Re: Bogus st failures from qla1280 timeouts?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>>>>> "Scott" == Bailey, Scott <scott.bailey@xxxxxxx> writes:

Scott> I've been worrying around the edges of this problem for months
Scott> without really feeling that I understand it but I have formed
Scott> enough suspicions to make this quasi-informed plea for
Scott> help... :-)

Scott> I manage an Alphaserver 4100/466 with 3 processors running
Scott> Debian testing/unstable (presently with kernel built from
Scott> Debian's linux-source-2.6.16-12 package). It is equipped with 3
Scott> KZPBA (single-ended) SCSI controllers, for which I use the
Scott> qla1280 driver with ISP1040 support enabled. (I was never so
Scott> happy as when this support was introduced and I could say
Scott> good-bye to kernel 2.4 and the sort-of-not-really-supported
Scott> Feral driver.)

Scott,

I think there are some problems with the 1040 support in general, at
least on Alpha as you're not the only one who have seen problems
there. Christoph did the 1020/1040 support so I am going to blame him
for it :) I have zero knowledge about those cards so there isn't much
I can do to help.

Regards,
Jes
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux