Bring model descriptions in sync with Emulex standard generic names.
Signed-off-by: James Smart <James.Smart@xxxxxxxxxx>
diff -upNr a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
--- a/drivers/scsi/lpfc/lpfc_hw.h 2005-11-28 10:51:01.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_hw.h 2005-11-28 10:55:21.000000000 -0500
@@ -1054,6 +1054,12 @@ typedef struct {
#define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
+#define PCI_SUBSYSTEM_ID_LP11000S 0xfc11
+#define PCI_SUBSYSTEM_ID_LP11002S 0xfc12
+#define PCI_SUBSYSTEM_ID_LPE11000S 0xfc21
+#define PCI_SUBSYSTEM_ID_LPE11002S 0xfc22
+#define PCI_SUBSYSTEM_ID_LPE11010S 0xfc2A
+
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
#define SUPERFLY_JEDEC_ID 0x0020
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2005-11-28 10:51:01.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_init.c 2005-11-28 10:55:21.000000000 -0500
@@ -760,8 +760,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba
{
lpfc_vpd_t *vp;
uint16_t dev_id;
+ uint16_t dev_subid;
uint8_t hdrtype;
- char str[16];
+ char *model_str = "";
vp = &phba->vpd;
pci_read_config_word(phba->pcidev, PCI_DEVICE_ID, &dev_id);
@@ -769,122 +770,132 @@ lpfc_get_hba_model_desc(struct lpfc_hba
switch (dev_id) {
case PCI_DEVICE_ID_FIREFLY:
- strcpy(str, "LP6000 1");
+ model_str = "LP6000 1Gb PCI";
break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
- strcpy(str, "LP7000 1");
+ model_str = "LP7000 1Gb PCI";
else
- strcpy(str, "LP7000E 1");
+ model_str = "LP7000E 1Gb PCI";
break;
case PCI_DEVICE_ID_DRAGONFLY:
- strcpy(str, "LP8000 1");
+ model_str = "LP8000 1Gb PCI";
break;
case PCI_DEVICE_ID_CENTAUR:
if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
- strcpy(str, "LP9002 2");
+ model_str = "LP9002 2Gb PCI";
else
- strcpy(str, "LP9000 1");
+ model_str = "LP9000 1Gb PCI";
break;
case PCI_DEVICE_ID_RFLY:
- strcpy(str, "LP952 2");
+ model_str = "LP952 2Gb PCI";
break;
case PCI_DEVICE_ID_PEGASUS:
- strcpy(str, "LP9802 2");
+ model_str = "LP9802 2Gb PCI-X";
break;
case PCI_DEVICE_ID_THOR:
if (hdrtype == 0x80)
- strcpy(str, "LP10000DC 2");
+ model_str = "LP10000DC 2Gb 2-port PCI-X";
else
- strcpy(str, "LP10000 2");
+ model_str = "LP10000 2Gb PCI-X";
break;
case PCI_DEVICE_ID_VIPER:
- strcpy(str, "LPX1000 10");
+ model_str = "LPX1000 10Gb PCI-X";
break;
case PCI_DEVICE_ID_PFLY:
- strcpy(str, "LP982 2");
+ model_str = "LP982 2Gb PCI-X";
break;
case PCI_DEVICE_ID_TFLY:
if (hdrtype == 0x80)
- strcpy(str, "LP1050DC 2");
+ model_str = "LP1050DC 2Gb 2-port PCI-X";
else
- strcpy(str, "LP1050 2");
+ model_str = "LP1050 2Gb PCI-X";
break;
case PCI_DEVICE_ID_HELIOS:
if (hdrtype == 0x80)
- strcpy(str, "LP11002 4");
+ model_str = "LP11002 4Gb 2-port PCI-X2";
else
- strcpy(str, "LP11000 4");
+ model_str = "LP11000 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_HELIOS_SCSP:
- strcpy(str, "LP11000-SP 4");
+ model_str = "LP11000-SP 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_HELIOS_DCSP:
- strcpy(str, "LP11002-SP 4");
+ model_str = "LP11002-SP 4Gb 2-port PCI-X2";
break;
case PCI_DEVICE_ID_NEPTUNE:
if (hdrtype == 0x80)
- strcpy(str, "LPe1002 4");
+ model_str = "LPe1002 4Gb 2-port";
else
- strcpy(str, "LPe1000 4");
+ model_str = "LPe1000 4Gb PCIe";
break;
case PCI_DEVICE_ID_NEPTUNE_SCSP:
- strcpy(str, "LPe1000-SP 4");
+ model_str = "LPe1000-SP 4Gb PCIe";
break;
case PCI_DEVICE_ID_NEPTUNE_DCSP:
- strcpy(str, "LPe1002-SP 4");
+ model_str = "LPe1002-SP 4Gb 2-port PCIe";
break;
case PCI_DEVICE_ID_BMID:
- strcpy(str, "LP1150 4");
+ model_str = "LP1150 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_BSMB:
- strcpy(str, "LP111 4");
+ model_str = "LP111 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_ZEPHYR:
if (hdrtype == 0x80)
- strcpy(str, "LPe11002 4");
+ model_str = "LPe11002 4Gb 2-port PCIe";
else
- strcpy(str, "LPe11000 4");
+ model_str = "LPe11000 4Gb PCIe";
break;
case PCI_DEVICE_ID_ZEPHYR_SCSP:
- strcpy(str, "LPe11000-SP 4");
+ model_str = "LPe11000-SP 4Gb PCIe";
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- strcpy(str, "LPe11002-SP 4");
+ model_str = "LPe11002-SP 4Gb 2-port PCIe";
break;
case PCI_DEVICE_ID_ZMID:
- strcpy(str, "LPe1150 4");
+ model_str = "LPe1150 4Gb PCIe";
break;
case PCI_DEVICE_ID_ZSMB:
- strcpy(str, "LPe111 4");
+ model_str = "LPe111 4Gb PCIe";
break;
case PCI_DEVICE_ID_LP101:
- strcpy(str, "LP101 2");
+ model_str = "LP101 2Gb PCI-X";
break;
case PCI_DEVICE_ID_LP10000S:
- strcpy(str, "LP10000-S 2");
- break;
- default:
- memset(str, 0, 16);
+ model_str = "LP10000-S 2Gb PCI";
break;
case PCI_DEVICE_ID_LP11000S:
- if (hdrtype == 0x80)
- strcpy(str, "LP11002-S 4");
- else
- strcpy(str, "LP11000-S 4");
- break;
case PCI_DEVICE_ID_LPE11000S:
- if (hdrtype == 0x80)
- strcpy(str, "LPe11002-S 4");
- else
- strcpy(str, "LPe11000-S 4");
+ pci_read_config_word(phba->pcidev, PCI_SUBSYSTEM_ID,
+ &dev_subid);
+ switch (dev_subid) {
+ case PCI_SUBSYSTEM_ID_LP11000S:
+ model_str = "LP11002-S 4Gb PCI-X2";
+ break;
+ case PCI_SUBSYSTEM_ID_LP11002S:
+ model_str = "LP11000-S 4Gb 2-port PCI-X2";
+ break;
+ case PCI_SUBSYSTEM_ID_LPE11000S:
+ model_str = "LPe11002-S 4Gb PCIe";
+ break;
+ case PCI_SUBSYSTEM_ID_LPE11002S:
+ model_str = "LPe11002-S 4Gb 2-port PCIe";
+ break;
+ case PCI_SUBSYSTEM_ID_LPE11010S:
+ model_str = "LPe11010-S 4Gb 10-port PCIe";
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
break;
}
if (mdp)
- sscanf(str, "%s", mdp);
+ sscanf(model_str, "%s", mdp);
if (descp)
- sprintf(descp, "Emulex LightPulse %s Gigabit PCI Fibre "
- "Channel Adapter", str);
+ sprintf(descp, "Emulex %s Fibre Channel Adapter", model_str);
}
/**************************************************/
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
