Re: SCSI tape access on 2.6 kernels?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Denny Page schrieb:
> I agree.  In my case, the problem is also initial negation: 3 MB/s :-(.
> 
> Denny
> 

Could be, as I wrote earlier I don't know how to check this on a
Fusion or Megaraid chipset because all I have is
/sys/class/scsi_tape/nst0/device/scsi_level=4
                                /queue_depth=7
                                /queue_type=simple

The 53c8xx drivers are more verbose..

Actually I'm running a full backup (a few TB) on a generic 2.6.11.12
kernel with good performance (>30MB/s) on the LTO-3 tape library on
a 53c1030 controller. That's first priority. After that backup I will
play again with different kernel versions and the other tape library.

Sorry for that delay..

                                             GS
-- 
Gerhard Schneider
Institute of Lightweight Design and         e-Mail: gs@xxxxxxxxxxxxxxxxx
Structural Biomechanics (E317)                 Tel.:   +43 1 58801 31716
Vienna University of Technology / Austria      Fax:    +43 1 58801 31799
A-1040 Wien, Gusshausstrasse 27-29     http://www.ilsb.tuwien.ac.at/~gs/


Attachment: signature.asc
Description: OpenPGP digital signature


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux