The upper layer doesn't send these down since 2.4.x (or 2.6 in
practice), so no need to handle it. Inline sym_setup_data_pointers
into its only caller so we can fail gracefully in the case we'd get
one neverless.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Matthew Wilcox <matthew@xxxxxx>
---
drivers/scsi/sym53c8xx_2/sym_fw.c | 6 ---
drivers/scsi/sym53c8xx_2/sym_fw.h | 6 ---
drivers/scsi/sym53c8xx_2/sym_fw1.h | 48 --------------------
drivers/scsi/sym53c8xx_2/sym_fw2.h | 52 ----------------------
drivers/scsi/sym53c8xx_2/sym_glue.c | 39 +++++++++++++++-
drivers/scsi/sym53c8xx_2/sym_glue.h | 1
drivers/scsi/sym53c8xx_2/sym_hipd.c | 8 ++-
drivers/scsi/sym53c8xx_2/sym_hipd.h | 84 -----------------------------------
8 files changed, 40 insertions(+), 204 deletions(-)
applies-to: e1b800876a9da29e28cbdce5d11db7884d50542c
15a1cca64aced042ec913e4cf00c7cbad661820b
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c
index a7528a8..9916a2a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw.c
+++ b/drivers/scsi/sym53c8xx_2/sym_fw.c
@@ -62,9 +62,6 @@ static struct sym_fwa_ofs sym_fw1a_ofs =
};
static struct sym_fwb_ofs sym_fw1b_ofs = {
SYM_GEN_FW_B(struct SYM_FWB_SCR)
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- SYM_GEN_B(struct SYM_FWB_SCR, data_io)
-#endif
};
static struct sym_fwz_ofs sym_fw1z_ofs = {
SYM_GEN_FW_Z(struct SYM_FWZ_SCR)
@@ -86,9 +83,6 @@ static struct sym_fwa_ofs sym_fw2a_ofs =
};
static struct sym_fwb_ofs sym_fw2b_ofs = {
SYM_GEN_FW_B(struct SYM_FWB_SCR)
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- SYM_GEN_B(struct SYM_FWB_SCR, data_io)
-#endif
SYM_GEN_B(struct SYM_FWB_SCR, start64)
SYM_GEN_B(struct SYM_FWB_SCR, pm_handle)
};
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.h b/drivers/scsi/sym53c8xx_2/sym_fw.h
index 43f6810..66ec35b 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw.h
@@ -92,9 +92,6 @@ struct sym_fwa_ofs {
};
struct sym_fwb_ofs {
SYM_GEN_FW_B(u_short)
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- SYM_GEN_B(u_short, data_io)
-#endif
SYM_GEN_B(u_short, start64)
SYM_GEN_B(u_short, pm_handle)
};
@@ -111,9 +108,6 @@ struct sym_fwa_ba {
};
struct sym_fwb_ba {
SYM_GEN_FW_B(u32)
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- SYM_GEN_B(u32, data_io)
-#endif
SYM_GEN_B(u32, start64);
SYM_GEN_B(u32, pm_handle);
};
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h
index cdd92d8..7b39f4a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw1.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h
@@ -197,12 +197,6 @@ struct SYM_FWB_SCR {
u32 bad_status [ 7];
u32 wsr_ma_helper [ 4];
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- /* Unknown direction handling */
- u32 data_io [ 2];
- u32 data_io_com [ 8];
- u32 data_io_out [ 7];
-#endif
/* Data area */
u32 zero [ 1];
u32 scratch [ 1];
@@ -1747,48 +1741,6 @@ static struct SYM_FWB_SCR SYM_FWB_SCR =
SCR_JUMP,
PADDR_A (dispatch),
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
-}/*-------------------------< DATA_IO >--------------------------*/,{
- /*
- * We jump here if the data direction was unknown at the
- * time we had to queue the command to the scripts processor.
- * Pointers had been set as follow in this situation:
- * savep --> DATA_IO
- * lastp --> start pointer when DATA_IN
- * wlastp --> start pointer when DATA_OUT
- * This script sets savep and lastp according to the
- * direction chosen by the target.
- */
- SCR_JUMP ^ IFTRUE (WHEN (SCR_DATA_OUT)),
- PADDR_B (data_io_out),
-}/*-------------------------< DATA_IO_COM >----------------------*/,{
- /*
- * Direction is DATA IN.
- */
- SCR_COPY (4),
- HADDR_1 (ccb_head.lastp),
- HADDR_1 (ccb_head.savep),
- /*
- * Jump to the SCRIPTS according to actual direction.
- */
- SCR_COPY (4),
- HADDR_1 (ccb_head.savep),
- RADDR_1 (temp),
- SCR_RETURN,
- 0,
-}/*-------------------------< DATA_IO_OUT >----------------------*/,{
- /*
- * Direction is DATA OUT.
- */
- SCR_REG_REG (HF_REG, SCR_AND, (~HF_DATA_IN)),
- 0,
- SCR_COPY (4),
- HADDR_1 (ccb_head.wlastp),
- HADDR_1 (ccb_head.lastp),
- SCR_JUMP,
- PADDR_B(data_io_com),
-#endif /* SYM_OPT_HANDLE_DIR_UNKNOWN */
-
}/*-------------------------< ZERO >-----------------------------*/,{
SCR_DATA_ZERO,
}/*-------------------------< SCRATCH >--------------------------*/,{
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h
index 7ea7151..851f270 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw2.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h
@@ -191,13 +191,6 @@ struct SYM_FWB_SCR {
u32 pm_wsr_handle [ 38];
u32 wsr_ma_helper [ 4];
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- /* Unknown direction handling */
- u32 data_io [ 2];
- u32 data_io_in [ 2];
- u32 data_io_com [ 6];
- u32 data_io_out [ 8];
-#endif
/* Data area */
u32 zero [ 1];
u32 scratch [ 1];
@@ -1838,51 +1831,6 @@ static struct SYM_FWB_SCR SYM_FWB_SCR =
SCR_JUMP,
PADDR_A (dispatch),
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
-}/*-------------------------< DATA_IO >--------------------------*/,{
- /*
- * We jump here if the data direction was unknown at the
- * time we had to queue the command to the scripts processor.
- * Pointers had been set as follow in this situation:
- * savep --> DATA_IO
- * lastp --> start pointer when DATA_IN
- * wlastp --> start pointer when DATA_OUT
- * This script sets savep and lastp according to the
- * direction chosen by the target.
- */
- SCR_JUMP ^ IFTRUE (WHEN (SCR_DATA_OUT)),
- PADDR_B (data_io_out),
-}/*-------------------------< DATA_IO_IN >-----------------------*/,{
- /*
- * Direction is DATA IN.
- */
- SCR_LOAD_REL (scratcha, 4),
- offsetof (struct sym_ccb, phys.head.lastp),
-}/*-------------------------< DATA_IO_COM >----------------------*/,{
- SCR_STORE_REL (scratcha, 4),
- offsetof (struct sym_ccb, phys.head.savep),
-
- /*
- * Jump to the SCRIPTS according to actual direction.
- */
- SCR_LOAD_REL (temp, 4),
- offsetof (struct sym_ccb, phys.head.savep),
- SCR_RETURN,
- 0,
-}/*-------------------------< DATA_IO_OUT >----------------------*/,{
- /*
- * Direction is DATA OUT.
- */
- SCR_REG_REG (HF_REG, SCR_AND, (~HF_DATA_IN)),
- 0,
- SCR_LOAD_REL (scratcha, 4),
- offsetof (struct sym_ccb, phys.head.wlastp),
- SCR_STORE_REL (scratcha, 4),
- offsetof (struct sym_ccb, phys.head.lastp),
- SCR_JUMP,
- PADDR_B(data_io_com),
-#endif /* SYM_OPT_HANDLE_DIR_UNKNOWN */
-
}/*-------------------------< ZERO >-----------------------------*/,{
SCR_DATA_ZERO,
}/*-------------------------< SCRATCH >--------------------------*/,{
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 60beee2..b39151f 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -514,9 +514,10 @@ static inline int sym_setup_cdb(struct s
*/
int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
{
- int dir;
struct sym_tcb *tp = &np->target[cp->target];
struct sym_lcb *lp = sym_lp(tp, cp->lun);
+ u32 lastp, goalp;
+ int dir;
/*
* Build the CDB.
@@ -534,15 +535,47 @@ int sym_setup_data_and_start(struct sym_
sym_set_cam_status(cmd, DID_ERROR);
goto out_abort;
}
+
+ /*
+ * No segments means no data.
+ */
+ if (!cp->segments)
+ dir = DMA_NONE;
} else {
cp->data_len = 0;
cp->segments = 0;
}
/*
- * Set data pointers.
+ * Set the data pointer.
+ */
+ switch (dir) {
+ case DMA_BIDIRECTIONAL:
+ printk("%s: got DMA_BIDIRECTIONAL command", sym_name(np));
+ sym_set_cam_status(cmd, DID_ERROR);
+ goto out_abort;
+ case DMA_TO_DEVICE:
+ goalp = SCRIPTA_BA(np, data_out2) + 8;
+ lastp = goalp - 8 - (cp->segments * (2*4));
+ break;
+ case DMA_FROM_DEVICE:
+ cp->host_flags |= HF_DATA_IN;
+ goalp = SCRIPTA_BA(np, data_in2) + 8;
+ lastp = goalp - 8 - (cp->segments * (2*4));
+ break;
+ case DMA_NONE:
+ default:
+ lastp = goalp = SCRIPTB_BA(np, no_data);
+ break;
+ }
+
+ /*
+ * Set all pointers values needed by SCRIPTS.
*/
- sym_setup_data_pointers(np, cp, dir);
+ cp->phys.head.lastp = cpu_to_scr(lastp);
+ cp->phys.head.savep = cpu_to_scr(lastp);
+ cp->startp = cp->phys.head.savep;
+ cp->goalp = cpu_to_scr(goalp);
/*
* When `#ifed 1', the code below makes the driver
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h
index c61c23f..cc92d0c 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.h
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.h
@@ -68,7 +68,6 @@
*/
#define SYM_CONF_TIMER_INTERVAL ((HZ+1)/2)
-#define SYM_OPT_HANDLE_DIR_UNKNOWN
#define SYM_OPT_HANDLE_DEVICE_QUEUEING
#define SYM_OPT_LIMIT_COMMAND_REORDERING
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index bec6448..b4f0d9a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -3654,7 +3654,7 @@ static int sym_evaluate_dp(struct sym_hc
* If result is dp_sg = SYM_CONF_MAX_SG, then we are at the
* end of the data.
*/
- tmp = scr_to_cpu(sym_goalp(cp));
+ tmp = scr_to_cpu(cp->goalp);
dp_sg = SYM_CONF_MAX_SG;
if (dp_scr != tmp)
dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4);
@@ -3761,7 +3761,7 @@ static void sym_modify_dp(struct sym_hcb
* And our alchemy:) allows to easily calculate the data
* script address we want to return for the next data phase.
*/
- dp_ret = cpu_to_scr(sym_goalp(cp));
+ dp_ret = cpu_to_scr(cp->goalp);
dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4);
/*
@@ -3857,7 +3857,7 @@ int sym_compute_residual(struct sym_hcb
* If all data has been transferred,
* there is no residual.
*/
- if (cp->phys.head.lastp == sym_goalp(cp))
+ if (cp->phys.head.lastp == cp->goalp)
return resid;
/*
@@ -5470,7 +5470,7 @@ void sym_complete_ok (struct sym_hcb *np
* extended error did occur, there is no residual.
*/
resid = 0;
- if (cp->phys.head.lastp != sym_goalp(cp))
+ if (cp->phys.head.lastp != cp->goalp)
resid = sym_compute_residual(np, cp);
/*
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 7560088..1718110 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -48,12 +48,6 @@
* They may be defined in platform specific headers, if they
* are useful.
*
- * SYM_OPT_HANDLE_DIR_UNKNOWN
- * When this option is set, the SCRIPTS used by the driver
- * are able to handle SCSI transfers with direction not
- * supplied by user.
- * (set for Linux-2.0.X)
- *
* SYM_OPT_HANDLE_DEVICE_QUEUEING
* When this option is set, the driver will use a queue per
* device and handle QUEUE FULL status requeuing internally.
@@ -64,7 +58,6 @@
* (set for Linux)
*/
#if 0
-#define SYM_OPT_HANDLE_DIR_UNKNOWN
#define SYM_OPT_HANDLE_DEVICE_QUEUEING
#define SYM_OPT_LIMIT_COMMAND_REORDERING
#endif
@@ -659,9 +652,6 @@ struct sym_ccbh {
*/
u32 savep; /* Jump address to saved data pointer */
u32 lastp; /* SCRIPTS address at end of data */
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- u32 wlastp;
-#endif
/*
* Status fields.
@@ -791,9 +781,6 @@ struct sym_ccb {
SYM_QUEHEAD link_ccbq; /* Link to free/busy CCB queue */
u32 startp; /* Initial data pointer */
u32 goalp; /* Expected last data pointer */
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- u32 wgoalp;
-#endif
int ext_sg; /* Extreme data pointer, used */
int ext_ofs; /* to calculate the residual. */
#ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
@@ -808,12 +795,6 @@ struct sym_ccb {
#define CCB_BA(cp,lbl) cpu_to_scr(cp->ccb_ba + offsetof(struct sym_ccb, lbl))
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
-#define sym_goalp(cp) ((cp->host_flags & HF_DATA_IN) ? cp->goalp : cp->wgoalp)
-#else
-#define sym_goalp(cp) (cp->goalp)
-#endif
-
typedef struct device *m_pool_ident_t;
/*
@@ -1122,71 +1103,6 @@ bad:
#endif
/*
- * Set up data pointers used by SCRIPTS.
- * Called from O/S specific code.
- */
-static inline void sym_setup_data_pointers(struct sym_hcb *np,
- struct sym_ccb *cp, int dir)
-{
- u32 lastp, goalp;
-
- /*
- * No segments means no data.
- */
- if (!cp->segments)
- dir = DMA_NONE;
-
- /*
- * Set the data pointer.
- */
- switch(dir) {
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- case DMA_BIDIRECTIONAL:
-#endif
- case DMA_TO_DEVICE:
- goalp = SCRIPTA_BA(np, data_out2) + 8;
- lastp = goalp - 8 - (cp->segments * (2*4));
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- cp->wgoalp = cpu_to_scr(goalp);
- if (dir != DMA_BIDIRECTIONAL)
- break;
- cp->phys.head.wlastp = cpu_to_scr(lastp);
- /* fall through */
-#else
- break;
-#endif
- case DMA_FROM_DEVICE:
- cp->host_flags |= HF_DATA_IN;
- goalp = SCRIPTA_BA(np, data_in2) + 8;
- lastp = goalp - 8 - (cp->segments * (2*4));
- break;
- case DMA_NONE:
- default:
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- cp->host_flags |= HF_DATA_IN;
-#endif
- lastp = goalp = SCRIPTB_BA(np, no_data);
- break;
- }
-
- /*
- * Set all pointers values needed by SCRIPTS.
- */
- cp->phys.head.lastp = cpu_to_scr(lastp);
- cp->phys.head.savep = cpu_to_scr(lastp);
- cp->startp = cp->phys.head.savep;
- cp->goalp = cpu_to_scr(goalp);
-
-#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN
- /*
- * If direction is unknown, start at data_io.
- */
- if (dir == DMA_BIDIRECTIONAL)
- cp->phys.head.savep = cpu_to_scr(SCRIPTB_BA(np, data_io));
-#endif
-}
-
-/*
* MEMORY ALLOCATOR.
*/
---
0.99.9.GIT
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
