> -----Original Message----- > From: Grant Grundler [mailto:grundler@xxxxxxxxxxxxxxxx] > Sent: Saturday, February 25, 2006 10:24 AM > To: Miller, Mike (OS Dev) > Cc: Grundler, Grant G; Luck, Tony; Chris Wedgwood; Grant > Grundler; Greg KH; linux-kernel@xxxxxxxxxxxxxxx; > linux-scsi@xxxxxxxxxxxxxxx; linux-ia64@xxxxxxxxxxxxxxx; > linux-pci@xxxxxxxxxxxxxxxxxxxxxxxx; Jesse Barnes; Patterson, > Andrew D (Linux R&D) > Subject: Re: Problems with MSI-X on ia64 > > On Tue, Feb 21, 2006 at 02:21:42PM -0600, Miller, Mike (OS Dev) wrote: > > So I looked at 2.6.16-rc3 which works in my lab, but phys_addr is > > still an int. How can that work? > > "int" (u32) will work if the top bits are zero or alias to > the same thing as the full 64-bit address. > Can you apply the patch and add printk's to dump the > pci_resource_start(dev,bir) in msix_capability_init()? My box is in a vegetative state. Working with HW folks to resolve. mikem > > > > I believe Andrew saw the same thing in 2.6.15. > > Yes, AFIACT 2.6.15 has the same code. > > thanks, > grant > - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html