EINVAL;
+
+ cfg.physAddr = ioc->fc_data.fc_port_page1[portnum].dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ cfg.dir = 1;
+
+ rc = mpt_config(ioc, &cfg);
+
+ return rc;
+}
+
+static int
+mptfc_GetFcPortPage1(MPT_ADAPTER *ioc, int portnum)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ FCPortPage1_t *page1_alloc;
+ dma_addr_t page1_dma;
+ int data_sz;
+ int rc;
+
+ if (portnum > 1)
+ return -EINVAL;
+
+ /* get fcport page 1 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 1;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = portnum;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return -ENODEV;
+
+start_over:
+
+ if (ioc->fc_data.fc_port_page1[portnum].data == NULL) {
+ data_sz = hdr.PageLength * 4;
+ if (data_sz < sizeof(FCPortPage1_t))
+ data_sz = sizeof(FCPortPage1_t);
+
+ page1_alloc = (FCPortPage1_t *) pci_alloc_consistent(ioc->pcidev,
+ data_sz,
+ &page1_dma);
+ if (!page1_alloc)
+ return -ENOMEM;
+ }
+ else {
+ page1_alloc = ioc->fc_data.fc_port_page1[portnum].data;
+ page1_dma = ioc->fc_data.fc_port_page1[portnum].dma;
+ data_sz = ioc->fc_data.fc_port_page1[portnum].pg_sz;
+ if (hdr.PageLength * 4 > data_sz) {
+ ioc->fc_data.fc_port_page1[portnum].data = NULL;
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *)
+ page1_alloc, page1_dma);
+ goto start_over;
+ }
+ }
+
+ memset(page1_alloc,0,data_sz);
+
+ cfg.physAddr = page1_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ ioc->fc_data.fc_port_page1[portnum].data = page1_alloc;
+ ioc->fc_data.fc_port_page1[portnum].pg_sz = data_sz;
+ ioc->fc_data.fc_port_page1[portnum].dma = page1_dma;
+ }
+ else {
+ ioc->fc_data.fc_port_page1[portnum].data = NULL;
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *)
+ page1_alloc, page1_dma);
+ }
+
+ return rc;
+}
+
+static void
+mptfc_SetFcPortPage1_defaults(MPT_ADAPTER *ioc)
+{
+ int ii;
+ FCPortPage1_t *pp1;
+
+ #define MPTFC_FW_DEVICE_TIMEOUT (1)
+ #define MPTFC_FW_IO_PEND_TIMEOUT (1)
+ #define ON_FLAGS (MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY)
+ #define OFF_FLAGS (MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS)
+
+ for (ii=0; ii<ioc->facts.NumberOfPorts; ii++) {
+ if (mptfc_GetFcPortPage1(ioc, ii) != 0)
+ continue;
+ pp1 = ioc->fc_data.fc_port_page1[ii].data;
+ if ((pp1->InitiatorDeviceTimeout == MPTFC_FW_DEVICE_TIMEOUT)
+ && (pp1->InitiatorIoPendTimeout == MPTFC_FW_IO_PEND_TIMEOUT)
+ && ((pp1->Flags & ON_FLAGS) == ON_FLAGS)
+ && ((pp1->Flags & OFF_FLAGS) == 0))
+ continue;
+ pp1->InitiatorDeviceTimeout = MPTFC_FW_DEVICE_TIMEOUT;
+ pp1->InitiatorIoPendTimeout = MPTFC_FW_IO_PEND_TIMEOUT;
+ pp1->Flags &= ~OFF_FLAGS;
+ pp1->Flags |= ON_FLAGS;
+ mptfc_WriteFcPortPage1(ioc, ii);
+ }
+}
+
+
static void
mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum)
{
@@ -1019,6 +1159,7 @@
for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
(void) mptfc_GetFcPortPage0(ioc, ii);
}
+ mptfc_SetFcPortPage1_defaults(ioc);
/*
* scan for rports -
@@ -1105,6 +1246,7 @@
}
else { /* MPT_IOC_POST_RESET */
+ mptfc_SetFcPortPage1_defaults(ioc);
spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
if (ioc->fc_rescan_work_q) {
if (ioc->fc_rescan_work_count++ == 0) {
@@ -1131,8 +1273,8 @@
show_mptmod_ver(my_NAME, my_VERSION);
- /* sanity check module parameter */
- if (mptfc_dev_loss_tmo == 0)
+ /* sanity check module parameters */
+ if (mptfc_dev_loss_tmo <= 0)
mptfc_dev_loss_tmo = MPTFC_DEV_LOSS_TMO;
mptfc_transport_template =
@@ -1175,6 +1317,7 @@
struct mptfc_rport_info *p, *n;
struct workqueue_struct *work_q;
unsigned long flags;
+ int ii;
/* destroy workqueue */
if ((work_q=ioc->fc_rescan_work_q)) {
@@ -1192,6 +1335,16 @@
kfree(p);
}
+ for (ii=0; ii<ioc->facts.NumberOfPorts; ii++) {
+ if (ioc->fc_data.fc_port_page1[ii].data) {
+ pci_free_consistent(ioc->pcidev,
+ ioc->fc_data.fc_port_page1[ii].pg_sz,
+ (u8 *) ioc->fc_data.fc_port_page1[ii].data,
+ ioc->fc_data.fc_port_page1[ii].dma);
+ ioc->fc_data.fc_port_page1[ii].data = NULL;
+ }
+ }
+
mptscsih_remove(pdev);
}
