On Fri, 2005-09-16 at 12:03 -0700, Andrew Morton wrote: > This one's a bit strange. > > It's a post-2.6.12 regression. Yes, strange to me too. The changes that went in to aic79xx between 2.6.12 and 2.6.13 were tiny: aic79xx_osm.c | 18 +++++++++--------- aic79xx_osm.h | 17 ----------------- aic79xx_pci.c | 2 +- 3 files changed, 10 insertions(+), 27 deletions(-) I've also attached them below, but I think they were 1) #if -> #ifdef changes 2) removal of the duplicated ENDIAN macros 3) ahd_midlayer_entrypoint_lock/unlock -> ahd_lock/unlock I can't see how anything in these could produce the shown behaviour. James diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -1505,23 +1505,23 @@ ahd_linux_dev_reset(Scsi_Cmnd *cmd) memset(recovery_cmd, 0, sizeof(struct scsi_cmnd)); recovery_cmd->device = cmd->device; recovery_cmd->scsi_done = ahd_linux_dev_reset_complete; -#if AHD_DEBUG +#ifdef AHD_DEBUG if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) printf("%s:%d:%d:%d: Device reset called for cmd %p\n", ahd_name(ahd), cmd->device->channel, cmd->device->id, cmd->device->lun, cmd); #endif - ahd_midlayer_entrypoint_lock(ahd, &s); + ahd_lock(ahd, &s); dev = ahd_linux_get_device(ahd, cmd->device->channel, cmd->device->id, cmd->device->lun, /*alloc*/FALSE); if (dev == NULL) { - ahd_midlayer_entrypoint_unlock(ahd, &s); + ahd_unlock(ahd, &s); kfree(recovery_cmd); return (FAILED); } if ((scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX)) == NULL) { - ahd_midlayer_entrypoint_unlock(ahd, &s); + ahd_unlock(ahd, &s); kfree(recovery_cmd); return (FAILED); } @@ -1553,7 +1553,7 @@ ahd_linux_dev_reset(Scsi_Cmnd *cmd) ahd_queue_scb(ahd, scb); scb->platform_data->flags |= AHD_SCB_UP_EH_SEM; - spin_unlock_irq(&ahd->platform_data->spin_lock); + ahd_unlock(ahd, &s); init_timer(&timer); timer.data = (u_long)scb; timer.expires = jiffies + (5 * HZ); @@ -1567,10 +1567,10 @@ ahd_linux_dev_reset(Scsi_Cmnd *cmd) printf("Timer Expired\n"); retval = FAILED; } - spin_lock_irq(&ahd->platform_data->spin_lock); + ahd_lock(ahd, &s); ahd_schedule_runq(ahd); ahd_linux_run_complete_queue(ahd); - ahd_midlayer_entrypoint_unlock(ahd, &s); + ahd_unlock(ahd, &s); printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval); return (retval); } @@ -1591,11 +1591,11 @@ ahd_linux_bus_reset(Scsi_Cmnd *cmd) printf("%s: Bus reset called for cmd %p\n", ahd_name(ahd), cmd); #endif - ahd_midlayer_entrypoint_lock(ahd, &s); + ahd_lock(ahd, &s); found = ahd_reset_channel(ahd, cmd->device->channel + 'A', /*initiate reset*/TRUE); ahd_linux_run_complete_queue(ahd); - ahd_midlayer_entrypoint_unlock(ahd, &s); + ahd_unlock(ahd, &s); if (bootverbose) printf("%s: SCSI bus reset delivered. " diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h --- a/drivers/scsi/aic7xxx/aic79xx_osm.h +++ b/drivers/scsi/aic7xxx/aic79xx_osm.h @@ -112,23 +112,6 @@ typedef Scsi_Cmnd *ahd_io_ctx_t; #define ahd_le32toh(x) le32_to_cpu(x) #define ahd_le64toh(x) le64_to_cpu(x) -#ifndef LITTLE_ENDIAN -#define LITTLE_ENDIAN 1234 -#endif - -#ifndef BIG_ENDIAN -#define BIG_ENDIAN 4321 -#endif - -#ifndef BYTE_ORDER -#if defined(__BIG_ENDIAN) -#define BYTE_ORDER BIG_ENDIAN -#endif -#if defined(__LITTLE_ENDIAN) -#define BYTE_ORDER LITTLE_ENDIAN -#endif -#endif /* BYTE_ORDER */ - /************************* Configuration Data *********************************/ extern uint32_t aic79xx_allow_memio; extern int aic79xx_detect_complete; diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c --- a/drivers/scsi/aic7xxx/aic79xx_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c @@ -582,7 +582,7 @@ ahd_check_extport(struct ahd_softc *ahd) } } -#if AHD_DEBUG +#ifdef AHD_DEBUG if (have_seeprom != 0 && (ahd_debug & AHD_DUMP_SEEPROM) != 0) { uint16_t *sc_data; - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html