Received from Mark Salyzyn.
This patch adds the 'new comm' interface, which modern AAC based
adapters that are less than a year old support in the name of much
improved performance. These modern adapters support both the legacy and
the 'new comm' interfaces.
Signed-off-by: Mark Haverkamp <markh@xxxxxxxx>
---
Index: scsi-rc-aac-1/drivers/scsi/aacraid/README
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/README 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/README 2005-10-19 13:04:18.000000000 -0700
@@ -57,7 +57,7 @@
(fixed 64bit and 64G memory model, changed confusing naming convention
where fibs that go to the hardware are consistently called hw_fibs and
not just fibs like the name of the driver tracking structure)
-Mark Salyzyn <Mark_Salyzyn@xxxxxxxxxxx> Fixed panic issues and added some new product ids for upcoming hbas.
+Mark Salyzyn <Mark_Salyzyn@xxxxxxxxxxx> Fixed panic issues and added some new product ids for upcoming hbas. Performance tuning, card failover and bug mitigations.
Original Driver
-------------------------
Index: scsi-rc-aac-1/drivers/scsi/aacraid/TODO
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/TODO 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/TODO 2005-10-19 13:04:18.000000000 -0700
@@ -1,4 +1,3 @@
o Testing
o More testing
-o Drop irq_mask, basically unused
o I/O size increase
Index: scsi-rc-aac-1/drivers/scsi/aacraid/aachba.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/aachba.c 2005-10-19 13:04:02.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/aachba.c 2005-10-19 13:04:18.000000000 -0700
@@ -359,15 +359,6 @@
return status;
}
-static void aac_io_done(struct scsi_cmnd * scsicmd)
-{
- unsigned long cpu_flags;
- struct Scsi_Host *host = scsicmd->device->host;
- spin_lock_irqsave(host->host_lock, cpu_flags);
- scsicmd->scsi_done(scsicmd);
- spin_unlock_irqrestore(host->host_lock, cpu_flags);
-}
-
static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len)
{
void *buf;
@@ -424,7 +415,7 @@
fib_complete(fibptr);
fib_free(fibptr);
- aac_io_done(scsicmd);
+ scsicmd->scsi_done(scsicmd);
}
/**
@@ -988,7 +979,7 @@
fib_complete(fibptr);
fib_free(fibptr);
- aac_io_done(scsicmd);
+ scsicmd->scsi_done(scsicmd);
}
static int aac_read(struct scsi_cmnd * scsicmd, int cid)
@@ -1167,7 +1158,7 @@
* For some reason, the Fib didn't queue, return QUEUE_FULL
*/
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
- aac_io_done(scsicmd);
+ scsicmd->scsi_done(scsicmd);
fib_complete(cmd_fibcontext);
fib_free(cmd_fibcontext);
return 0;
@@ -1239,7 +1230,7 @@
*/
if (!(cmd_fibcontext = fib_alloc(dev))) {
scsicmd->result = DID_ERROR << 16;
- aac_io_done(scsicmd);
+ scsicmd->scsi_done(scsicmd);
return 0;
}
fib_init(cmd_fibcontext);
@@ -1336,7 +1327,7 @@
* For some reason, the Fib didn't queue, return QUEUE_FULL
*/
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
- aac_io_done(scsicmd);
+ scsicmd->scsi_done(scsicmd);
fib_complete(cmd_fibcontext);
fib_free(cmd_fibcontext);
@@ -1380,7 +1371,7 @@
fib_complete(fibptr);
fib_free(fibptr);
- aac_io_done(cmd);
+ cmd->scsi_done(cmd);
}
static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
@@ -2097,7 +2088,7 @@
fib_complete(fibptr);
fib_free(fibptr);
- aac_io_done(scsicmd);
+ scsicmd->scsi_done(scsicmd);
}
/**
Index: scsi-rc-aac-1/drivers/scsi/aacraid/aacraid.h
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/aacraid.h 2005-10-19 13:04:06.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/aacraid.h 2005-10-19 13:04:18.000000000 -0700
@@ -481,6 +481,7 @@
#define FSAFS_NTC_FIB_CONTEXT 0x030c
struct aac_dev;
+struct fib;
struct adapter_ops
{
@@ -489,6 +490,7 @@
void (*adapter_disable_int)(struct aac_dev *dev);
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
+ int (*adapter_send)(struct fib * fib);
};
/*
@@ -659,6 +661,10 @@
Status Register */
__le32 OIMR; /* 1334h | 34h | Outbound Interrupt
Mask Register */
+ __le32 reserved2; /* 1338h | 38h | Reserved */
+ __le32 reserved3; /* 133Ch | 3Ch | Reserved */
