Hi Mike,
is your problem still present in kernel 2.6.16-rc1?
cu
Adrian
On Wed, Nov 30, 2005 at 03:05:18PM +0100, m.gerth@xxxxxx wrote:
> Hello
> this is a repost since I have some new information for the Oops described
> below.
>
> System:
> 4P Opteron x86_64
> 24GB RAM
> LSI SCSI-megaraid controller 320-2X
> Vanilla kernel 2.6.14 oops
>
> Tested so far: (driver version is same in all kernels)
> 2.6.13 is ok. No Problems.
> 2.6.14 /w boot option mem=4G is also ok!
> 2.6.15-rc2 similiar to 2.6.14?
>
> -----------------------------------------------------------------------------------------------------------------------------------
> Hello,
>
> sorry for using this big list of recipients, but I'm not sure, who of you
> might be the one, who is most interested in the problem.
>
> I just booted vanilla 2.6.14 on a 4way Opteron (HP DL585) with 24GB RAM.
> Kernel was compiled with gcc 3.3.5.
> MegaRaid is compiled into kernel.
> While booting and initializing megaraid I get the Oops described in the
> following picture:
>
> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
> megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
> megaraid: probe new device 0x1000:0x0407:0x1000:0x0532: bus 6:slot
> 0:func 0
> GSI 17 sharing vector 0xB1 and IRQ 17
> ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 32 (level, low) -> IRQ
> 177
> megaraid: fw version:[414C] bios version:[H429]
> scsi0 : LSI Logic MegaRAID driver
> scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
> Unable to handle kernel NULL pointer dereference at
> 00000000000001cd RIP:
> PGD 0
> Oops: 0000 [1] SMP
> CPU 3
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.14 #13
> .....
>
>
> Tested so far: (driver version is same in all kernels)
> 2.6.13 is ok. No Problems.
> 2.6.14 /w boot option mem=4G is also ok!
> 2.6.15-rc2 similiar to 2.6.14?
>
> Output 2.6.15-rc2:::
> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
> megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
> megaraid: probe new device 0x1000:0x0407:0x1000:0x0532: bus 6:slot 0:func
> 0
> GSI 17 sharing vector 0xB1 and IRQ 17
> ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 32 (level, low) -> IRQ 177
> megaraid: fw version:[414C] bios version:[H429]
> scsi0 : LSI Logic MegaRAID driver
> scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
> Vendor: COMPAQ Model: PROLIANT 4L2I DT Rev: 1.86
> Type: Processor ANSI SCSI revision: 02
> scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
> scheduling while atomic: swapper/0x00000100/0
>
> Call Trace: <IRQ> <ffffffff8039153a>{schedule+122}
> <ffffffff80193e0f>{__d_lookup+159}
> <ffffffff80392e98>{__down+152}
> <ffffffff8012dee0>{default_wake_function+0}
> <ffffffff80392c8a>{__down_failed+53}
> <ffffffff802224d0>{kobject_release+0}
> <ffffffff802c8260>{.text.lock.main+25}
> <ffffffff802c2f0d>{device_del+93}
> <ffffffff802f82ce>{scsi_target_reap+142}
> <ffffffff802f9aa5>{scsi_device_dev_release+261}
> <ffffffff802c297c>{device_release+28}
> <ffffffff80222474>{kobject_cleanup+100}
> <ffffffff802224d0>{kobject_release+0}
> <ffffffff80222eb1>{kref_put+129}
> <ffffffff802f648f>{scsi_end_request+207}
> <ffffffff802f69ef>{scsi_io_completion+1039}
> <ffffffff802f1ba6>{scsi_finish_command+150}
> <ffffffff802f1abd>{scsi_softirq+333}
> <ffffffff801385eb>{__do_softirq+107}
> <ffffffff8010ef2b>{call_softirq+31}
> <ffffffff801107c1>{do_softirq+49} <ffffffff80110784>{do_IRQ+52}
> <ffffffff8010e14c>{ret_from_intr+0} <EOI>
> <ffffffff80391b60>{thread_return+0}
> <ffffffff8010bb1a>{default_idle+58} <ffffffff8010bd71>{cpu_idle+97}
>
> Vendor: COMPAQ Model: PROLIANT 4L2I DB Rev: 1.86
> Type: Processor ANSI SCSI revision: 02
> scsi[0]: scanning scsi channel 2 [virtual] for logical drives
> Vendor: MegaRAID Model: LD 0 RAID1 280G Rev: 414C
> Type: Direct-Access ANSI SCSI revision: 02
> Vendor: MegaRAID Model: LD 1 RAID1 280G Rev: 414C
> Type: Direct-Access ANSI SCSI revision: 02
> libata version 1.20 loaded.
> SCSI device sda: 573440000 512-byte hdwr sectors (293601 MB)
> sda: asking for cache data failed
> sda: assuming drive cache: write through
> SCSI device sda: 573440000 512-byte hdwr sectors (293601 MB)
> sda: asking for cache data failed
> sda: assuming drive cache: write through
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
> sd 0:2:0:0: Attached scsi disk sda
> SCSI device sdb: 573440000 512-byte hdwr sectors (293601 MB)
> sdb: asking for cache data failed
> sdb: assuming drive cache: write through
> SCSI device sdb: 573440000 512-byte hdwr sectors (293601 MB)
> sdb: asking for cache data failed
> sdb: assuming drive cache: write through
> sdb: sdb1 sdb2 sdb3
> sd 0:2:1:0: Attached scsi disk sdb
>
> Thank you for your help in advance,
> Regards,
> Mike Gerth
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
