thomas schorpp wrote: > Timothy Thelin wrote: > >>>On Mon, 7 Nov 2005, James Bottomley wrote: >>> >> >>It was generated against Linus' git repo after >>applying Alan's patch. >> >>With both patches applied I can now do passthru cdbs on the >>cypress part without issue, and I still don't see any IO issues. >> >>Anyone out there have a better selection of hardware to test with? >> > > > first i need better software, the 2.6.14-git-11 snapshot wont boot, cause > it tries to mount root without detecting partitions before :/ > > did i miss some patch since this snapshot? > ok, applies against 2.6.14.0. device: cypress -A- bridge. no change with smartctl: tom1:/usr/src/sm5/debug# ./smartctl -a -r ioctl,2 -T verypermissive /dev/sda smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ [inquiry: 12 00 00 00 24 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds Incoming data, len=36: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 status=0x0 Device: IC35L030 AVVN07-0 Version: [mode sense: 1a 00 1c 00 40 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=64: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 [inquiry: 12 01 80 00 40 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=4 milliseconds Incoming data, len=64: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 Vital Product Data (VPD) bit ignored in INQUIRY Device type: disk [mode sense: 1a 00 19 00 40 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=4 milliseconds Incoming data, len=64: 00 00 00 00 00 e8 30 ef c7 80 35 23 c5 00 00 00 00 10 70 6a bd c5 a0 84 11 c0 00 01 10 00 00 02 20 00 20 18 5e 3f d0 20 af 02 c8 00 00 00 00 70 6a bd c5 30 a0 84 11 c0 00 01 10 00 00 02 20 00 18 be db c5 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 Local Time is: Wed Nov 9 10:34:46 2005 CET [test unit ready: 00 00 00 00 00 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds status=0x0 Device does not support SMART [unsupported field in scsi command] [log sense: 4d 00 40 00 00 00 00 00 04 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=4: 00 54 5a 69 66 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 10 00 00 status=2: sense_key=5 asc=20 ascq=0 Log Sense for supported pages failed [unsupported scsi opcode] [request sense: 03 00 00 00 12 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=4 milliseconds Incoming data, len=18: 00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00 10 00 00 status=0x0 [read defect list(10): 37 00 0c 00 00 00 00 00 04 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=4: 00 70 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 10 00 00 status=2: sense_key=5 asc=20 ascq=0 Read defect list (10) Failed: unsupported scsi opcode Error Counter logging not supported [mode sense: 1a 00 0a 00 40 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=64: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 Device does not support Self Test logging tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# ./smartctl -a -r ioctl,2 -T verypermissive /dev/sg0 smartctl version 5.34 [i686-pc-linux-gnu] Copyright (C) 2002-5 Bruce Allen Home page is http://smartmontools.sourceforge.net/ [inquiry: 12 00 00 00 24 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds Incoming data, len=36: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 status=0x0 Device: IC35L030 AVVN07-0 Version: [mode sense: 1a 00 1c 00 40 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=64: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 11 00 00 00 06 00 00 00 00 00 00 00 30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 [inquiry: 12 01 80 00 40 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=4 milliseconds Incoming data, len=64: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00 status=0x0 Vital Product Data (VPD) bit ignored in INQUIRY Device type: disk [mode sense: 1a 00 19 00 40 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=64: 00 00 00 00 00 1f 00 00 00 49 43 33 35 4c 30 33 30 10 41 56 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 Local Time is: Wed Nov 9 10:35:47 2005 CET [test unit ready: 00 00 00 00 00 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds status=0x0 Device does not support SMART [unsupported field in scsi command] [log sense: 4d 00 40 00 00 00 00 00 04 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=4: 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 10 00 00 status=2: sense_key=5 asc=20 ascq=0 Log Sense for supported pages failed [unsupported scsi opcode] [request sense: 03 00 00 00 12 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds Incoming data, len=18: 00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00 10 00 00 status=0x0 [read defect list(10): 37 00 0c 00 00 00 00 00 04 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=4: 00 70 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 10 00 00 status=2: sense_key=5 asc=20 ascq=0 Read defect list (10) Failed: unsupported scsi opcode Error Counter logging not supported [mode sense: 1a 00 0a 00 40 00 ] scsi_status=0x2, host_status=0x0, driver_status=0x8 info=0x1 duration=0 milliseconds Incoming data, len=64: 00 70 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00 10 00 00 56 4e 30 37 2d 30 20 20 20 20 20 20 20 20 20 00 30 00 30 00 00 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 11 00 00 00 07 00 00 00 00 00 00 00 >>> Sense buffer, len=18: 00 70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 10 00 00 status=2: sense_key=5 asc=24 ascq=0 Device does not support Self Test logging tom1:/usr/src/sm5/debug# no change with sdparm: tom1:/usr/src/sm5/debug# sdparm -avl /dev/sda /dev/sda: IC35L030 AVVN07-0 Read write error recovery [PS=0] mode page: AWRE 0 [cha: n, def: 0, sav: 0] Automatic write reallocation enabled ARRE 0 [cha: n, def: 0, sav: 0] Automatic read reallocation enabled TB 0 [cha: n, def: 0, sav: 0] Transfer block RC 0 [cha: n, def: 0, sav: 0] Read continuous EER 0 [cha: n, def: 0, sav: 0] Enable early recover PER 0 [cha: n, def: 0, sav: 0] Post error DTE 0 [cha: n, def: 0, sav: 0] Data terminate on error DCR 0 [cha: n, def: 0, sav: 0] Disable correction RRC 0 [cha: n, def: 0, sav: 0] Read retry count WRC 0 [cha: n, def: 0, sav: 0] Write retry count RTL 0 [cha: n, def: 0, sav: 0] Recovery time limit (ms) >> Format (SBC) mode page not supported >> Rigid disk (SBC) mode page not supported >> Verify error recovery (SBC) mode page not supported Caching (SBC) [PS=0] mode page: IC 0 [cha: n, def: 0, sav: 0] Initiator control ABPF 0 [cha: n, def: 0, sav: 0] Abort pre-fetch CAP 0 [cha: n, def: 0, sav: 0] Caching analysis permitted DISC 0 [cha: n, def: 0, sav: 0] Discontinuity SIZE 0 [cha: n, def: 0, sav: 0] Size (1->CSS valid, 0->NCS valid) WCE 0 [cha: n, def: 0, sav: 0] Write cache enable MF 0 [cha: n, def: 0, sav: 0] Multiplication factor RCD 0 [cha: n, def: 0, sav: 0] Read cache disable DRRP 0 [cha: n, def: 0, sav: 0] Demand read retension priority WRP 0 [cha: n, def: 0, sav: 0] Write retension priority DPTL 0 [cha: n, def: 0, sav: 0] Disable pre-fetch transfer length MIPF 0 [cha: n, def: 0, sav: 0] Minimum pre-fetch MAPF 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch MAPFC 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch ceiling >> skipping rest as field position exceeds mode page length=12 >> Control mode page not supported >> XOR control (SBC) mode page not supported >> Protocol specific logical unit mode page not supported >> Protocol specific port mode page not supported >> Power condition mode page not supported >> Informational exceptions control mode page not supported >> Background control (SBC) mode subpage not supported tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# sdparm -avl /dev/sg0 /dev/sg0: IC35L030 AVVN07-0 Read write error recovery [PS=0] mode page: AWRE 0 [cha: n, def: 0, sav: 0] Automatic write reallocation enabled ARRE 0 [cha: n, def: 0, sav: 0] Automatic read reallocation enabled TB 0 [cha: n, def: 0, sav: 0] Transfer block RC 0 [cha: n, def: 0, sav: 0] Read continuous EER 0 [cha: n, def: 0, sav: 0] Enable early recover PER 0 [cha: n, def: 0, sav: 0] Post error DTE 0 [cha: n, def: 0, sav: 0] Data terminate on error DCR 0 [cha: n, def: 0, sav: 0] Disable correction RRC 0 [cha: n, def: 0, sav: 0] Read retry count WRC 0 [cha: n, def: 0, sav: 0] Write retry count RTL 0 [cha: n, def: 0, sav: 0] Recovery time limit (ms) >> Format (SBC) mode page not supported >> Rigid disk (SBC) mode page not supported >> Verify error recovery (SBC) mode page not supported Caching (SBC) [PS=0] mode page: IC 0 [cha: n, def: 0, sav: 0] Initiator control ABPF 0 [cha: n, def: 0, sav: 0] Abort pre-fetch CAP 0 [cha: n, def: 0, sav: 0] Caching analysis permitted DISC 0 [cha: n, def: 0, sav: 0] Discontinuity SIZE 0 [cha: n, def: 0, sav: 0] Size (1->CSS valid, 0->NCS valid) WCE 0 [cha: n, def: 0, sav: 0] Write cache enable MF 0 [cha: n, def: 0, sav: 0] Multiplication factor RCD 0 [cha: n, def: 0, sav: 0] Read cache disable DRRP 0 [cha: n, def: 0, sav: 0] Demand read retension priority WRP 0 [cha: n, def: 0, sav: 0] Write retension priority DPTL 0 [cha: n, def: 0, sav: 0] Disable pre-fetch transfer length MIPF 0 [cha: n, def: 0, sav: 0] Minimum pre-fetch MAPF 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch MAPFC 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch ceiling >> skipping rest as field position exceeds mode page length=12 >> Control mode page not supported >> XOR control (SBC) mode page not supported >> Protocol specific logical unit mode page not supported >> Protocol specific port mode page not supported >> Power condition mode page not supported >> Informational exceptions control mode page not supported >> Background control (SBC) mode subpage not supported tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# tom1:/usr/src/sm5/debug# sdparm -avl6 /dev/sg0 /dev/sg0: IC35L030 AVVN07-0 Read write error recovery [PS=0] mode page: AWRE 0 [cha: n, def: 0, sav: 0] Automatic write reallocation enabled ARRE 0 [cha: n, def: 0, sav: 0] Automatic read reallocation enabled TB 0 [cha: n, def: 0, sav: 0] Transfer block RC 0 [cha: n, def: 0, sav: 0] Read continuous EER 0 [cha: n, def: 0, sav: 0] Enable early recover PER 0 [cha: n, def: 0, sav: 0] Post error DTE 0 [cha: n, def: 0, sav: 0] Data terminate on error DCR 0 [cha: n, def: 0, sav: 0] Disable correction RRC 0 [cha: n, def: 0, sav: 0] Read retry count WRC 0 [cha: n, def: 0, sav: 0] Write retry count RTL 0 [cha: n, def: 0, sav: 0] Recovery time limit (ms) >> Format (SBC) mode page not supported >> Rigid disk (SBC) mode page not supported >> Verify error recovery (SBC) mode page not supported Caching (SBC) [PS=0] mode page: IC 0 [cha: n, def: 0, sav: 0] Initiator control ABPF 0 [cha: n, def: 0, sav: 0] Abort pre-fetch CAP 0 [cha: n, def: 0, sav: 0] Caching analysis permitted DISC 0 [cha: n, def: 0, sav: 0] Discontinuity SIZE 0 [cha: n, def: 0, sav: 0] Size (1->CSS valid, 0->NCS valid) WCE 0 [cha: n, def: 0, sav: 0] Write cache enable MF 0 [cha: n, def: 0, sav: 0] Multiplication factor RCD 0 [cha: n, def: 0, sav: 0] Read cache disable DRRP 0 [cha: n, def: 0, sav: 0] Demand read retension priority WRP 0 [cha: n, def: 0, sav: 0] Write retension priority DPTL 0 [cha: n, def: 0, sav: 0] Disable pre-fetch transfer length MIPF 0 [cha: n, def: 0, sav: 0] Minimum pre-fetch MAPF 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch MAPFC 0 [cha: n, def: 0, sav: 0] Maximum pre-fetch ceiling >> skipping rest as field position exceeds mode page length=12 >> Control mode page not supported >> XOR control (SBC) mode page not supported >> Protocol specific logical unit mode page not supported >> Protocol specific port mode page not supported >> Power condition mode page not supported >> Informational exceptions control mode page not supported >> Background control (SBC) mode subpage not supported tom1:/usr/src/sm5/debug# - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