+ __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */
+ __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */
/* * Must access through ATU Inbound
Translation Window */
};
@@ -693,8 +699,8 @@
#define OutboundDoorbellReg MUnit.ODR
struct rx_registers {
- struct rx_mu_registers MUnit; /* 1300h - 1334h */
- __le32 reserved1[6]; /* 1338h - 134ch */
+ struct rx_mu_registers MUnit; /* 1300h - 1344h */
+ __le32 reserved1[2]; /* 1348h - 134ch */
struct rx_inbound IndexRegs;
};
@@ -711,8 +717,8 @@
#define rkt_inbound rx_inbound
struct rkt_registers {
- struct rkt_mu_registers MUnit; /* 1300h - 1334h */
- __le32 reserved1[1010]; /* 1338h - 22fch */
+ struct rkt_mu_registers MUnit; /* 1300h - 1344h */
+ __le32 reserved1[1006]; /* 1348h - 22fch */
struct rkt_inbound IndexRegs; /* 2300h - */
};
@@ -721,8 +727,6 @@
#define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR))
#define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR))
-struct fib;
-
typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
struct aac_fib_context {
@@ -937,7 +941,6 @@
const char *name;
int id;
- u16 irq_mask;
/*
* negotiated FIB settings
*/
@@ -972,6 +975,7 @@
struct adapter_ops a_ops;
unsigned long fsrev; /* Main driver's revision number */
+ unsigned base_size; /* Size of mapped in region */
struct aac_init *init; /* Holds initialization info to communicate with adapter */
dma_addr_t init_pa; /* Holds physical address of the init struct */
@@ -992,6 +996,9 @@
/*
* The following is the device specific extension.
*/
+#if (!defined(AAC_MIN_FOOTPRINT_SIZE))
+# define AAC_MIN_FOOTPRINT_SIZE 8192
+#endif
union
{
struct sa_registers __iomem *sa;
@@ -1012,6 +1019,7 @@
u8 nondasd_support;
u8 dac_support;
u8 raid_scsi_mode;
+ u8 new_comm_interface;
/* macro side-effects BEWARE */
# define raw_io_interface \
init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4)
@@ -1034,6 +1042,8 @@
#define aac_adapter_check_health(dev) \
(dev)->a_ops.adapter_check_health(dev)
+#define aac_adapter_send(fib) \
+ ((fib)->dev)->a_ops.adapter_send(fib)
#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
@@ -1779,6 +1789,7 @@
int aac_sa_init(struct aac_dev *dev);
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
+unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
int aac_command_thread(struct aac_dev * dev);
int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
int fib_adapter_complete(struct fib * fibptr, unsigned short size);
Index: scsi-rc-aac-1/drivers/scsi/aacraid/comminit.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/comminit.c 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/comminit.c 2005-10-19 13:04:18.000000000 -0700
@@ -116,6 +116,10 @@
}
init->InitFlags = 0;
+ if (dev->new_comm_interface) {
+ init->InitFlags = cpu_to_le32(INITFLAGS_NEW_COMM_SUPPORTED);
+ dprintk((KERN_WARNING"aacraid: New Comm Interface enabled\n"));
+ }
init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
@@ -315,12 +319,33 @@
- sizeof(struct aac_fibhdr)
- sizeof(struct aac_write) + sizeof(struct sgentry))
/ sizeof(struct sgentry);
+ dev->new_comm_interface = 0;
dev->raw_io_64 = 0;
if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES,
0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) &&
(status[0] == 0x00000001)) {
if (status[1] & AAC_OPT_NEW_COMM_64)
dev->raw_io_64 = 1;
+ if (status[1] & AAC_OPT_NEW_COMM)
+ dev->new_comm_interface = dev->a_ops.adapter_send != 0;
+ if (dev->new_comm_interface && (status[2] > dev->base_size)) {
+ iounmap(dev->regs.sa);
+ dev->base_size = status[2];
+ dprintk((KERN_DEBUG "ioremap(%lx,%d)\n",
+ host->base, status[2]));
+ dev->regs.sa = ioremap(host->base, status[2]);
+ if (dev->regs.sa == NULL) {
+ /* remap failed, go back ... */
+ dev->new_comm_interface = 0;
+ dev->regs.sa = ioremap(host->base,
+ AAC_MIN_FOOTPRINT_SIZE);
+ if (dev->regs.sa == NULL) {
+ printk(KERN_WARNING
+ "aacraid: unable to map adapter.\n");
+ return NULL;
+ }
+ }
+ }
}
if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
0, 0, 0, 0, 0, 0,
Index: scsi-rc-aac-1/drivers/scsi/aacraid/commsup.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/commsup.c 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/commsup.c 2005-10-19 13:04:18.000000000 -0700
@@ -212,7 +212,7 @@
hw_fib->header.StructType = FIB_MAGIC;
hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
- hw_fib->header.SenderFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
+ hw_fib->header.SenderFibAddress = 0; /* Filled in later if needed */
hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
hw_fib->header.SenderSize = cpu_to_le16(fibptr->dev->max_fib_size);
}
@@ -380,9 +380,7 @@
int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority, int wait, int reply, fib_callback callback, void * callback_data)
{
- u32 index;
struct aac_dev * dev = fibptr->dev;
- unsigned long nointr = 0;
struct hw_fib * hw_fib = fibptr->hw_fib;
struct aac_queue * q;
unsigned long flags = 0;
@@ -417,7 +415,7 @@
* Map the fib into 32bits by using the fib number
*/
- hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr-dev->fibs)) << 1);
+ hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr - dev->fibs)) << 2);
hw_fib->header.SenderData = (u32)(fibptr - dev->fibs);
/*
* Set FIB state to indicate where it came from and if we want a
@@ -456,10 +454,10 @@
FIB_COUNTER_INCREMENT(aac_config.FibsSent);
- dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index));
dprintk((KERN_DEBUG "Fib contents:.\n"));
- dprintk((KERN_DEBUG " Command = %d.\n", hw_fib->header.Command));
- dprintk((KERN_DEBUG " XferState = %x.\n", hw_fib->header.XferState));
+ dprintk((KERN_DEBUG " Command = %d.\n", le32_to_cpu(hw_fib->header.Command)));
+ dprintk((KERN_DEBUG " SubCommand = %d.\n", le32_to_cpu(((struct aac_query_mount *)fib_data(fibptr))->command)));
+ dprintk((KERN_DEBUG " XferState = %x.\n", le32_to_cpu(hw_fib->header.XferState)));
dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib));
dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr));
@@ -469,14 +467,37 @@
if(wait)
spin_lock_irqsave(&fibptr->event_lock, flags);
spin_lock_irqsave(q->lock, qflags);
- aac_queue_get( dev, &index, AdapNormCmdQueue, hw_fib, 1, fibptr, &nointr);
+ if (dev->new_comm_interface) {
+ unsigned long count = 10000000L; /* 50 seconds */
+ list_add_tail(&fibptr->queue, &q->pendingq);
+ q->numpending++;
+ spin_unlock_irqrestore(q->lock, qflags);
+ while (aac_adapter_send(fibptr) != 0) {
+ if (--count == 0) {
+ if (wait)
+ spin_unlock_irqrestore(&fibptr->event_lock, flags);
+ spin_lock_irqsave(q->lock, qflags);
+ q->numpending--;
+ list_del(&fibptr->queue);
+ spin_unlock_irqrestore(q->lock, qflags);
+ return -ETIMEDOUT;
+ }
+ udelay(5);
+ }
+ } else {
+ u32 index;
+ unsigned long nointr = 0;
+ aac_queue_get( dev, &index, AdapNormCmdQueue, hw_fib, 1, fibptr, &nointr);
+
+ list_add_tail(&fibptr->queue, &q->pendingq);
+ q->numpending++;
+ *(q->headers.producer) = cpu_to_le32(index + 1);
+ spin_unlock_irqrestore(q->lock, qflags);
+ dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index));
+ if (!(nointr & aac_config.irq_mod))
+ aac_adapter_notify(dev, AdapNormCmdQueue);
+ }
- list_add_tail(&fibptr->queue, &q->pendingq);
- q->numpending++;
- *(q->headers.producer) = cpu_to_le32(index + 1);
- spin_unlock_irqrestore(q->lock, qflags);
- if (!(nointr & aac_config.irq_mod))
- aac_adapter_notify(dev, AdapNormCmdQueue);
/*
* If the caller wanted us to wait for response wait now.
*/
@@ -492,7 +513,6 @@
* hardware failure has occurred.
*/
unsigned long count = 36000000L; /* 3 minutes */
- unsigned long qflags;
while (down_trylock(&fibptr->event_wait)) {
if (--count == 0) {
spin_lock_irqsave(q->lock, qflags);
@@ -621,12 +641,16 @@
unsigned long qflags;
if (hw_fib->header.XferState == 0) {
+ if (dev->new_comm_interface)
+ kfree (hw_fib);
return 0;
}
/*
* If we plan to do anything check the structure type first.
*/
if ( hw_fib->header.StructType != FIB_MAGIC ) {
+ if (dev->new_comm_interface)
+ kfree (hw_fib);
return -EINVAL;
}
/*
@@ -637,21 +661,25 @@
* send the completed cdb to the adapter.
