Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/Makefile | 3 +
drivers/scsi/qla2xxx/qla_init.c | 61 +++++++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_os.c | 82 +++++++++++++--------------------------
3 files changed, 91 insertions(+), 55 deletions(-)
applies-to: b089655ba9fe518bb958b9bafc29daa54b3822e5
a94d6192c236c57e52dd5b05320a553b3c9932d6
diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile
index 549dfe4..40c0de1 100644
--- a/drivers/scsi/qla2xxx/Makefile
+++ b/drivers/scsi/qla2xxx/Makefile
@@ -10,10 +10,11 @@ qla2200-y := ql2200.o ql2200_fw.o
qla2300-y := ql2300.o ql2300_fw.o
qla2322-y := ql2322.o ql2322_fw.o
qla6312-y := ql6312.o ql6312_fw.o
+qla2400-y := ql2400.o ql2400_fw.o
obj-$(CONFIG_SCSI_QLA21XX) += qla2xxx.o qla2100.o
obj-$(CONFIG_SCSI_QLA22XX) += qla2xxx.o qla2200.o
obj-$(CONFIG_SCSI_QLA2300) += qla2xxx.o qla2300.o
obj-$(CONFIG_SCSI_QLA2322) += qla2xxx.o qla2322.o
obj-$(CONFIG_SCSI_QLA6312) += qla2xxx.o qla6312.o
-obj-$(CONFIG_SCSI_QLA24XX) += qla2xxx.o
+obj-$(CONFIG_SCSI_QLA24XX) += qla2xxx.o qla2400.o
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2425289..88bd78e 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3550,6 +3550,67 @@ qla2x00_load_risc(scsi_qla_host_t *ha, u
}
int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval, num, i;
+ uint32_t cnt;
+ uint32_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint32_t *req_ring;
+ struct qla_fw_info *fw_iter;
+
+ rval = QLA_SUCCESS;
+
+ /* Load firmware sequences */
+ fw_iter = ha->brd_info->fw_info;
+ *srisc_addr = *((uint32_t *)fw_iter->lfwstart);
+ while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
+ risc_code = (uint32_t *)fw_iter->fwcode;
+ risc_size = *((uint32_t *)fw_iter->fwlen);
+ risc_addr = *((uint32_t *)fw_iter->lfwstart);
+
+ num = 0;
+ rval = 0;
+ while (risc_size > 0 && !rval) {
+ cnt = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (cnt > risc_size)
+ cnt = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ "
+ "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
+ ha->host_no, risc_code, cnt, risc_addr));
+
+ req_ring = (uint32_t *)ha->request_ring;
+ for (i = 0; i < cnt; i++)
+ req_ring[i] = cpu_to_le32(risc_code[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): [ERROR] Failed to "
+ "load segment %d of firmware\n",
+ ha->host_no, num));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", num);
+
+ qla2x00_dump_regs(ha);
+ break;
+ }
+
+ risc_code += cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
+ num++;
+ }
+
+ /* Next firmware sequence */
+ fw_iter++;
+ }
+ return rval;
+}
+
+int
qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
int rval;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index b98ad53..71dfeba 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -54,6 +54,13 @@ module_param(ql2xloginretrycount, int, S
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+int ql2xfwloadflash;
+module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfwloadflash,
+ "Load ISP24xx firmware image from FLASH (onboard memory).");
+#endif
+
static void qla2x00_free_device(scsi_qla_host_t *);
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
@@ -1367,10 +1374,10 @@ int qla2x00_probe_one(struct pci_dev *pd
ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
ha->isp_ops.nvram_config = qla24xx_nvram_config;
ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
-#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
- ha->isp_ops.load_risc = qla24xx_load_risc_flash;
-#else
ha->isp_ops.load_risc = qla24xx_load_risc;
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+ if (ql2xfwloadflash)
+ ha->isp_ops.load_risc = qla24xx_load_risc_flash;
#endif
ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
@@ -2488,53 +2495,8 @@ qla2x00_down_timeout(struct semaphore *s
#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
#define qla2x00_release_firmware() do { } while (0)
-
-static struct qla_board_info qla_board_tbl[] = {
- {
- .drv_name = "qla2400",
- .isp_name = "ISP2422",
- .fw_fname = "ql2400_fw.bin",
- .sht = &qla24xx_driver_template,
- },
- {
- .drv_name = "qla2400",
- .isp_name = "ISP2432",
- .fw_fname = "ql2400_fw.bin",
- .sht = &qla24xx_driver_template,
- },
-};
-
-static struct pci_device_id qla2xxx_pci_tbl[] = {
- {
- .vendor = PCI_VENDOR_ID_QLOGIC,
- .device = PCI_DEVICE_ID_QLOGIC_ISP2422,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long)&qla_board_tbl[0],
- },
- {
- .vendor = PCI_VENDOR_ID_QLOGIC,
- .device = PCI_DEVICE_ID_QLOGIC_ISP2432,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long)&qla_board_tbl[1],
- },
- {0, 0},
-};
-MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
-
-static int __devinit
-qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- return qla2x00_probe_one(pdev,
- (struct qla_board_info *)id->driver_data);
-}
-
-static void __devexit
-qla2xxx_remove_one(struct pci_dev *pdev)
-{
- qla2x00_remove_one(pdev);
-}
+#define qla2x00_pci_module_init() (0)
+#define qla2x00_pci_module_exit() do { } while (0)
#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
@@ -2645,8 +2607,6 @@ qla2xxx_remove_one(struct pci_dev *pdev)
qla2x00_remove_one(pdev);
}
-#endif
-
static struct pci_driver qla2xxx_pci_driver = {
.name = "qla2xxx",
.owner = THIS_MODULE,
@@ -2655,6 +2615,20 @@ static struct pci_driver qla2xxx_pci_dri
.remove = __devexit_p(qla2xxx_remove_one),
};
+static inline int
+qla2x00_pci_module_init(void)
+{
+ return pci_module_init(&qla2xxx_pci_driver);
+}
+
+static inline void
+qla2x00_pci_module_exit(void)
+{
+ pci_unregister_driver(&qla2xxx_pci_driver);
+}
+
+#endif
+
/**
* qla2x00_module_init - Module initialization.
**/
@@ -2686,7 +2660,7 @@ qla2x00_module_init(void)
return -ENODEV;
printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
- ret = pci_module_init(&qla2xxx_pci_driver);
+ ret = qla2x00_pci_module_init();
if (ret) {
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
@@ -2700,7 +2674,7 @@ qla2x00_module_init(void)
static void __exit
qla2x00_module_exit(void)
{
- pci_unregister_driver(&qla2xxx_pci_driver);
+ qla2x00_pci_module_exit();
qla2x00_release_firmware();
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
---
0.99.9.GIT
--
Andrew Vasquez
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
