Machine:
Tyan s2822G3NR-D
Silicon Image, Inc. SiI 3114
SATA Drives: Western Digital 300gb / seagate 80 gb
Initially we thought we had a network issue because we were seeing a
slowdown when transferring files > 512Mb in size (by whatever method: rsync,
cp, scp, etc.) between two of the Tyan servers, we see the first 512Mb go at
a decent rate (tens of megabytes per second) and then the rate plummets to
below 500k/sec. However we reproduce the issue locally on a machine thus
eliminating the network card issue. We also had tried with different
ethernet cards and x-over cable.
We are using CentOS 4 and have tried both 4.1 and 4.2 (the latest edition)
64 and 32 bit. We have tried ubuntu, gentoo, and vanilla kernels. We have
upgraded our BIOS to the latest and experimented with different BIOS
settings (from 'safe' to 'optimal' with many variants in between.) We have
tried it with ACPI switched off, with 4gb of RAM and with 8gb of RAM. We
have upgraded the BIOS to 3.04 & then 3.05. The best we get is that under
the ubuntu, gentoo, and a 2.4 kernel we can see stable performance that is
well below what we should be getting ~20MiB/s.
No matter what combination of configuration we try, we consistently see this
issue. We have even tried and LSI SATA controller w/ Tyan motherboard and
experienced the same issues.
We moved the SATA controller to a Dell PE 1750 and experience none of the
slowdowns, consistent ly 45-50MiB/s performance with no erraticness in speed
or drops in performance.
We suspect the issue is related to the combo of the Tyan mobo with the SATA
controller subsystem but need some assistance in further nailing down the
cause and solution to this issue.
Let me know of any additional information that I can provide to assist with
the debugging of this issue.
Thanks,
-asher
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