*/
if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
- u32 index;
- hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
- if (size) {
- size += sizeof(struct aac_fibhdr);
- if (size > le16_to_cpu(hw_fib->header.SenderSize))
- return -EMSGSIZE;
- hw_fib->header.Size = cpu_to_le16(size);
+ if (dev->new_comm_interface) {
+ kfree (hw_fib);
+ } else {
+ u32 index;
+ hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
+ if (size) {
+ size += sizeof(struct aac_fibhdr);
+ if (size > le16_to_cpu(hw_fib->header.SenderSize))
+ return -EMSGSIZE;
+ hw_fib->header.Size = cpu_to_le16(size);
+ }
+ q = &dev->queues->queue[AdapNormRespQueue];
+ spin_lock_irqsave(q->lock, qflags);
+ aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr);
+ *(q->headers.producer) = cpu_to_le32(index + 1);
+ spin_unlock_irqrestore(q->lock, qflags);
+ if (!(nointr & (int)aac_config.irq_mod))
+ aac_adapter_notify(dev, AdapNormRespQueue);
}
- q = &dev->queues->queue[AdapNormRespQueue];
- spin_lock_irqsave(q->lock, qflags);
- aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr);
- *(q->headers.producer) = cpu_to_le32(index + 1);
- spin_unlock_irqrestore(q->lock, qflags);
- if (!(nointr & (int)aac_config.irq_mod))
- aac_adapter_notify(dev, AdapNormRespQueue);
}
else
{
Index: scsi-rc-aac-1/drivers/scsi/aacraid/dpcsup.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/dpcsup.c 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/dpcsup.c 2005-10-19 13:04:18.000000000 -0700
@@ -73,7 +73,7 @@
int fast;
u32 index = le32_to_cpu(entry->addr);
fast = index & 0x01;
- fib = &dev->fibs[index >> 1];
+ fib = &dev->fibs[index >> 2];
hwfib = fib->hw_fib;
aac_consumer_free(dev, q, HostNormRespQueue);
@@ -213,3 +213,116 @@
spin_unlock_irqrestore(q->lock, flags);
return 0;
}
+
+
+/**
+ * aac_intr_normal - Handle command replies
+ * @dev: Device
+ * @index: completion reference
+ *
+ * This DPC routine will be run when the adapter interrupts us to let us
+ * know there is a response on our normal priority queue. We will pull off
+ * all QE there are and wake up all the waiters before exiting.
+ */
+
+unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index)
+{
+ u32 index = le32_to_cpu(Index);
+
+ dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, Index));
+ if ((index & 0x00000002L)) {
+ struct hw_fib * hw_fib;
+ struct fib * fib;
+ struct aac_queue *q = &dev->queues->queue[HostNormCmdQueue];
+ unsigned long flags;
+
+ if (index == 0xFFFFFFFEL) /* Special Case */
+ return 0; /* Do nothing */
+ /*
+ * Allocate a FIB. For non queued stuff we can just use
+ * the stack so we are happy. We need a fib object in order to
+ * manage the linked lists.
+ */
+ if ((!dev->aif_thread)
+ || (!(fib = kmalloc(sizeof(struct fib),GFP_ATOMIC))))
+ return 1;
+ if (!(hw_fib = kmalloc(sizeof(struct hw_fib),GFP_ATOMIC))) {
+ kfree (fib);
+ return 1;
+ }
+ memset(hw_fib, 0, sizeof(struct hw_fib));
+ memcpy(hw_fib, (struct hw_fib *)(((unsigned long)(dev->regs.sa)) + (index & ~0x00000002L)), sizeof(struct hw_fib));
+ memset(fib, 0, sizeof(struct fib));
+ INIT_LIST_HEAD(&fib->fiblink);
+ fib->type = FSAFS_NTC_FIB_CONTEXT;
+ fib->size = sizeof(struct fib);
+ fib->hw_fib = hw_fib;
+ fib->data = hw_fib->data;
+ fib->dev = dev;
+
+ spin_lock_irqsave(q->lock, flags);
+ list_add_tail(&fib->fiblink, &q->cmdq);
+ wake_up_interruptible(&q->cmdready);
+ spin_unlock_irqrestore(q->lock, flags);
+ return 1;
+ } else {
+ int fast = index & 0x01;
+ struct fib * fib = &dev->fibs[index >> 2];
+ struct hw_fib * hwfib = fib->hw_fib;
+
+ /*
+ * Remove this fib from the Outstanding I/O queue.
+ * But only if it has not already been timed out.
+ *
+ * If the fib has been timed out already, then just
+ * continue. The caller has already been notified that
+ * the fib timed out.
+ */
+ if ((fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
+ printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags);
+ printk(KERN_DEBUG"aacraid: hwfib=%p index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib);
+ return 0;
+ }
+
+ list_del(&fib->queue);
+ dev->queues->queue[AdapNormCmdQueue].numpending--;
+
+ if (fast) {
+ /*
+ * Doctor the fib
+ */
+ *(__le32 *)hwfib->data = cpu_to_le32(ST_OK);
+ hwfib->header.XferState |= cpu_to_le32(AdapterProcessed);
+ }
+
+ FIB_COUNTER_INCREMENT(aac_config.FibRecved);
+
+ if (hwfib->header.Command == cpu_to_le16(NuFileSystem))
+ {
+ u32 *pstatus = (u32 *)hwfib->data;
+ if (*pstatus & cpu_to_le32(0xffff0000))
+ *pstatus = cpu_to_le32(ST_OK);
+ }
+ if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async))
+ {
+ if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected))
+ FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved);
+ else
+ FIB_COUNTER_INCREMENT(aac_config.AsyncRecved);
+ /*
+ * NOTE: we cannot touch the fib after this
+ * call, because it may have been deallocated.
+ */
+ fib->callback(fib->callback_data, fib);
+ } else {
+ unsigned long flagv;
+ dprintk((KERN_INFO "event_wait up\n"));
+ spin_lock_irqsave(&fib->event_lock, flagv);
+ fib->done = 1;
+ up(&fib->event_wait);
+ spin_unlock_irqrestore(&fib->event_lock, flagv);
+ FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
+ }
+ return 0;
+ }
+}
Index: scsi-rc-aac-1/drivers/scsi/aacraid/linit.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/linit.c 2005-10-19 13:03:53.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/linit.c 2005-10-19 13:04:18.000000000 -0700
@@ -788,8 +788,29 @@
goto out_free_host;
spin_lock_init(&aac->fib_lock);
- if ((*aac_drivers[index].init)(aac))
+ /*
+ * Map in the registers from the adapter.
+ */
+ aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
+ if ((aac->regs.sa = ioremap(
+ (unsigned long)aac->scsi_host_ptr->base, AAC_MIN_FOOTPRINT_SIZE))
+ == NULL) {
+ printk(KERN_WARNING "%s: unable to map adapter.\n",
+ AAC_DRIVERNAME);
goto out_free_fibs;
+ }
+ if ((*aac_drivers[index].init)(aac))
+ goto out_unmap;
+
+ /*
+ * Start any kernel threads needed
+ */
+ aac->thread_pid = kernel_thread((int (*)(void *))aac_command_thread,
+ aac, 0);
+ if (aac->thread_pid < 0) {
+ printk(KERN_ERR "aacraid: Unable to create command thread.\n");
+ goto out_deinit;
+ }
/*
* If we had set a smaller DMA mask earlier, set it to 4gig
@@ -866,10 +887,11 @@
aac_send_shutdown(aac);
aac_adapter_disable_int(aac);
+ free_irq(pdev->irq, aac);
+ out_unmap:
fib_map_free(aac);
pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
kfree(aac->queues);
- free_irq(pdev->irq, aac);
iounmap(aac->regs.sa);
out_free_fibs:
kfree(aac->fibs);
@@ -910,6 +932,7 @@
iounmap(aac->regs.sa);
kfree(aac->fibs);
+ kfree(aac->fsa_dev);
list_del(&aac->entry);
scsi_host_put(shost);
Index: scsi-rc-aac-1/drivers/scsi/aacraid/rkt.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/rkt.c 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/rkt.c 2005-10-19 13:04:18.000000000 -0700
@@ -49,40 +49,57 @@
static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct aac_dev *dev = dev_id;
- unsigned long bellbits;
- u8 intstat, mask;
- intstat = rkt_readb(dev, MUnit.OISR);
- /*
- * Read mask and invert because drawbridge is reversed.
- * This allows us to only service interrupts that have
- * been enabled.
- */
- mask = ~(dev->OIMR);
- /* Check to see if this is our interrupt. If it isn't just return */
- if (intstat & mask)
- {
- bellbits = rkt_readl(dev, OutboundDoorbellReg);
- if (bellbits & DoorBellPrintfReady) {
- aac_printf(dev, rkt_readl(dev, IndexRegs.Mailbox[5]));
- rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
- rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
- }
- else if (bellbits & DoorBellAdapterNormCmdReady) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
- aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
- }
- else if (bellbits & DoorBellAdapterNormRespReady) {
- aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
- rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
- }
- else if (bellbits & DoorBellAdapterNormCmdNotFull) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+
+ if (dev->new_comm_interface) {
+ u32 Index = rkt_readl(dev, MUnit.OutboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rkt_readl(dev, MUnit.OutboundQueue);
+ if (Index != 0xFFFFFFFFL) {
+ do {
+ if (aac_intr_normal(dev, Index)) {
+ rkt_writel(dev, MUnit.OutboundQueue, Index);
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
+ }
+ Index = rkt_readl(dev, MUnit.OutboundQueue);
+ } while (Index != 0xFFFFFFFFL);
+ return IRQ_HANDLED;
}
- else if (bellbits & DoorBellAdapterNormRespNotFull) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ } else {
+ unsigned long bellbits;
+ u8 intstat;
+ intstat = rkt_readb(dev, MUnit.OISR);
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have
+ * been enabled.
+ * Check to see if this is our interrupt. If it isn't just return
+ */
+ if (intstat & ~(dev->OIMR))
+ {
+ bellbits = rkt_readl(dev, OutboundDoorbellReg);
+ if (bellbits & DoorBellPrintfReady) {
+ aac_printf(dev, rkt_readl (dev, IndexRegs.Mailbox[5]));
+ rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+ rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdReady) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+// rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ }
+ else if (bellbits & DoorBellAdapterNormRespReady) {
+ rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ }
+ else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ }
+ return IRQ_HANDLED;
}
- return IRQ_HANDLED;
}
return IRQ_NONE;
}
@@ -173,7 +190,10 @@
/*
* Restore interrupt mask even though we timed out
*/
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ if (dev->new_comm_interface)
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return -ETIMEDOUT;
}
/*
@@ -196,7 +216,10 @@
/*
* Restore interrupt mask
*/
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ if (dev->new_comm_interface)
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return 0;
}
@@ -268,15 +291,6 @@
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
- /*
- * First clear out all interrupts. Then enable the one's that we
- * can handle.
- */
- rkt_writeb(dev, MUnit.OIMR, 0xff);
- rkt_writel(dev, MUnit.ODR, 0xffffffff);
-// rkt_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
-
// We can only use a 32 bit address here
rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
@@ -350,6 +364,39 @@
}
/**
+ * aac_rkt_send
+ * @fib: fib to issue
+ *
+ * Will send a fib, returning 0 if successful.
+ */
+static int aac_rkt_send(struct fib * fib)
+{
+ u64 addr = fib->hw_fib_pa;
+ struct aac_dev *dev = fib->dev;
+ volatile void __iomem *device = dev->regs.rkt;
+ u32 Index;
+
+ dprintk((KERN_DEBUG "%p->aac_rkt_send(%p->%llx)\n", dev, fib, addr));
+ Index = rkt_readl(dev, MUnit.InboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rkt_readl(dev, MUnit.InboundQueue);
+ dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
+ if (Index == 0xFFFFFFFFL)
+ return Index;
+ device += Index;
+ dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
+ (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
+ writel((u32)(addr & 0xffffffff), device);
+ device += sizeof(u32);
+ writel((u32)(addr >> 32), device);
+ device += sizeof(u32);
+ writel(le16_to_cpu(fib->hw_fib->header.Size), device);
+ rkt_writel(dev, MUnit.InboundQueue, Index);
+ dprintk((KERN_DEBUG "aac_rkt_send - return 0\n"));
+ return 0;
+}
+
+/**
* aac_rkt_init - initialize an i960 based AAC card
* @dev: device to configure
*
@@ -369,13 +416,8 @@
name = dev->name;
/*
- * Map in the registers from the adapter.
+ * Check to see if the board panic'd while booting.
*/
- if((dev->regs.rkt = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
- {
- printk(KERN_WARNING "aacraid: unable to map i960.\n" );
- goto error_iounmap;
- }
/*
* Check to see if the board failed any self tests.
*/
@@ -426,6 +468,7 @@
dev->a_ops.adapter_notify = aac_rkt_notify_adapter;
dev->a_ops.adapter_sync_cmd = rkt_sync_cmd;
dev->a_ops.adapter_check_health = aac_rkt_check_health;
+ dev->a_ops.adapter_send = aac_rkt_send;
/*
* First clear out all interrupts. Then enable the one's that we
@@ -437,15 +480,24 @@
if (aac_init_adapter(dev) == NULL)
goto error_irq;
- /*
- * Start any kernel threads needed
- */
- dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
- if(dev->thread_pid < 0)
- {
- printk(KERN_ERR "aacraid: Unable to create rkt thread.\n");
- goto error_kfree;
- }
+ if (dev->new_comm_interface) {
+ /*
+ * FIB Setup has already been done, but we can minimize the
+ * damage by at least ensuring the OS never issues more
+ * commands than we can handle. The Rocket adapters currently
+ * can only handle 246 commands and 8 AIFs at the same time,
+ * and in fact do notify us accordingly if we negotiate the
+ * FIB size. The problem that causes us to add this check is
+ * to ensure that we do not overdo it with the adapter when a
+ * hard coded FIB override is being utilized. This special
+ * case warrants this half baked, but convenient, check here.
+ */
+ if (dev->scsi_host_ptr->can_queue > (246 - AAC_NUM_MGT_FIB)) {
+ dev->init->MaxIoCommands = cpu_to_le32(246);
+ dev->scsi_host_ptr->can_queue = 246 - AAC_NUM_MGT_FIB;
+ }
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ }
/*
* Tell the adapter that all is configured, and it can start
* accepting requests
@@ -453,15 +505,11 @@
aac_rkt_start_adapter(dev);
return 0;
-error_kfree:
- kfree(dev->queues);
-
error_irq:
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
- iounmap(dev->regs.rkt);
return -1;
}
Index: scsi-rc-aac-1/drivers/scsi/aacraid/rx.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/rx.c 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/rx.c 2005-10-19 13:04:18.000000000 -0700
@@ -49,40 +49,57 @@
static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct aac_dev *dev = dev_id;
- unsigned long bellbits;
- u8 intstat, mask;
- intstat = rx_readb(dev, MUnit.OISR);
- /*
- * Read mask and invert because drawbridge is reversed.
- * This allows us to only service interrupts that have
- * been enabled.
- */
- mask = ~(dev->OIMR);
- /* Check to see if this is our interrupt. If it isn't just return */
- if (intstat & mask)
- {
- bellbits = rx_readl(dev, OutboundDoorbellReg);
- if (bellbits & DoorBellPrintfReady) {
- aac_printf(dev, rx_readl(dev, IndexRegs.Mailbox[5]));
- rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
- rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
- }
- else if (bellbits & DoorBellAdapterNormCmdReady) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
- aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
- }
- else if (bellbits & DoorBellAdapterNormRespReady) {
- aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
- rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
- }
- else if (bellbits & DoorBellAdapterNormCmdNotFull) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+
+ dprintk((KERN_DEBUG "aac_rx_intr(%d,%p,%p)\n", irq, dev_id, regs));
+ if (dev->new_comm_interface) {
+ u32 Index = rx_readl(dev, MUnit.OutboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rx_readl(dev, MUnit.OutboundQueue);
+ if (Index != 0xFFFFFFFFL) {
+ do {
+ if (aac_intr_normal(dev, Index)) {
+ rx_writel(dev, MUnit.OutboundQueue, Index);
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
+ }
+ Index = rx_readl(dev, MUnit.OutboundQueue);
+ } while (Index != 0xFFFFFFFFL);
+ return IRQ_HANDLED;
}
- else if (bellbits & DoorBellAdapterNormRespNotFull) {
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ } else {
+ unsigned long bellbits;
+ u8 intstat;
+ intstat = rx_readb(dev, MUnit.OISR);
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have
+ * been enabled.
+ * Check to see if this is our interrupt. If it isn't just return
+ */
+ if (intstat & ~(dev->OIMR))
+ {
+ bellbits = rx_readl(dev, OutboundDoorbellReg);
+ if (bellbits & DoorBellPrintfReady) {
+ aac_printf(dev, rx_readl (dev, IndexRegs.Mailbox[5]));
+ rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+ rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdReady) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormRespReady) {
+ rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ }
+ else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ }
+ return IRQ_HANDLED;
}
- return IRQ_HANDLED;
}
return IRQ_NONE;
}
@@ -173,7 +190,10 @@
/*
* Restore interrupt mask even though we timed out
*/
- rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
+ if (dev->new_comm_interface)
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return -ETIMEDOUT;
}
/*
@@ -196,7 +216,10 @@
/*
* Restore interrupt mask
*/
- rx_writeb(dev, MUnit.OIMR, dev->OIMR &= 0xfb);
+ if (dev->new_comm_interface)
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return 0;
}
@@ -267,15 +290,6 @@
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
- /*
- * First clear out all interrupts. Then enable the one's that we
- * can handle.
- */
- rx_writeb(dev, MUnit.OIMR, 0xff);
- rx_writel(dev, MUnit.ODR, 0xffffffff);
-// rx_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
- rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
-
// We can only use a 32 bit address here
rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
@@ -349,6 +363,39 @@
}
/**
+ * aac_rx_send
+ * @fib: fib to issue
+ *
+ * Will send a fib, returning 0 if successful.
