[PATCH 1/6] aic7xxx: New device ids
Add new device id to aic7xxx and aic79xx.
---
drivers/scsi/aic7xxx/aic79xx_pci.c | 28 ++++++++++++++++++----------
drivers/scsi/aic7xxx/aic79xx_pci.h | 5 +++--
drivers/scsi/aic7xxx/aic7xxx_pci.c | 28 ++++++++++++++++++++++++----
drivers/scsi/aic7xxx/aic7xxx_pci.h | 1 +
4 files changed, 46 insertions(+), 16 deletions(-)
a7910fe6a5d4fc2dd85f06e973e2214b39cc4172
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c
b/drivers/scsi/aic7xxx/aic79xx_pci.c
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -2,7 +2,7 @@
* Product specific probe and attach routines for:
* aic7901 and aic7902 SCSI controllers
*
- * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 1994-2000 Justin T. Gibbs.
* Copyright (c) 2000-2002 Adaptec Inc.
* All rights reserved.
*
@@ -38,15 +38,15 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#77 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#89 $
*/
#ifdef __linux__
#include "aic79xx_osm.h"
#include "aic79xx_inline.h"
#else
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
#include <dev/aic7xxx/aic79xx_osm.h>
#include <dev/aic7xxx/aic79xx_inline.h>
#endif
@@ -114,6 +114,13 @@ struct ahd_pci_identity ahd_pci_ident_ta
"Adaptec 29320ALP Ultra320 SCSI adapter",
ahd_aic7901_setup
},
+ /* aic7901A based controllers */
+ {
+ ID_AHA_29320LP,
+ ID_ALL_MASK,
+ "Adaptec 29320LP Ultra320 SCSI adapter",
+ ahd_aic7901A_setup
+ },
/* aic7902 based controllers */
{
ID_AHA_29320,
@@ -128,12 +135,6 @@ struct ahd_pci_identity ahd_pci_ident_ta
ahd_aic7902_setup
},
{
- ID_AHA_29320LP,
- ID_ALL_MASK,
- "Adaptec 29320LP Ultra320 SCSI adapter",
- ahd_aic7901A_setup
- },
- {
ID_AHA_39320,
ID_ALL_MASK,
"Adaptec 39320 Ultra320 SCSI adapter",
@@ -146,6 +147,12 @@ struct ahd_pci_identity ahd_pci_ident_ta
ahd_aic7902_setup
},
{
+ ID_AHA_39320_B_DELL,
+ ID_ALL_MASK,
+ "Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
ID_AHA_39320A,
ID_ALL_MASK,
"Adaptec 39320A Ultra320 SCSI adapter",
@@ -668,6 +675,7 @@ ahd_configure_termination(struct ahd_sof
* Now set the termination based on what we found.
*/
sxfrctl1 = ahd_inb(ahd, SXFRCTL1) & ~STPWEN;
+ ahd->flags &= ~AHD_TERM_ENB_A;
if ((termctl & FLX_TERMCTL_ENPRILOW) != 0) {
ahd->flags |= AHD_TERM_ENB_A;
sxfrctl1 |= STPWEN;
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.h
b/drivers/scsi/aic7xxx/aic79xx_pci.h
--- a/drivers/scsi/aic7xxx/aic79xx_pci.h
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.h
@@ -53,14 +53,15 @@
#define ID_AHA_29320ALP 0x8017900500449005ull
#define ID_AIC7901A 0x801E9005FFFF9005ull
-#define ID_AHA_29320 0x8012900500429005ull
-#define ID_AHA_29320B 0x8013900500439005ull
#define ID_AHA_29320LP 0x8014900500449005ull
#define ID_AIC7902 0x801F9005FFFF9005ull
#define ID_AIC7902_B 0x801D9005FFFF9005ull
#define ID_AHA_39320 0x8010900500409005ull
+#define ID_AHA_29320 0x8012900500429005ull
+#define ID_AHA_29320B 0x8013900500439005ull
#define ID_AHA_39320_B 0x8015900500409005ull
+#define ID_AHA_39320_B_DELL 0x8015900501681028ull
#define ID_AHA_39320A 0x8016900500409005ull
#define ID_AHA_39320D 0x8011900500419005ull
#define ID_AHA_39320D_B 0x801C900500419005ull
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c
b/drivers/scsi/aic7xxx/aic7xxx_pci.c
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -3,7 +3,7 @@
* 3940, 2940, aic7895, aic7890, aic7880,
* aic7870, aic7860 and aic7850 SCSI controllers
*
- * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 1994-2000 Justin T. Gibbs.
* Copyright (c) 2000-2001 Adaptec Inc.
* All rights reserved.
*
@@ -39,9 +39,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#69 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#79 $
*/
#ifdef __linux__
@@ -49,6 +47,8 @@
#include "aic7xxx_inline.h"
#include "aic7xxx_93cx6.h"
#else
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
#include <dev/aic7xxx/aic7xxx_osm.h>
#include <dev/aic7xxx/aic7xxx_inline.h>
#include <dev/aic7xxx/aic7xxx_93cx6.h>
@@ -393,6 +393,12 @@ struct ahc_pci_identity ahc_pci_ident_ta
"Adaptec aic7892 Ultra160 SCSI adapter (ARO)",
ahc_aic7892_setup
},
+ {
+ ID_AHA_2915_30LP,
+ ID_ALL_MASK,
+ "Adaptec 2915/30LP Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
/* aic7895 based controllers */
{
ID_AHA_2940U_DUAL,
@@ -1193,9 +1199,19 @@ ahc_pci_test_register_access(struct ahc_
* use for this test.
*/
hcntrl = ahc_inb(ahc, HCNTRL);
+
if (hcntrl == 0xFF)
goto fail;
+ if ((hcntrl & CHIPRST) != 0) {
+ /*
+ * The chip has not been initialized since
+ * PCI/EISA/VLB bus reset. Don't trust
+ * "left over BIOS data".
+ */
+ ahc->flags |= AHC_NO_BIOS_INIT;
+ }
+
/*
* Next create a situation where write combining
* or read prefetching could be initiated by the
@@ -1307,6 +1323,10 @@ check_extport(struct ahc_softc *ahc, u_i
sd.sd_chip = C56_66;
}
ahc_release_seeprom(&sd);
+
+ /* Remember the SEEPROM type for later */
+ if (sd.sd_chip == C56_66)
+ ahc->flags |= AHC_LARGE_SEEPROM;
}
if (!have_seeprom) {
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.h
b/drivers/scsi/aic7xxx/aic7xxx_pci.h
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.h
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.h
@@ -105,6 +105,7 @@
#define ID_AHA_29160C 0x0080900562209005ull
#define ID_AHA_29160B 0x00809005E2209005ull
#define ID_AHA_19160B 0x0081900562A19005ull
+#define ID_AHA_2915_30LP 0x0082900502109005ull
#define ID_AIC7896 0x005F9005FFFF9005ull
#define ID_AIC7896_ARO 0x00539005FFFF9005ull
--
Dr. Hannes Reinecke hare@xxxxxxx
SuSE Linux Products GmbH S390 & zSeries
Maxfeldstraße 5 +49 911 74053 688
90409 Nürnberg http://www.suse.de
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
