Re: [PATCH] megaraid_sas: fix extended timeout handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 06, 2006 at 03:14:52PM +0100, Christoph Hellwig wrote:
> Replace the eh_timed_out method usage with setting sdev->timeout in
> slave_configure.  Also only use the extended timeout for raid volumes,
> physical devices shouldn't need it.
> 
> Applies ontop of the previous physical device attachment fix which
> introduces megasas_slave_configure.

Here's a resend against current mainline.  Note that scsi-misc is
missing the hidep physical disks patch so it needs another mainline
merge before this patch applies.


Signed-off-by: Christoph Hellwig <hch@xxxxxx>

Index: scsi-misc-2.6/drivers/scsi/megaraid/megaraid_sas.c
===================================================================
--- scsi-misc-2.6.orig/drivers/scsi/megaraid/megaraid_sas.c	2006-03-10 11:58:06.000000000 +0100
+++ scsi-misc-2.6/drivers/scsi/megaraid/megaraid_sas.c	2006-03-10 11:59:35.000000000 +0100
@@ -772,8 +772,6 @@
 		goto out_return_cmd;
 
 	cmd->scmd = scmd;
-	scmd->SCp.ptr = (char *)cmd;
-	scmd->SCp.sent_command = jiffies;
 
 	/*
 	 * Issue the command to the FW
@@ -804,6 +802,12 @@
 	 */
 	if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
 		return -ENXIO;
+
+	/*
+	 * The RAID firmware may require extended timeouts.
+	 */
+	if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
+		sdev->timeout = 90 * HZ;
 	return 0;
 }
 
@@ -875,23 +879,6 @@
 	return ret_val;
 }
 
-static enum scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
-{
-	unsigned long seconds;
-
-	if (scmd->SCp.ptr) {
-		seconds = (jiffies - scmd->SCp.sent_command) / HZ;
-
-		if (seconds < 90) {
-			return EH_RESET_TIMER;
-		} else {
-			return EH_NOT_HANDLED;
-		}
-	}
-
-	return EH_HANDLED;
-}
-
 /**
  * megasas_reset_device -	Device reset handler entry point
  */
@@ -962,7 +949,6 @@
 	.eh_device_reset_handler = megasas_reset_device,
 	.eh_bus_reset_handler = megasas_reset_bus_host,
 	.eh_host_reset_handler = megasas_reset_bus_host,
-	.eh_timed_out = megasas_reset_timer,
 	.use_clustering = ENABLE_CLUSTERING,
 };
 
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux