Andrew Vasquez wrote: > >> From: Michael Reed [mailto:mdr@xxxxxxx] >> > > Sidenote: I'm on the east-coast until hopefully tonight -- won't > have a chance to look at debugging this for a couple of days... > >> I've been testing with the qla2300 driver with 2.6.14.3 and 2.6.15-rc4. >> I've observed two sets of error messages which are not present with >> 2.6.14.3. >> >> First, the qla2300 driver is generating soft lockups. > > Have a backtrace? In the previously attached dmesg file, extracted below. Is the driver polling for mailbox interrupt? QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0002:01:04.0[A]: no GSI qla2300 0002:01:04.0: Found an ISP2312, irq 74, iobase 0xc00000080fd00000 qla2300 0002:01:04.0: Configuring PCI space... PCI: slot 0002:01:04.0 has incorrect PCI cache line size of 0 bytes, correcting to 128 qla2300 0002:01:04.0: Configure NVRAM parameters... qla2300 0002:01:04.0: Verifying loaded RISC code... qla2300 0002:01:04.0: Waiting for LIP to complete... qla2300 0002:01:04.0: LIP reset occured (f800). qla2300 0002:01:04.0: LOOP UP detected (2 Gbps). qla2300 0002:01:04.0: Topology - (F_Port), Host Loop address 0xffff BUG: soft lockup detected on CPU#0! Modules linked in: Pid: 1, CPU 0, comm: swapper psr : 00001010081a6018 ifs : 8000000000000a98 ip : [<a000000100580380>] Not tainted ip is at qla2x00_mailbox_command+0x860/0xc40 unat: 0000000000000000 pfs : 0000000000000a98 rsc : 0000000000000003 rnat: aaaaa665556a9a55 bsps: a000000100589470 pr : aaaaa655556a5555 ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f csd : 0000000000000000 ssd : 0000000000000000 b0 : a0000001005802f0 b6 : e0000030023e5490 b7 : a000000100589260 f6 : 0fff6fffffffff0000000 f7 : 1003e0000000000002710 f8 : 1003e00000000000003e8 f9 : 100078000000000000000 f10 : 10000bffffffff4000000 f11 : 1003e0000000000000003 r1 : a000000100c5a350 r2 : 0000000000000001 r3 : e00000b07bb20db0 r8 : 0000000000000001 r9 : 0000000000004000 r10 : 0000000000000000 r11 : 0000000000000002 r12 : e00000b07bb27af0 r13 : e00000b07bb20000 r14 : 0000000000000012 r15 : 0000000000002710 r16 : 0000000c610edd5d r17 : 0000000000000001 r18 : 0000000000000002 r19 : 0000000000000000 r20 : 0000000000000000 r21 : ffffffffffff0028 r22 : e000003003104234 r23 : e000003003104231 r24 : e0000034f79183f8 r25 : 000000000000000d r26 : 0000000c610edd6a r27 : 00000000000003e8 r28 : a0000001007b8ec0 r29 : 00000000000001fb r30 : 0000000c610edf7e r31 : a000000100a5aa58 Call Trace: [<a000000100013760>] show_stack+0x80/0xa0 sp=e00000b07bb27730 bsp=e00000b07bb21788 [<a000000100013fd0>] show_regs+0x850/0x880 sp=e00000b07bb27900 bsp=e00000b07bb21728 [<a000000100104600>] softlockup_tick+0x160/0x180 sp=e00000b07bb27910 bsp=e00000b07bb216f8 [<a0000001000cb0c0>] do_timer+0x6a0/0x9a0 sp=e00000b07bb27920 bsp=e00000b07bb21688 [<a000000100037100>] timer_interrupt+0x260/0x3e0 sp=e00000b07bb27920 bsp=e00000b07bb21638 [<a0000001001047b0>] handle_IRQ_event+0x90/0x120 sp=e00000b07bb27920 bsp=e00000b07bb215f0 [<a000000100104930>] __do_IRQ+0xf0/0x360 sp=e00000b07bb27920 bsp=e00000b07bb21598 [<a000000100010400>] ia64_handle_irq+0xc0/0x160 sp=e00000b07bb27920 bsp=e00000b07bb21558 [<a00000010000bce0>] ia64_leave_kernel+0x0/0x290 sp=e00000b07bb27920 bsp=e00000b07bb21558 [<a000000100580380>] qla2x00_mailbox_command+0x860/0xc40 sp=e00000b07bb27af0 bsp=e00000b07bb21498 [<a000000100581070>] qla2x00_login_fabric+0x150/0x260 sp=e00000b07bb27b40 bsp=e00000b07bb21440 [<a000000100575580>] qla2x00_fabric_login+0xc0/0x3a0 sp=e00000b07bb27ba0 bsp=e00000b07bb21388 [<a0000001005761f0>] qla2x00_fabric_dev_login+0x30/0x180 sp=e00000b07bb27be0 bsp=e00000b07bb21358 [<a000000100578ac0>] qla2x00_configure_loop+0x2280/0x2a80 sp=e00000b07bb27be0 bsp=e00000b07bb21258 [<a00000010057a320>] qla2x00_initialize_adapter+0x440/0x6c0 sp=e00000b07bb27ca0 bsp=e00000b07bb211c8 [<a00000010056f4e0>] qla2x00_probe_one+0x1200/0x1fc0 sp=e00000b07bb27ca0 bsp=e00000b07bb21078 [<a0000001005a15f0>] qla2300_probe_one+0x30/0x60 sp=e00000b07bb27d50 bsp=e00000b07bb21050 [<a000000100420c70>] pci_device_probe+0x2d0/0x4a0 sp=e00000b07bb27d50 bsp=e00000b07bb21008 [<a0000001004d05d0>] driver_probe_device+0xb0/0x1a0 sp=e00000b07bb27da0 bsp=e00000b07bb20fc8 [<a0000001004d0730>] __driver_attach+0x70/0xc0 sp=e00000b07bb27da0 bsp=e00000b07bb20f98 [<a0000001004cf880>] bus_for_each_dev+0xc0/0x140 sp=e00000b07bb27da0 bsp=e00000b07bb20f58 [<a0000001004d02b0>] driver_attach+0x30/0x60 sp=e00000b07bb27dc0 bsp=e00000b07bb20f38 [<a0000001004cec70>] bus_add_driver+0xf0/0x300 sp=e00000b07bb27dc0 bsp=e00000b07bb20ef8 [<a0000001004d0940>] driver_register+0xa0/0xc0 sp=e00000b07bb27dc0 bsp=e00000b07bb20ed8 [<a000000100420640>] __pci_register_driver+0x140/0x1e0 sp=e00000b07bb27dd0 bsp=e00000b07bb20ea8 [<a000000100870fd0>] qla2300_init+0x30/0x60 sp=e00000b07bb27de0 bsp=e00000b07bb20e90 [<a000000100009730>] init+0x470/0x920 sp=e00000b07bb27de0 bsp=e00000b07bb20e28 [<a0000001000119e0>] kernel_thread_helper+0xe0/0x100 sp=e00000b07bb27e30 bsp=e00000b07bb20e00 [<a000000100009120>] start_kernel_thread+0x20/0x40 sp=e00000b07bb27e30 bsp=e00000b07bb20e00 - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
