On Sun, 2006-01-01 at 16:41 -0800, bugme-daemon@xxxxxxxxxxxxxxxxxxx wrote: > Most recent kernel where this bug did not occur: 2.6.12.6 > Distribution: Debian 3.1r1 - Sarge Do you have the dmesg showing the domain validation commands for these, please? And also could you tell me what's in /sys/spi_transport/target<...>/min_period Thanks, James > Hardware Environment: Dell PowerEdge 4200/300 > > Software Environment: > ver_linux: > Linux GW 2.6.13 #1 SMP Sun Jan 1 21:13:01 CET 2006 i686 GNU/Linux > > Gnu C 3.3.5 > Gnu make 3.80 > binutils 2.15 > util-linux 2.12p > mount 2.12p > module-init-tools 3.2-pre1 > e2fsprogs 1.37 > jfsutils 1.1.7 > xfsprogs 2.6.20 > Linux C Library 2.3.2 > Dynamic linker (ldd) 2.3.2 > Procps 3.2.1 > Net-tools 1.60 > Console-tools 0.2.3 > Sh-utils 5.2.1 > Modules Loaded > > > proc/cpuinfo: > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 3 > model name : Pentium II (Klamath) > stepping : 4 > cpu MHz : 299.170 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov mmx > bogomips : 599.32 > > processor : 1 > vendor_id : GenuineIntel > cpu family : 6 > model : 3 > model name : Pentium II (Klamath) > stepping : 3 > cpu MHz : 299.170 > cache size : 512 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov mmx > bogomips : 598.36 > > > /proc/modules: > > > /proc/ioports: > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0070-0077 : rtc > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0330-0333 : i2c-pca-isa > 03c0-03df : vga+ > 0400-0407 : pnp 00:0f > 040a-040c : pnp 00:0f > 0410-043f : pnp 00:0f > 0461-0462 : pnp 00:0f > 0464-0465 : pnp 00:0f > 0481-048b : pnp 00:0f > 04c6-04c6 : pnp 00:0f > 0c80-0c83 : Dell System PowerEdge 4200 > 0cf8-0cff : PCI conf1 > e000-efff : PCI Bus #01 > e000-e0ff : 0000:01:0d.0 > e000-e0ff : 8139too > e400-e4ff : 0000:01:0b.0 > e800-e8ff : 0000:01:0a.0 > f4a0-f4bf : 0000:00:13.0 > f4a0-f4bf : ne2k-pci > f800-f8ff : 0000:00:14.0 > > > /proc/iomem: > 00000000-0009fbff : System RAM > 0009fc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000c0000-000c7fff : Video ROM > 000c8000-000cc7ff : Adapter ROM > 000f0000-000fffff : System ROM > 00100000-0fffffff : System RAM > 00100000-0049816c : Kernel code > 0049816d-005b31c7 : Kernel data > 10000000-100fffff : PCI Bus #01 > 10000000-1000ffff : 0000:01:0a.0 > 10100000-1010ffff : 0000:00:14.0 > 10110000-10113fff : 0000:00:13.0 > fc000000-fcffffff : 0000:00:14.0 > fde00000-fdffffff : PCI Bus #01 > fdefe000-fdefefff : 0000:01:0a.0 > fdefe000-fdefefff : aic7xxx > fdffe000-fdffefff : 0000:01:0b.0 > fdffe000-fdffefff : aic7xxx > fdfff800-fdfff8ff : 0000:01:0d.0 > fdfff800-fdfff8ff : 8139too > fec00000-fec00fff : reserved > fee00000-fee00fff : reserved > fff80000-ffffffff : reserved > > > lspci -vvv: > 0000:00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 32 > > 0000:00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02) > (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 255, Cache Line Size: 0x08 (32 bytes) > Bus: primary=00, secondary=01, subordinate=01, sec-latency=68 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fde00000-fdffffff > Prefetchable memory behind bridge: 0000000010000000-0000000010000000 > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 0000:00:0f.0 Non-VGA unclassified device: Intel Corp. 82375EB/SB PCI to EISA > Bridge (rev 15) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 248 > > 0000:00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at f4a0 [size=32] > Expansion ROM at 10110000 [disabled] [size=16K] > > 0000:00:14.0 VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT] > (rev 40) (prog-if 00 [VGA]) > Subsystem: ATI Technologies Inc Mach64VT Reference > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- > Stepping+ SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M] > Region 1: I/O ports at f800 [size=256] > Expansion ROM at 10100000 [disabled] [size=64K] > > 0000:01:0a.0 SCSI storage controller: Adaptec AIC-7880U > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (2000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes) > Interrupt: pin A routed to IRQ 15 > Region 0: I/O ports at e800 [disabled] [size=256] > Region 1: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at 10000000 [disabled] [size=64K] > > 0000:01:0b.0 SCSI storage controller: Adaptec AIC-7860 (rev 01) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 0x08 (32 bytes) > Interrupt: pin A routed to IRQ 15 > Region 0: I/O ports at e400 [disabled] [size=256] > Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=4K] > > 0000:01:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL- > 8139/8139C/8139C+ (rev 10) > Subsystem: Realtek Semiconductor Co., Ltd. RT8139 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at e000 [size=256] > Region 1: Memory at fdfff800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0- > ,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > /proc/scsi/scsi: > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: SEAGATE Model: ST34573LC Rev: 5702 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: SEAGATE Model: ST19171W Rev: 2219 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 02 Lun: 00 > Vendor: SEAGATE Model: ST19171W Rev: 2219 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 03 Lun: 00 > Vendor: SEAGATE Model: ST19171W Rev: 2224 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 04 Lun: 00 > Vendor: SEAGATE Model: ST39173LC Rev: 5702 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 05 Lun: 00 > Vendor: SEAGATE Model: ST19171W Rev: 2224 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 06 Lun: 00 > Vendor: DELL Model: 6UW BACKPLANE Rev: 7 > Type: Processor ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 05 Lun: 00 > Vendor: NEC Model: CD-ROM DRIVE:464 Rev: 1.05 > Type: CD-ROM > > > /proc/scsi/aic7xxx/0: > Adaptec AIC7xxx driver version: 6.2.36 > Adaptec aic7880 Ultra SCSI adapter > aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs > Allocated SCBs: 36, SG List Length: 128 > > Serial EEPROM: > 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 > 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 > 0x18b6 0x005e 0x2807 0x0010 0xff00 0xffff 0xffff 0xffff > 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0x74a1 > > Target 0 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Channel A Target 0 Lun 0 Settings > Commands Queued 1283 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 1 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Channel A Target 1 Lun 0 