Re: [PATCH] make kernel ignore bogus partitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andries Brouwer wrote:
> On Wed, May 03, 2006 at 04:00:55PM -0500, Mike Miller (OS Dev) wrote:
> 
>>Patch 1/1
>>Sometimes partitions claim to be larger than the reported capacity of a
>>disk device. This patch makes the kernel ignore those partitions.
>>
>>Signed-off-by: Mike Miller <mike.miller@xxxxxx>
>>Signed-off-by: Stephen Cameron <steve.cameron@xxxxxx>
> 
> 
>>+		if (from+size-1 > get_capacity(disk)) {
>>+			printk(" %s: p%d exceeds device capacity, ignoring.\n", 
>>+				disk->disk_name, p);
>>+			continue;
>>+		}
> 
> 
> I debated for a while with myself whether I should like or dislike
> such a patch. On the one hand, this partition stuff is rather messy,
> and if you invent strict rules that partitions should satisfy then
> during the transition lots of people will be unhappy, but afterwards
> the stuff may be less messy.
> 
> On the other hand, such changes do indeed make people unhappy.
> Indeed, with this change one of my systems does not boot anymore.
> 
> There can be reasons, or there can have been reasons, for partitions
> larger than the disk. Maybe the disk has a jumper clipping the capacity
> while in other machines such a jumper is unnecessary, or while soon
> after booting the setmax utility is called to set the disk to full
> capacity again.
> Or, while doing forensics on a disk one copies the start to some
> other disk, and that other disk may be smaller.
> Etc.

Andries,
With the creative use of the MODE SELECT SCSI command
one can "short stroke" a disk, making subsequent READ
CAPACITY commands report less than is actually available.
READ and WRITE commands also would be crimped. For
example a 300 GB SCSI disk could be made to report
a capacity of 1 sector. [see sg_format in sg3_utils]

More practically RAID replacement disks may use this
facility if the firmware wants all disks the same
size and a smaller size disk (e.g. 18 GB SCSI disk) is
no longer available.

Without a product manual in which a manufacturer states
what the number of sectors should be, it may not be
obvious short stroking has occurred.


There are other situations I have come across, that can
be made to work if you know what is happening. When I
put a 160 GB PATA disk in an external USB enclosure that
doesn't support 48 bit lba, then I can't access anything
above the 137 (?) GB mark. By arranging my partitions
accordingly (e.g. 3 under, 1 over) the lower partitions
are still useable in the USB enclosure.

> So, it seems that Linux loses a little bit of its power when such things
> are made impossible.

Doug Gilbert
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux