Hi Adrian,
Adrian Bunk wrote:
On Mon, Nov 21, 2005 at 05:24:47PM +0100, José Luis Sánchez wrote:
Hi,
Hi José,
From 2.6.14 I have a nasty problem with my SCSI devices. First, see my HW:
----------------------------------
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26)
00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev
64)
00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
00:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev
06)
01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4200
AGP 8x] (rev a1)
------------------------
I'm using the ncr53c8xx SCSI driver. When I run K3b, the program stalls a few
minutes and this appears in the messages file:
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
sr 0:0:2:0: Attached scsi CD-ROM sr1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sr 0:0:2:0: Attached scsi generic sg2 type 5
0:0:5:0: Attached scsi generic sg3 type 1
sr 0:0:2:0: phase change 2-1 12@01bbcf60 resid=6.
sr 0:0:2:0: ABORT operation started.
sr 0:0:2:0: ABORT operation timed-out.
sr 0:0:2:0: DEVICE RESET operation started.
sr 0:0:2:0: DEVICE RESET operation timed-out.
sr 0:0:2:0: BUS RESET operation started.
sym0: SCSI BUS reset detected.
sym0: SCSI BUS has been reset.
sr 0:0:2:0: BUS RESET operation complete.
sr 0:0:2:0: phase change 2-1 12@01bbcf60 resid=6.
Device not ready. Make sure there is a disc in the drive.
Device not ready. Make sure there is a disc in the drive.
sr 0:0:2:0: phase change 2-1 12@01bbcf60 resid=6.
sr 0:0:2:0: phase change 2-3 12@01bbcf60 resid=2.
sr 0:0:2:0: phase change 2-3 12@01bbcf60 resid=2.
sr 0:0:2:0: phase change 2-3 12@01bbcf60 resid=2.
....
I'm very sure what the SCSI card, the cabling and the devices are OK, why
don't have any problem with 2.4.32 kernel.
Ideas?
is this problem still present in kernel 2.6.15?
Sadly, yes, exactly the same problem. I've changed the Tekram SCSI card
by an Adaptec AHA-2940UW and the problem continues. The error messages
are different, but the problem is the same.
Finally, I've changed the SCSI CD-ROMs by a IDE DVD-ROM.... :(
José Luis
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
