drivers/scsi/g_NCR5380_mmio.c #define's SCSI_G_NCR5380_MEM, and
therefore drivers/scsi/g_NCR5380.{h,c} should check for this and not for
CONFIG_SCSI_G_NCR5380_MEM.
Signed-off-by: Adrian Bunk <bunk@xxxxxxxxx>
---
drivers/scsi/g_NCR5380.c | 24 ++++++++++++------------
drivers/scsi/g_NCR5380.h | 4 ++--
2 files changed, 14 insertions(+), 14 deletions(-)
--- linux-2.6.15-rc5-mm2-full/drivers/scsi/g_NCR5380.h.old 2005-12-12 01:39:09.000000000 +0100
+++ linux-2.6.15-rc5-mm2-full/drivers/scsi/g_NCR5380.h 2005-12-12 01:39:26.000000000 +0100
@@ -64,7 +64,7 @@
#define __STRVAL(x) #x
#define STRVAL(x) __STRVAL(x)
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
#define NCR5380_map_config port
#define NCR5380_map_type int
@@ -83,7 +83,7 @@
#define NCR5380_write(reg, value) (outb((value), (NCR5380_map_name + (reg))))
#else
-/* therefore CONFIG_SCSI_G_NCR5380_MEM */
+/* therefore SCSI_G_NCR5380_MEM */
#define NCR5380_map_config memory
#define NCR5380_map_type unsigned long
--- linux-2.6.15-rc5-mm2-full/drivers/scsi/g_NCR5380.c.old 2005-12-12 01:39:35.000000000 +0100
+++ linux-2.6.15-rc5-mm2-full/drivers/scsi/g_NCR5380.c 2005-12-12 01:39:41.000000000 +0100
@@ -373,7 +373,7 @@
break;
}
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
if (ports) {
/* wakeup sequence for the NCR53C400A and DTC3181E */
@@ -429,7 +429,7 @@
#endif
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
if (instance == NULL) {
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
release_region(overrides[current_override].NCR5380_map_name, region_size);
#else
release_mem_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size);
@@ -438,7 +438,7 @@
}
instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
instance->n_io_port = region_size;
#endif
@@ -506,7 +506,7 @@
free_irq(instance->irq, NULL);
NCR5380_exit(instance);
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
release_region(instance->NCR5380_instance_name, instance->n_io_port);
#else
release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
@@ -578,14 +578,14 @@
}
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
int i;
for (i = 0; i < 128; i++)
dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
isa_memcpy_fromio(dst + start, NCR53C400_host_buffer + NCR5380_map_name, 128);
#endif
start += 128;
@@ -598,14 +598,14 @@
// FIXME - no timeout
}
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
int i;
for (i = 0; i < 128; i++)
dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
isa_memcpy_fromio(dst + start, NCR53C400_host_buffer + NCR5380_map_name, 128);
#endif
start += 128;
@@ -664,13 +664,13 @@
}
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - timeout
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
for (i = 0; i < 128; i++)
NCR5380_write(C400_HOST_BUFFER, src[start + i]);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
isa_memcpy_toio(NCR53C400_host_buffer + NCR5380_map_name, src + start, 128);
#endif
start += 128;
@@ -680,13 +680,13 @@
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - no timeout
-#ifndef CONFIG_SCSI_G_NCR5380_MEM
+#ifndef SCSI_G_NCR5380_MEM
{
for (i = 0; i < 128; i++)
NCR5380_write(C400_HOST_BUFFER, src[start + i]);
}
#else
- /* implies CONFIG_SCSI_G_NCR5380_MEM */
+ /* implies SCSI_G_NCR5380_MEM */
isa_memcpy_toio(NCR53C400_host_buffer + NCR5380_map_name, src + start, 128);
#endif
start += 128;
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
