On Friday, September 30, 2005 6:27 PM, Chen, Kenneth W wrote:
Chen, Kenneth W wrote on Thursday, September 29, 2005 11:59 AM
Something happened in between kernel 2.6.12 and 2.6.14-rc2, where
disk performance went 20X slower on the latest release kernel. I
suspect it has something to do with the fusion driver. This showed
up in the boot log: "mptscsih: ioc0: DV: Release failed." is it
significant?
I think the bug is for real, and it is in the mpt fusion driver. I'm
not an expert of LSI53C1030 host controller, and I won't pretend to be
one. Though I have data to show what is going on:
There are two threads during driver initialization. One does domain
validation (mptscsih_domainValidation) and one does host controller
initialization (mptspi_probe). During 2nd host controller bringup,
i.e., bringing up ioc1, it temporary disables first channel (ioc0).
However, DV is in progress on ioc0 in another thread (and possibly
running on another CPU). The effect of disabling ioc0 during in-
progress-domain-validation is that it causes all subsequent DV
commands to fail and resulting lowest possible performance setting
for almost all disks pending DV.
Here is a fix that I propose: for the period that ioc0 need to be
disabled for bringing up ioc1, ioc->active is marked with a special
flag and have DV thread busy wait on that flag. This avoid mptspi_probe
thread clash into the DV thread causing brain-damage to DV.
With the patch, all disks are up to the performance expectation and it
also fixed the "mptscsih: ioc0: DV: Release failed" error message.
Thanks for you findings into this.
I'm moving across town, and will not be in the office, nor have
internet access for the next couple days. I will look into this when I
return.
Best regards,
Eric Moore
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
