On Sat, 24 Sep 2005 17:48:23 +0100 Matthew Garrett wrote: > ACPI provides a mechanism for noting which devices can be hotswapped and > notifying the system that this has happened. Hotswappable devices are > tagged with a _RMV token. What effectively needs to be done is this: > > 1) Find every device with an _RMV token, and install a notify handler > for it. This is fairly easy. > > 2) On notification, check whether the device is present or absent. This > can be done by calling the _STA method - alternatively it could > presumably be done through the appropriate IDE or SCSI layer. I believe > that we now have code that allows binding of ACPI devices to appropriate > busses. > > 3) If a device has been added, enumerate it and do appropriate messaging > to userspace (for device node creation and so forth). This ought to be > relatively easy? > > 4) If a device has been removed, we currently have problems. SATA > hotplugging is only supported on a subset of devices. The SATA laptop I > have here is an Intel ICH part, but uses the ata_piix driver (ahci won't > load) which isn't supposed to support hotswap. Unregistering devices in > the IDE layer has been broken for ages. Do you know why the ahci driver won't load? Are there any BIOS setup options for enabling AHCI native mode vs. legacy or compatibility mode? > Is there any point in working on the first three of these points until > point four is more reasonable? What actually needs to be done to improve > this? --- ~Randy You can't do anything without having to do something else first. -- Belefant's Law - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
