.. and the fusion part. I had to move around the debug functions around
a little bit so they are below the transport class methods.
Signed-off-by: Christoph Hellwig <hch@xxxxxx>
Index: linux-2.6/drivers/message/fusion/mptsas.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptsas.c 2005-09-19 17:05:55.000000000 +0200
+++ linux-2.6/drivers/message/fusion/mptsas.c 2005-09-19 21:51:45.000000000 +0200
@@ -123,6 +123,101 @@
struct mptsas_phyinfo *phy_info;
};
+
+#ifdef SASDEBUG
+static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
+{
+ printk("---- IO UNIT PAGE 0 ------------\n");
+ printk("Handle=0x%X\n",
+ le16_to_cpu(phy_data->AttachedDeviceHandle));
+ printk("Controller Handle=0x%X\n",
+ le16_to_cpu(phy_data->ControllerDevHandle));
+ printk("Port=0x%X\n", phy_data->Port);
+ printk("Port Flags=0x%X\n", phy_data->PortFlags);
+ printk("PHY Flags=0x%X\n", phy_data->PhyFlags);
+ printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate);
+ printk("Controller PHY Device Info=0x%X\n",
+ le32_to_cpu(phy_data->ControllerPhyDeviceInfo));
+ printk("DiscoveryStatus=0x%X\n",
+ le32_to_cpu(phy_data->DiscoveryStatus));
+ printk("\n");
+}
+
+static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0)
+{
+ __le64 sas_address;
+
+ memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
+
+ printk("---- SAS PHY PAGE 0 ------------\n");
+ printk("Attached Device Handle=0x%X\n",
+ le16_to_cpu(pg0->AttachedDevHandle));
+ printk("SAS Address=0x%llX\n",
+ (unsigned long long)le64_to_cpu(sas_address));
+ printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier);
+ printk("Attached Device Info=0x%X\n",
+ le32_to_cpu(pg0->AttachedDeviceInfo));
+ printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate);
+ printk("Change Count=0x%X\n", pg0->ChangeCount);
+ printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo));
+ printk("\n");
+}
+
+static void mptsas_print_phy_pg1(SasPhyPage1_t *pg1)
+{
+ printk("---- SAS PHY PAGE 1 ------------\n");
+ printk("Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount);
+ printk("Running Disparity Error Count=0x%x\n",
+ pg1->RunningDisparityErrorCount);
+ printk("Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount);
+ printk("PHY Reset Problem Count=0x%x\n", pg1->PhyResetProblemCount);
+ printk("\n");
+}
+
+static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
+{
+ __le64 sas_address;
+
+ memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
+
+ printk("---- SAS DEVICE PAGE 0 ---------\n");
+ printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
+ printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
+ printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
+ printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
+ printk("Target ID=0x%X\n", pg0->TargetID);
+ printk("Bus=0x%X\n", pg0->Bus);
+ printk("PhyNum=0x%X\n", pg0->PhyNum);
+ printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
+ printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
+ printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
+ printk("Physical Port=0x%X\n", pg0->PhysicalPort);
+ printk("\n");
+}
+
+static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
+{
+ printk("---- SAS EXPANDER PAGE 1 ------------\n");
+
+ printk("Physical Port=0x%X\n", pg1->PhysicalPort);
+ printk("PHY Identifier=0x%X\n", pg1->Phy);
+ printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
+ printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
+ printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
+ printk("Owner Device Handle=0x%X\n",
+ le16_to_cpu(pg1->OwnerDevHandle));
+ printk("Attached Device Handle=0x%X\n",
+ le16_to_cpu(pg1->AttachedDevHandle));
+}
+#else
+#define mptsas_print_phy_data(phy_data) do { } while (0)
+#define mptsas_print_phy_pg0(pg0) do { } while (0)
+#define mptsas_print_phy_pg1(pg1) do { } while (0)
+#define mptsas_print_device_pg0(pg0) do { } while (0)
+#define mptsas_print_expander_pg1(pg1) do { } while (0)
+#endif
+
+
/*
* This is pretty ugly. We will be able to seriously clean it up
* once the DV code in mptscsih goes away and we can properly
@@ -200,91 +295,76 @@
.use_clustering = ENABLE_CLUSTERING,
};
-static struct sas_function_template mptsas_transport_functions = {
-};
-
-static struct scsi_transport_template *mptsas_transport_template;
-
-#ifdef SASDEBUG
-static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
+static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
{
- printk("---- IO UNIT PAGE 0 ------------\n");