Settings > Commands Queued 46 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 2 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Channel A Target 2 Lun 0 Settings > Commands Queued 37 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 3 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Channel A Target 3 Lun 0 Settings > Commands Queued 36 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 4 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Channel A Target 4 Lun 0 Settings > Commands Queued 36 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 5 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) > Channel A Target 5 Lun 0 Settings > Commands Queued 45 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 6 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 3.300MB/s transfers > Curr: 3.300MB/s transfers > Channel A Target 6 Lun 0 Settings > Commands Queued 6 > Commands Active 0 > Command Openings 1 > Max Tagged Openings 0 > Device Queue Frozen Count 0 > Target 7 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 8 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 9 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 10 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 11 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 12 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 13 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 14 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 15 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > > > /proc/scsi/aic7xxx/1: > Adaptec AIC7xxx driver version: 6.2.36 > Adaptec aic7860 Ultra SCSI adapter > aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs > Allocated SCBs: 4, SG List Length: 128 > > Serial EEPROM: > 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 > 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 > 0x18b5 0x005e 0x2807 0x5008 0xff00 0xffff 0xffff 0xffff > 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0xc398 > > Target 0 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 1 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 2 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 3 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 4 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 5 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Goal: 10.000MB/s transfers (10.000MHz, offset 15) > Curr: 10.000MB/s transfers (10.000MHz, offset 15) > Channel A Target 5 Lun 0 Settings > Commands Queued 16 > Commands Active 0 > Command Openings 1 > Max Tagged Openings 0 > Device Queue Frozen Count 0 > Target 6 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 7 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > > > /proc/scsi/aic7xxx/0 - from kernel 2.6.12.6: > > Adaptec AIC7xxx driver version: 6.2.36 > Adaptec aic7880 Ultra SCSI adapter > aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs > Allocated SCBs: 8, SG List Length: 128 > > Serial EEPROM: > 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 > 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 > 0x18b6 0x005e 0x2807 0x0010 0xff00 0xffff 0xffff 0xffff > 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0x74a1 > > Target 0 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Channel A Target 0 Lun 0 Settings > Commands Queued 1459 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 1 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Channel A Target 1 Lun 0 Settings > Commands Queued 48 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 2 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Channel A Target 2 Lun 0 Settings > Commands Queued 38 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 3 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Channel A Target 3 Lun 0 Settings > Commands Queued 37 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 4 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Channel A Target 4 Lun 0 Settings > Commands Queued 37 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 5 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) > Channel A Target 5 Lun 0 Settings > Commands Queued 47 > Commands Active 0 > Command Openings 32 > Max Tagged Openings 32 > Device Queue Frozen Count 0 > Target 6 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Goal: 3.300MB/s transfers > Curr: 3.300MB/s transfers > Channel A Target 6 Lun 0 Settings > Commands Queued 6 > Commands Active 0 > Command Openings 1 > Max Tagged Openings 0 > Device Queue Frozen Count 0 > Target 7 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 8 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 9 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 10 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 11 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 12 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 13 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 14 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > Target 15 Negotiation Settings > User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit) > > > /proc/scsi/aic7xxx/1 - from kernel 2.6.12.6: > Adaptec AIC7xxx driver version: 6.2.36 > Adaptec aic7860 Ultra SCSI adapter > aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs > Allocated SCBs: 4, SG List Length: 128 > > Serial EEPROM: > 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 > 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 > 0x18b5 0x005e 0x2807 0x5008 0xff00 0xffff 0xffff 0xffff > 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0xc398 > > Target 0 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 1 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 2 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 3 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 4 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 5 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Goal: 20.000MB/s transfers (20.000MHz, offset 15) > Curr: 20.000MB/s transfers (20.000MHz, offset 15) > Channel A Target 5 Lun 0 Settings > Commands Queued 16 > Commands Active 0 > Command Openings 1 > Max Tagged Openings 0 > Device Queue Frozen Count 0 > Target 6 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > Target 7 Negotiation Settings > User: 20.000MB/s transfers (20.000MHz, offset 127) > > Problem Description: > If use kernel 2.6.13 or newer, all SCSI discs/cdrom work only on half > speed/frequency. > > Steps to reproduce: > Only boot... cat /proc/scsi/aic7xxx/0 - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
