Greg KH, We have the same results on 2.6.15, the MSI-X table is all zeroes. See below. Any ideas of what to do do next? The driver works on x86_64. Is there any thing extra I need to do on ia64? Andrew, can you try 2.6.16-rc1 and/or the rc1-git4 kernels? Thanks, mikem > -----Original Message----- > From: Patterson, Andrew D (Linux R&D) > Sent: Friday, January 27, 2006 6:13 PM > To: Miller, Mike (OS Dev) > Subject: MSI-X on 2.6.15 > > Mike, > > Here is what I get on 2.6.15. I may look familiar. > > Andrew > > HP CISS Driver (v 2.6.8) > GSI 45 (level, low) -> CPU 0 (0x0000) vector 52 > ACPI: PCI Interrupt 0000:46:01.0[A] -> GSI 45 (level, low) -> IRQ 52 > cciss: using DAC cycles > blocks= 143305920 block_size= 512 > heads= 255, sectors= 32, cylinders= 17562 > > blocks= 143305920 block_size= 512 > heads= 255, sectors= 32, cylinders= 17562 > > blocks= 71065440 block_size= 512 > heads= 255, sectors= 32, cylinders= 8709 > > blocks= 143305920 block_size= 512 > heads= 255, sectors= 32, cylinders= 17562 > > cciss/c0d0: p1 p2 p3 > blocks= 143305920 block_size= 512 > heads= 255, sectors= 32, cylinders= 17562 > > cciss/c0d1: p1 p2 p3 > blocks= 71065440 block_size= 512 > heads= 255, sectors= 32, cylinders= 8709 > > cciss/c0d2: p1 p2 p3 > GSI 63 (level, low) -> CPU 1 (0x0100) vector 53 > ACPI: PCI Interrupt 0000:4a:00.0[A] -> GSI 63 (level, low) -> IRQ 53 > cciss: offset = 0xfe000 table offset = 0xfe000 BIR = 0x0 > cciss: 0: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: 1: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: 2: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: 3: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: using DAC cycles > GSI 71 (level, low) -> CPU 2 (0x0200) vector 59 > ACPI: PCI Interrupt 0000:88:00.0[A] -> GSI 71 (level, low) -> IRQ 59 > cciss: offset = 0xfe000 table offset = 0xfe000 BIR = 0x0 > cciss: 0: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: 1: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: 2: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: 3: vector = 0,msg data = 0, msg upper addr = 0,msg addr = 0 > cciss: using DAC cycles > blocks= 143305920 block_size= 512 > heads= 255, sectors= 32, cylinders= 17562 > > - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