- printk("Handle=0x%X\n",
- le16_to_cpu(phy_data->AttachedDeviceHandle));
- printk("Controller Handle=0x%X\n",
- le16_to_cpu(phy_data->ControllerDevHandle));
- printk("Port=0x%X\n", phy_data->Port);
- printk("Port Flags=0x%X\n", phy_data->PortFlags);
- printk("PHY Flags=0x%X\n", phy_data->PhyFlags);
- printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate);
- printk("Controller PHY Device Info=0x%X\n",
- le32_to_cpu(phy_data->ControllerPhyDeviceInfo));
- printk("DiscoveryStatus=0x%X\n",
- le32_to_cpu(phy_data->DiscoveryStatus));
- printk("\n");
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
}
-static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0)
+static int mptsas_get_linkerrors(struct sas_phy *phy)
{
- __le64 sas_address;
+ MPT_ADAPTER *ioc = phy_to_ioc(phy);
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasPhyPage1_t *buffer;
+ dma_addr_t dma_handle;
+ int error;
- memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
+ hdr.PageVersion = MPI_SASPHY1_PAGEVERSION;
+ hdr.ExtPageLength = 0;
+ hdr.PageNumber = 1 /* page number 1*/;
+ hdr.Reserved1 = 0;
+ hdr.Reserved2 = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY;
- printk("---- SAS PHY PAGE 0 ------------\n");
- printk("Attached Device Handle=0x%X\n",
- le16_to_cpu(pg0->AttachedDevHandle));
- printk("SAS Address=0x%llX\n",
- (unsigned long long)le64_to_cpu(sas_address));
- printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier);
- printk("Attached Device Info=0x%X\n",
- le32_to_cpu(pg0->AttachedDeviceInfo));
- printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate);
- printk("Change Count=0x%X\n", pg0->ChangeCount);
- printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo));
- printk("\n");
-}
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.pageAddr = phy->identify.phy_identifier;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
-static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
-{
- __le64 sas_address;
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ return error;
+ if (!hdr.ExtPageLength)
+ return -ENXIO;
- memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64));
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer)
+ return -ENOMEM;
- printk("---- SAS DEVICE PAGE 0 ---------\n");
- printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
- printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
- printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
- printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
- printk("Target ID=0x%X\n", pg0->TargetID);
- printk("Bus=0x%X\n", pg0->Bus);
- printk("PhyNum=0x%X\n", pg0->PhyNum);
- printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
- printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
- printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
- printk("Physical Port=0x%X\n", pg0->PhysicalPort);
- printk("\n");
-}
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
-static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
-{
- printk("---- SAS EXPANDER PAGE 1 ------------\n");
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
- printk("Physical Port=0x%X\n", pg1->PhysicalPort);
- printk("PHY Identifier=0x%X\n", pg1->Phy);
- printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
- printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
- printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
- printk("Owner Device Handle=0x%X\n",
- le16_to_cpu(pg1->OwnerDevHandle));
- printk("Attached Device Handle=0x%X\n",
- le16_to_cpu(pg1->AttachedDevHandle));
+ mptsas_print_phy_pg1(buffer);
+
+ phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount);
+ phy->running_disparity_error_count =
+ le32_to_cpu(buffer->RunningDisparityErrorCount);
+ phy->loss_of_dword_sync_count =
+ le32_to_cpu(buffer->LossDwordSynchCount);
+ phy->phy_reset_problem_count =
+ le32_to_cpu(buffer->PhyResetProblemCount);
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ return error;
}
-#else
-#define mptsas_print_phy_data(phy_data) do { } while (0)
-#define mptsas_print_phy_pg0(pg0) do { } while (0)
-#define mptsas_print_device_pg0(pg0) do { } while (0)
-#define mptsas_print_expander_pg1(pg1) do { } while (0)
-#endif
+
+
+static struct sas_function_template mptsas_transport_functions = {
+ .get_linkerrors = mptsas_get_linkerrors,
+};
+
+static struct scsi_transport_template *mptsas_transport_template;
static int
mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
