On Wed, 2006-02-22 at 18:39 +0100, Stephan Rattai wrote: > cat /sys/class/spi_transport/target1\:0\:1/min_period > 6.25 > > 2.6.16-rc3 ? Whatever causes this behaviour must have been introduced in > 2.6.14. The cat above is taken from 2.6.15.4. The output from 2.6.14 is the > same (as is the output from /proc/scsi/aic79xx/1), 2.6.16-rc4 dito. 2.6.13 > was working as expected. OK, I'm afraid this is a bit more serious than I thought. Apparently the aic7xxx code that pulls the settings out of the seeprom didn't get ported over to the aic79xx driver. Temporarily, to achive what you want, you can just do echo 12.5 > /sys/class/spi_transport/target1\:0\:1/min_period echo 1 > /sys/class/spi_transport/target1\:0\:1/revalidate and that should bring the speed down to U160. I'll see what it will take to get the seeprom functions ported, but they probably won't make 2.6.16. James - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