+ */
+static int aac_rx_send(struct fib * fib)
+{
+ u64 addr = fib->hw_fib_pa;
+ struct aac_dev *dev = fib->dev;
+ volatile void __iomem *device = dev->regs.rx;
+ u32 Index;
+
+ dprintk((KERN_DEBUG "%p->aac_rx_send(%p->%llx)\n", dev, fib, addr));
+ Index = rx_readl(dev, MUnit.InboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rx_readl(dev, MUnit.InboundQueue);
+ dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
+ if (Index == 0xFFFFFFFFL)
+ return Index;
+ device += Index;
+ dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
+ (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
+ writel((u32)(addr & 0xffffffff), device);
+ device += sizeof(u32);
+ writel((u32)(addr >> 32), device);
+ device += sizeof(u32);
+ writel(le16_to_cpu(fib->hw_fib->header.Size), device);
+ rx_writel(dev, MUnit.InboundQueue, Index);
+ dprintk((KERN_DEBUG "aac_rx_send - return 0\n"));
+ return 0;
+}
+
+/**
* aac_rx_init - initialize an i960 based AAC card
* @dev: device to configure
*
@@ -368,13 +415,8 @@
name = dev->name;
/*
- * Map in the registers from the adapter.
+ * Check to see if the board panic'd while booting.
*/
- if((dev->regs.rx = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
- {
- printk(KERN_WARNING "aacraid: unable to map i960.\n" );
- return -1;
- }
/*
* Check to see if the board failed any self tests.
*/
@@ -426,6 +468,7 @@
dev->a_ops.adapter_notify = aac_rx_notify_adapter;
dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
dev->a_ops.adapter_check_health = aac_rx_check_health;
+ dev->a_ops.adapter_send = aac_rx_send;
/*
* First clear out all interrupts. Then enable the one's that we
@@ -437,15 +480,9 @@
if (aac_init_adapter(dev) == NULL)
goto error_irq;
- /*
- * Start any kernel threads needed
- */
- dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
- if(dev->thread_pid < 0)
- {
- printk(KERN_ERR "aacraid: Unable to create rx thread.\n");
- goto error_kfree;
- }
+ if (dev->new_comm_interface)
+ rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+
/*
* Tell the adapter that all is configured, and it can start
* accepting requests
@@ -453,15 +490,11 @@
aac_rx_start_adapter(dev);
return 0;
-error_kfree:
- kfree(dev->queues);
-
error_irq:
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
- iounmap(dev->regs.rx);
return -1;
}
Index: scsi-rc-aac-1/drivers/scsi/aacraid/sa.c
===================================================================
--- scsi-rc-aac-1.orig/drivers/scsi/aacraid/sa.c 2005-10-19 13:03:36.000000000 -0700
+++ scsi-rc-aac-1/drivers/scsi/aacraid/sa.c 2005-10-19 13:04:18.000000000 -0700
@@ -237,29 +237,16 @@
static void aac_sa_start_adapter(struct aac_dev *dev)
{
- u32 ret;
struct aac_init *init;
/*
* Fill in the remaining pieces of the init.
*/
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
-
- /*
- * Tell the adapter we are back and up and running so it will scan its command
- * queues and enable our interrupts
- */
- dev->irq_mask = (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4);
- /*
- * First clear out all interrupts. Then enable the one's that
- * we can handle.
- */
- sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
- sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
/* We can only use a 32 bit address here */
sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
(u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0,
- &ret, NULL, NULL, NULL, NULL);
+ NULL, NULL, NULL, NULL, NULL);
}
/**
@@ -314,15 +301,6 @@
name = dev->name;
/*
- * Map in the registers from the adapter.
- */
-
- if((dev->regs.sa = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
- {
- printk(KERN_WARNING "aacraid: unable to map ARM.\n" );
- goto error_iounmap;
- }
- /*
* Check to see if the board failed any self tests.
*/
if (sa_readl(dev, Mailbox7) & SELF_TEST_FAILED) {
@@ -378,31 +356,17 @@
goto error_irq;
/*
- * Start any kernel threads needed
- */
- dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
- if (dev->thread_pid < 0) {
- printk(KERN_ERR "aacraid: Unable to create command thread.\n");
- goto error_kfree;
- }
-
- /*
* Tell the adapter that all is configure, and it can start
* accepting requests
*/
aac_sa_start_adapter(dev);
return 0;
-
-error_kfree:
- kfree(dev->queues);
-
error_irq:
sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
- iounmap(dev->regs.sa);
return -1;
}
--
Mark Haverkamp <markh@xxxxxxxx>
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
